• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.25-33
• /
• 2011

Workers in logistics centers also are exposed to serious musculoskeletal disorders the same as workers in general manufacturing due to operating forklifts and other labor duties. The frequency of these work related injuries decreases, workers' job satisfaction In addition, it causes many employees questioning a job change, which is regarded as the primary factor which drops the productivity. In this paper, we conducted a survey ti perceive the correlation between work related injuries in the fields of distribution centers and job satisfaction. Furthermore we made statistical analysis with our findings. The results of our analysis showed that the frequency of work related injuries due to workers' repetitive loading and unloading work is the primary factor which lowers job satisfaction. In order to improve aforementioned problem we propose first of all loading and unloading on pallet basis, second of all automation and computerization of logistics systems, and third of all ensurinf sufficient break time.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.201-209
• /
• 2016

In wireless sensor networks (WSNs) duty cycling has been an imperative choice to reduce idle listening but it introduces sleep delay. Thus, the conventional WSN medium access control protocols are bound by the energy-latency tradeoff. To break through the tradeoff, we propose a radio wave sensor called radio frequency (RF) wakeup sensor that is dedicated to sense the presence of a RF signal. The distinctive feature of our design is that the RF wakeup sensor can provide the same sensitivity but with two orders of magnitude less energy than the underlying RF module. With RF wakeup sensor a sensor node no longer requires duty cycling. Instead, it can maintain a sleep state until its RF wakeup sensor detects a communication signal. According to our analysis, the response time of the RF wakeup sensor is much shorter than the minimum transmission time of a typical communication module. Therefore, we apply duty cycling to the RF wakeup sensor to further reduce the energy consumption without performance degradation. We evaluate the circuital characteristics of our RF wakeup sensor design by using Advanced Design System 2009 simulator. The results show that RF wakeup sensor allows a sensor node to completely turn off their communication module by performing the around-the-clock carrier sensing while it consumes only 0.07% energy of an idle communication module.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.392-393
• /
• 2007

In this paper, we report the characteristics inorganic EL device with high dielectric constant materials of PMN, PZT. Fabricated EL device shows stable light emission even at 20kHz -400Volt without any break down failure. Brightness voltage curve of EL device is same with typical EL. As increasing applied voltage, the brightness increased linearly. From the results of Frequency and duty ratio variation, over 50% of brightness increment was seen. Luminous efficiency was increased upto 200V range and saturated over 200V by slow increasement of light emission. We got e bright stable emission of 1733 cd/m2 at the condition of Frequency 35 KHz, Duty 10%, 400V.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.64-70
• /
• 1998

Diffraction tomography (DT) is a quantitative technique for high resolution subsurface imaging. In general DT algorithm is used for crosswell imaging. In this study high resolution GPR DT algorithm which is able to reconstruct high resolution image of subsurface structures in multi-monostatic geometry is developed. Developed algorithm is applied to finite difference data and its criteria of application and its limit are studied. Inversion parameters (number of imaging frequency, regularization factor, frequency range) are deduced from isolated weak scattering model. And the usuability of the algorithm is proved by applying to models which break the weak scattering approximation.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.4
• /
• pp.9-17
• /
• 2018

PURPOSE: This study was conducted to compare the effects of the Graston-based massage method and microcurrent application on muscle fatigue after causing muscle fatigue of the quadriceps femoris by applying high-intensity exercise. METHODS: Study subjects (56 healthy subjects in their 20s) were randomized into a microcurrent group (MG), Graston group (GG), and control group (CG). To induce fatigue of the quadriceps femoris, the subjects performed squats 100 times without a break within about 5 minutes. Muscle fatigue was measured immediately after performing squats and 15 minutes after intervention. To measure muscle fatigue, surface electromyogram (EMG) was used to obtain and compare the median frequency. Microcurrent or Graston massage was applied to their quadriceps muscles 15 minutes after performing the squats. RESULTS: Muscle fatigue increased significantly in the vastus lateralis before and after intervention in the Graston group (p<.05), while no significant difference was observed in the rectus femoris and vastus medialis (p>.05). There were also no significant differences in the microcurrent group or the control group. CONCLUSION: Both the microcurrent group and Graston group showed a tendency for increasing median frequency values compared to the control group, but there was no significant difference except in the vastus lateralis treated with the Graston technique. Although there was no significant difference, the Graston technique could be utilized to reduce the occurrence of DOMS by preventing muscle fatigue in clinical practice or sports medicine.

• Korea-Australia Rheology Journal
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2005

