• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.737-742
• /
• 1998

The tension stiffening effect is defined as the increase in stiffness in reinforced concrete member due to the stiffness provided by concrete between cracks. If this is disregarded in analysis of reinforced concrete members, especially at the level of service loads, member stiffnesses may be underestimated considerably. This paper presents on the failure behavior and tension stiffening of RC tension test with main variables such as concrete strength, rebar diameter and strength. The tension stiffening was analyzed from the load-displacement relationship by ACI code and the proposed by Collins & Mitchell. In summary, the effect of tension stiffening decrease rapidly as the rebar diameter increase, rebar strength increase, and concrete strength increase. The effect of tension stiffening on RC member is the biggest near the behavior of concrete cracking and decrease as the load close to the breaking point. Thus, the tension stiffening should be considered for the precise analysis near the load of concrete cracking.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.2
• /
• pp.276-282
• /
• 2012

This study looked for Mode status of each for fatigue crack growth behavior about the repeat load of mode I and the static load of mode II. The experiment was performed in the state of the repetition frequency of the sine wave 10Hz, the stress ratio 0.1, maximum load 300kg.f, a static load 0, 100, 200, 300kg.f, As the experimental results, in mode of static load, while the load value increases, the crack growth rate is slower as the energy of a crack mixing grows. Mode I and the power mode II get an influence each other in the direction of crack propagation path, but as they eventually get closer to the breaking point of the crack growth, it is dominated by the mode I.

• Journal of Korea Multimedia Society
• /
• v.8 no.12
• /
• pp.1638-1648
• /
• 2005

The SEM approach to PKl offers several advantages, such as immediate revocation of users' signing ability without CRLs and compatibility with the standard RSA. However, it has a weakness against denial of service attack caused by breaking down or being compromised. G. Vanrenen et al. proposed a distributed SEM approach to overcome the weaknesses. However, it does not provide the desirable properties such as instant availability and immunity against denial of service attack, due to inadequate usage of threshold cryptography and proactive secret sharing. In this paper, we point out its structural contradictions and propose a modified version of distributed SEM approach.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.8-14
• /
• 2009

Characteristics of biodegradable polymers for mulching mat for seedling were investigated. The solvent solubility of polymers is highest in methylene chloride and chloroform. Tensile strength and breaking elongation of polymer dipped paper were increased to the 0.43-1.46 kN/m and the 0.03-0.26%, respectively. PLAs had showed lower glass transition temperature and melting point than those of polyester. As a result, PLA should be most suitable polymer for mulching mat manufacturing. After biodegradation of polymers by lipase, surface of polymers was change to more flat due to enzymatic degradation.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1754-1758
• /
• 2014

The nucleophilic substitution reactions of bis(Y-aryl) chlorothiophosphates (1) with X-pyridines are investigated kinetically in acetonitrile at $35.0^{\circ}C$. The free energy relationships with both X and Y are biphasic concave upwards with a break point at X = 3-Ph and Y = H, respectively. The sign of cross-interaction constants (CICs; ${\rho}_{XY}$) is positive with all X and Y. Proposed mechanism is a stepwise process with a rate-limiting leaving group departure from the intermediate with all X and Y. The kinetic results of 1 are compared with those of Y-aryl phenyl chlorothiophosphates (2). In the case of Y = electron-withdrawing groups, the cross-interaction between Y and Y, due to additional substituent Y, is significant enough to change the sign of ${\rho}_{XY}$ from negative with 2 to positive with 1, indicative of the change of mechanism from a rate-limiting bond formation to bond breaking.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.86.2-86
• /
• 2001

The method of pinpointing the place of the abnormalities of a power transmission system analyzes the voltage and the current information from the both ends of a power [1-2]. Now, there are only current and a voltage measuring instrument every about 20km, and the present condition is specifying the breaking down point by viewing of a worker in it. In this research, a power line circuit is assumed to be a line type system, and M-sequence is impressed to the end, it receives at other ends, the crosscorrelation function of input and output is taken, an impulse response is calculated, and the method in comparison with the time of normal is proposed. By this technique ...

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1144-1148
• /
• 2007

Seoul Metro is celebrating 32 anniversary this year and through developments over the years it is being evaluated as the 3rd in the world in operational sizes, the 4th in the world in facility sizes, it transports about 4 million passengers per day and it is now a vital public transportation means. However, the track maintenance organization and manpower structures along with technology cooperative office were led by unions that do not like changes and overshadows the trends of changes by expanding organizations and recruiting personnels and it is going against the current of times. Thus, it is time when a break point is required for breaking away from labor-intensive methods of the past that rely on hand works and vertical organizational structures. Therefore, this study investigates the states of national.international track maintenance operations and examines and analyzes the problems so that it can be utilized as base data for efficiently operating the organizations and maintenance works on track fields.

• The Research Journal of the Costume Culture
• /
• v.11 no.4
• /
• pp.551-561
• /
• 2003

The regulations for costume were set to improve people's moral fiber and cultural standards. In the 17th and 18th century, the main aim of this regulation was to prohibit luxury. But being the turning point to a modem state, with breaking social status and development of commerce, industry, and the mind of imitation, regulation for luxury wasn't enforced, but rather it brought many revolutionary changes in costume. Restraining human impulse to express beauty was no longer subject to regulation. Therefore, people started to recognize the human figure with shorter Jegory(저고리) and strengthened ceremonial capacity by broadening po's(포) sleeves. The silk fabrics were the most popular fabric during this era, special patterns were added for decoration and also for blessings. Complementary colors were used for contrast on the collar (깃), cuffs (끝동), Gyotrnagi (곁마기), and sash (고름). This color composition gave a younger and more active look. And with red stripes on the sleeves, it emphasized the beauty of the color arrangements as well as providing protection from the devil.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.85-87
• /
• 1994

Feeding biological cells one by one is the key point in the manipulation of cells. The conventional valve systems have many difficulties in feeding cells one by one, because they shut the whole flow of fluids when they are closed and have possibilities of breaking the fragile cells. They need some other equipments for continuous supply of suspension and to protect the cells. We design a check valve for feeding biological cells one by one using polyimide all the silicon substrate. The cells are fed by hydraulic pressure through the isotropically etched cavity. When the suspension flows continuously along the channel the valve is bent by hydraulic pressure and a cell is fed to the outlet. We have studied a cell fusion device fabricated with polyimide and electroplating. If the designed check valve is located in front of the cell fusion device it is helpful to fuse two different kinds of cells.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.1-5
• /
• 2002

In the past, ports have been mainly developed in natural harbors but nowadays ports are built wherever they can be economically justified. Therefore, construction of breakwater in area that establishment of structure is disadvantageous is risen according to the change of conditions to the location for ports. In case of building gravity breakwater in such point, need that plane shapes of more reasonable section permitting wave overtopping is necessary. One of the earliest methods for solving unsteady incompressible flow including free surfaces is the MAC(Marker And Cell) method by Harlow and Welch (1965). Recently. VOF(Volume Of Fluid) method to improve several drawbacks of MAC method is suggested by Hirt and Nichols(1981) and utilized extensively in fields of hydrodynamics. Wave overtopping phenomenon is simulated including wave breaking for permeable breakwater by numerical analysis and investigated features of wave overtopping behind structure using VOF method.