이 연구의 목적은 가상 리얼리티 프로그램의 장르적 특성은 무엇인지 밝히는 데 있다. 이를 위해 문화방송의 '일요일 일요일 밤에' 1부에 방송되었던 '우리 결혼했어요'의 텍스트를 1회부터 8회까지 분석하였다. 분석결과 이 프로그램은 가상 부부 생활의 영상과 스튜디오에 등장하는 현실에 존재하는 연예인의 현재성을 병치시킴으로써 가상과 현실을 혼용하고 있었다. 또한 다양한 부류의 부부유형을 설정하여, 미션을 통해 각 유형의 연예인 커플들이 실제 부부간에 일어날 수 있는 사랑과 갈등을 보여줌으로써 결혼에 대한 환상과 현실감을 동시에 충족시켜 주면서 수용자와 공감대를 형성해가고 있었다. 한편 공적 공간인 텔레비전에서 출연자들이 사적 감정을 고백함으로써 공적 영역과 사적 영역의 경계가 해체됨을 보여주고 있다. 이와 함께 물질이나 노력, 제스처, 언어 등 배우자에게 선사하는 크고 작은 감동을 통해 수용자들은 대리만족을 느끼며 즐거움을 고취시켜 오락성을 실현하였다. 가상 리얼리티 프로그램에는 진실성, 허구성, 오락성이 혼용되어 나타나고 있으며 이러한 장르적 특성은 경계의 해체와 장르적 모호함을 토대로 수용자에게 소구하는 중요한 전략으로 작용하고 있음을 알 수 있다.
Numerical simulations and experiments have been carried out to investigate the effect of fuel injection nozzles on the combustion and NOx formation processes in a medium-speed marine diesel engine. Spray visualization experiment was performed in the constant-volume high-pressure chamber to verify the numerical results on the spray characteristics such as spray angle and spray tip penetration. Time-resolved spray behaviors were captured by high-speed digital camera and analyzed to extract the information on the spray parameters. Spray and combustion phenomena were examined numerically using FIRE code. Wave breakup and Zeldovich models were adopted to describe the atomization characteristics and NOx formation processes. Numerical results were verified with experimental data such as cylinder pressure, heat release rate and NOx emission. Finally, the effects of fuel injection nozzles on the engine performance were investigated numerically to find the optimum nozzle parameters such as fuel injection angle, nozzle hole diameter and number of nozzle holes. From this study, the optimum fuel injection nozzle (nozzle hole diameter, 0.32 mm, number of nozzle holes, 8 and fuel injection angle, $148^{\circ}$) was selected to reduce both the fuel consumption and NOx emission. The reason for this selection could be explained from the highest fuel-air mixing in the early phase of injection due to the longest spray tip penetration and the highest heat release rate after $19^{\circ}$ ATDC due to the increased injection duration.
The purpose of this study was to identify the impact of generation on the traditional food culture of Uzbekistan-Koreans. The generation of Uzbekistan-Koreans was divided into two groups i.e., the second and third generation. The second generation suffered from the compulsory emigration during 1930s because of the minority racial breakup policy by the Soviet Russia. The third generation was born after the compulsory emigration and the economic condition was much better for them. In terms of identifying traditional food culture, generation was an important factor because each generation had different social environments and different life styles. Data were collected from 634 Koreans living in Uzbekistan and analyzed by chi-square and correlation analysis. The results of this study revealed that the impact of generation was an important factor regarding the traditional food culture. Chi-square analysis showed that factors related to making a menu, food priority, and consideration of the person preparing the food were likely to vary depending on the generation. Also, reasons for preferring traditional food and preparing foods for family events as well as national holidays were different between the second and the third generation. The second generation preferred traditional food because of flavor, while the third generation preferred traditional food because of nutrition. For family events and national holidays such as New Year's Day, the second generation was more likely to prepare traditional foods than the third generation. The correlation analysis indicated that the relationship between preference and intake frequency of traditional foods was positively related, and the degree of correlation was higher for the second than the third generation. Similarities and differences between generations were discussed, and implications for food and nutrition specialists and food marketers were provided.
Kim, Yoonyoung;Ishiguro, Masateru;Michikami, Tatsuhiro;Nakamura, Akiko M.