Acrylonitrile-Butadiene-Styrene (ABS), polycarbonate (PC) and their alloys are an important class of engineering thermoplastics that are widely used for automotive industry, computer and equipment housings. For the process of recycling mixtures of ABS and PC, it is desirable to know how sensitive the blend properties are to changes in compositions. It was for this reason that blends of virgin ABS and virgin PC at five different compositions, namely, $15\%,\;30\%,\;50\%,\;70%$ and $85\%$ by weight of ABS were prepared and characterised by rheological and mechanical measurements. Rheological properties of these blends in steady, oscillatory and transient step shear and mechanical properties, namely, tensile strength, elongation-at-break and Izod impact strength are reported. The results show that PC behaves in a relatively Newtonian manner, but ABS exhibits significant shear thinning. The ABS-rich blends show a trend that is similar to that of ABS, while PC-rich blends, namely $0\%$ and $15\%$, exhibit a nearly Newtonian behaviour. However, at a fixed shear rate or frequency, the steady shear or the dynamic viscosity varied respectively in a non-mono-tonic manner with composition. Except for $15\%$ blend, the viscosities of other blends fall into a narrow band indicating a wide-operation window of varying blend ratio. The blends exhibited a lower viscosity than either of the two pure components. The other noticeable feature was that the blends at $70\%$ and $85\%$ ABS content had a higher G' than pure ABS, indicating an enhancement of elastic effect. The tensile yield strength of the blends followed the 'rule of mixtures' showing a decreasing value with the increase of ABS content in PC. However, the elongation-at-break and the impact strength did not appear to obey this 'rule of mixtures,' which suggests that morphology of the blends also plays a significant role in determining the properties. Indeed, scanning electron micrographs of the fracture surfaces of the different blends validate this hypothesis, and the $15\%$ blend is seen to have the most distinct morphology and correspondingly different behaviour and properties.

• Journal of Preventive Medicine and Public Health
• /
• v.51 no.5
• /
• pp.234-241
• /
• 2018

Objectives: To determine the relationships between physical activity (PA), the neighborhood environment support for PA, and social support for PA among Mexican-American women living in South Texas. The Enlace study was a randomized controlled trial that tested the effectiveness of a promotora-led PA intervention among low-income Mexican origin women (n=614) living in colonias. Methods: The dependent measures included accelerometer-measured average moderate to vigorous physical activity (MVPA) and sedentary breaks and the Community Health Activities Model Program for Seniors PA 41-item questionnaire. The independent measures included the Physical Activity and Neighborhood Environment Scale (PANES) and the 13-item Physical Activity Social Support (PASS) scale. Results: Enlace participants were on average 40.4 (standard deviation, 10.3) years old, born in Mexico (86.1%), and uninsured (83.1%). Adjusted linear regression results indicated that each 1-point increment in the PANES overall score was associated with 0.050 (p<0.001) unit increase in sedentary break and a -0.043 (p=0.001) unit decrease in sedentary break duration. Both PANES (${\beta}=0.296$; p=0.002) and PASS scores (${\beta}=0.076$; p<0.001) were associated with weekly average self-reported MVPA. Interaction effects were observed between PASS scores and accelerometer-measured frequency of sedentary breaks and sedentary time duration. Conclusions: The findings of this study indicate that the relationships between PA and built environment and social support are measure-dependent and suggest that reducing sedentary time in this population may require a closer assessment of social support for PA.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.515-526
• /
• 2021

The frequency of typhoons and torrential rainfalls has increased due to climate change, and the concurrent risk of breakage of dams and reservoirs has increased due to structural aging. To cope with the risk of dam breakage, a more accurate emergency action plan (EAP) must be established, and more advanced technology must be developed for the prediction of flooding. Hence, the present study proposes a method for establishing a more effective EAP by performing flood and inundation analyses using one- and two-dimensional models. The probable maximum flood (PMF) under the condition of probable maximum precipitation (PMP) was calculated for the target area, namely the Gyeong-cheon reservoir watershed. The breakage scenario of the Gyeong-cheon reservoir was then built up, and breakage simulations were conducted using the dam-break flood forecasting (DAMBRK) model. The results of the outflow analysis at the main locations were used as the basis for the one-dimensional (1D) and two-dimensional (2D) flood inundation analyses using the watershed modeling system (WMS) and the FLUvial Modeling ENgine (FLUMEN), respectively. The maximum inundation area between the Daehari-cheon confluence and the Naeseong-cheon location was compared for each model. The 1D flood inundation analysis gave an area of 21.3 km², and the 2D flood inundation analysis gave an area of 21.9 km². Although these results indicate an insignificant difference of 0.6 km² in the inundation area between the two models, it should be noted that one of the main locations (namely, the Yonggung-myeon Administrative and Welfare Center) was not inundated in the 1D (WMS) model but inundated in the 2D (FLUMEN) model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.5
• /
• pp.626-634
• /
• 2018

These days, widespread use of sensitive loads and distributed generators makes static transfer switch (STS) an essential component in power circuits to achieve a good power quality for AC Grids. In case of a short-circuit fault, previous STS cannot break the fault current. However, the proposed STS has the capability of breaking it quickly as a circuit breaker. Also if there are power quality problems such as Sag/Swell, the proposed STS can quickly transfers the load to the good quality source. Furthermore it is proved that the transfer time of the proposed STS is within one half of period of 3-phase source frequency regardless of the type of load. It is anticipated that the proposed STS may be utilized to realize many stable and reliable AC grid systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.652-657
• /
• 2002

It is addressed that the turbulent broadband sound power from a sirocco fan can be modeled by the trailing edge noise. The trailing edge noise is usually influenced by inflow turbulence, separation and boundary layer on the blade. The design parameters such as solidity(c/s) and stagger angle are specified to predict performance and noise level because the separation and slip velocity are strongly affected by them along with the flow coefficient. This paper reports the effects of the stagger angle upon the trailing edge noise for various trailing edge shapes. It is believed that the serrated trailing edge provides break-up mechanism for organized convecting vortices, thereby reduce the overall noise level.