천문학회보
/
제41권1호
/
pp.49.1-49.1
/
2016
Solar System has evolved with numerous collisions among asteroids. Ancient catastrophic collisions of large parent bodies led the formation of asteroid families and relevant dustband structures up to the present day, and it would be interesting to address a question - "what happens if an asteroid collides with another asteroid?" Recent discoveries of "active asteroids" in the main-belt have attracted interest for their potential to witness a catastrophic collision in the current Solar System. So far, however, there is no direct evidence for catastrophic collision on active asteroids while several objects have been confirmed for other mechanisms (e.g., 596 Scheila for impact cratering, P/2013 R3 and P/2013 P5 for rotational breakup). The most potential candidate for catastrophic collision could be a sub-km active asteroid P/2010 A2, which is still controversial on its driving mechanism, but if confirmed, would have made P/2010 A2 the unique example of catastrophic collision on the current main asteroid belt. In this presentation, we revisit all of archival data of P/2010 A2 in a combination with our own observation using Subaru/Suprime-Cam on 2011 June, where we have a great benefit of a large orbital coverage. We found a grain size dependence of dust ejection velocity from P/2010 A2 (a power-law size distribution with an index of k~ -1/10), which is favorable to a catastrophic disruption scenario in agreement with laboratory impact experiments. At this conference, we plan to provide our understanding of the morphology of P/2010 A2 through a perspective of catastrophic collision.
A 3-D axisymmetric computer program is developed to predict the NO behavior in SNCR system for the stoker incinerator with the waste treatment capacity, 200ton/day. To this end a turbulent reacting flow field calculation is made using proper assumption and empiricism. The stoker bed is assumed to be a homogeneous waste-volatilized gaseous state. The initial composition or reactants are assumed based on the data of the ultimate analysis. Turbulent is resolved by k-e model and turbulent reaction is handled by eddy-breakup model harmonized with empirical chemistry data for gaseous combustion, NO and urea reaction. The liquid droplet is traced by Lagrangian method incorporated by aerodynamic drag, Coriolis and crntrifugal forces. Radiation is treated by sensible heat loss model. Calculation results are in good agreement with experimental data at the outlet of post combustion chamber in Daejon 4th industrial complex. The flue gas shows the temperature range of $900\sim1000^{\circ}C$, velocity of 5m/s and NO concentration of 140ppm at the exit while the measured temperature, flue gas velocity and NO concentration are $967^{\circ}C$, $3\sim4m/s$ and $100\sim200ppm$respectively. Using the developed computer program a parametric study has been made with the variation of heat content of waste, castable length and SNCR variables for the determination of proper injector location. In general, the calculated results are consistent and physically acceptable.
최근 들어 기업 환경에서 아웃소싱(outsourcing)이라는 단어가 많이 사용되고 있다. IMF와 함께 몰아닥친 불황은 기업의 불필요한 조직을 축소하는 구조조정을 하게 하였고 우리 기 업이 가지고 있던 '고비용 저효율' (비효율적이고 비경제적인 생산방식)의 구조를 무너뜨리는 기회를 제공하였다. 이러한 환경 변화는 건설업에서도 예외가 아니었으며 이미 하도급, 외주, 하청이라는 단어로 많은 부분에서 아웃소싱 비율은 증가되어 시행되고 있다. 건설업에서의 성공적인 아웃소싱을 위해서는 상호간의 긴밀한 유대관계와 협조가 선행되어야 하며 이러한 관계를 개선시켜 주는 도구중의 하나가 JIT 시스템이라 할 수 있다. 본 연구에서는 건설업에서의 아웃소싱이 차지하는 비율과 그 중요성을 인식하고, JIT 시스템이 건설업에서 적용될 수 있는 효용성과 요소를 체계적으로 검토하여 궁극적으로 생산성을 향상시킬 수 있는 통합 프로세스를 제안하였다.
In this study, the densification behavior and microstructural evolution of CuO were examined when this material was sintered at different temperatures in $O_2$, air and Ar atmospheres. The CuO samples maintained their phases even after prolonged sintering at $900-1100^{\circ}C$ in an oxygen atmosphere. When sintering in air, the densification was faster than it was when sintering in oxygen. However, when the samples were sintered at $1100^{\circ}C$, large pores were observed in the sample due to the phase transformation from CuO to $Cu_2O$ which accompanies the generation of oxygen gas. The pore channels in the sample became narrower as the sintering time increased, eventually undergoing a Rayleigh breakup and forming discrete isolated pores. On the other hand, CuO sintering in Ar did not contribute to the densification, as all CuO samples underwent a phase transformation to $Cu_2O$ during the heating process.
한라산 백록담 분화구에 분포하는 유상 구조토 가운데 마운드의 내부 토양이 노출되어 있는 프로스트 스카를 대상으로 유상 구조토의 붕괴 프로세스를 살펴보고 이 프로세스에 영향을 미치는 요인을 조사하였다. 유상 구조토는 마운드 정상부에 초기 나지가 생기고 이 나지로부터 토양 입자가 제거되면서 요형의 미지형으로 발달한다. 요형의 나지는 옆으로 확대될 뿐 아니라 아래쪽으로도 깊어져 결국 마운드의 해체로 이어진다. 유상 구조토의 붕괴에는 여러 요인이 작용하고 있으나 그 중심에는 동결작용이 놓여 있다 하루 주기의 동결융해가 빈번하게 출현하는 시기에 발생하는 서릿발은 토양 표층을 들어올려 토양 입자를 이완시킴으로써 나지의 확대를 초래하며 특히 융해기에 유상 구조토 토층의 함수비가 높아지므로 서릿발의 발생을 돕는다. 또한 취식작용도 유상 구조토의 붕괴를 일으키는 요인으로서 한라산 정상 일대는 강풍 환경에 늘여 있을 뿐 아니라 암갈색 토층이 제거된 프로스트 스카의 나지 표면이 세력으로 덮여 있는 점으로부터 바람의 영향을 확인할 수 있다. 프로스트 스카의 나지와 마운드가 완전히 붕괴되어 흔적만 남아 있는 장소에는 고사한 눈향나무가 나타나고 있어 유상 구조토의 붕괴에 지구 온난화가 영향을 미치고 있을 가능성도 있다.
최근 급속도로 보급되고 있는 스마트폰과 SNS(Social Network Service)로 인한 인터넷 응용프로그램 활용의 증가는 3G 네트워크 이상의 네트워크 대역폭을 빠르게 잠식해가고 있으며 이로 인한 속도 저하와 서비스 질 저하로 인한 기간통신사들의 시설투자비 증가 요구가 강하게 대두되고 있다. 아울러 모바일 네트워크 사용자의 폭증에 따르는 모바일 서비스 제공자와 모바일 네트워크상의 ID관리문제를 촉발하고 있다. 본 논문은 3G 네트워크에서 모바일 인터넷 응용 서비스상의 사용자 ID관리와 보안문제를 해결하기 위한 프로토콜로 제안된 IDM3G[1]를 기반으로 보다 향상된 인증관리 프로토콜을 제안한다. 제안하는 $I^2DM$ 프로토콜은 기존의 IDM3G 프로토콜이 MO를 통한 상호 인증을 수행하면서 발생시키는 부하를 모바일 인터넷 응용 서비스 제공자에게 일정 부분의 역할을 분산시킴으로써 모바일 및 서비스 제공자의 ID관리와 함께 네트워크 부하와 정보처리를 위한 프로세스 부하 그리고 송수신되는 패킷의 수를 보다 효율화한다. 향후 더욱 그 수요가 폭증할 것으로 예상되는 3G 이후의 모바일 네트워크에 대한 수요를 대비하여 보다 최적화된 프로토콜을 제안한다.
미생물 합성 poly[(R)3-hydroxybutyrate]](P(3HB))의 알칼리 및 효소 분해거동을 단결정과 Langmuir 단분자막을 모델시스템으로 하여 연구하였다. 단결정의 초기효소 및 알칼리 분해거동은 단결정의 장축에 대해 수직방향(b축)으로 분해가 일어났고 용융점 이하의 온도에서 열처리 또한 단결정의 b축을 따라 봉우리 형태의 형태학적 변화를 관찰하였다. 이러한 결과는 라멜라 단결정은 b축을 따라 불규칙한 영역을 가지고 있음을 의미하고 효소분해가 불규칙한 영역에서 선호적으로 일어난다고 설명할 수 있다. 한편, P(3HB), 단분자막의 효소 및 알칼리 분해경향은 분해매체와 표면압력에 크게 의존하였다. 알칼리 분해의 경우 낮은 표면압력에서도 분해를 나타내는 반면 효소 분해는 높은 표면 압력 하에서 분해거동을 나타내었다. 이러한 현상은 분자수준의 크기인 알칼리 분해매체는 P(3HB) 단분자막과 좁은 접촉면적(낮은 표면압력)에서도 활성을 보이는 반면 크기가 큰 분해효소는 보다 큰 활성 접촉면적(높은 표면압력)을 필요로 하는 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.