• Title/Summary/Keyword: branch degree

Search Result 191, Processing Time 0.026 seconds

Effect of Branch Degree of Cationic Acrylamide Copolymers on Flocculation Properties

  • Son, Dong-Jin;Kim, Bong-Yong
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.44 no.2
    • /
    • pp.8-17
    • /
    • 2012
  • Three kinds of cationic acrylamide copolymer with different branch degree were prepared controlling the dosage of N, N'-methylenebisacrylamide. The physical characteristics of the branch-degree-modified copolymers were analyzed by intrinsic viscosity and charge density. The branch degree measurements were investigated by applying the colloidal titration phenomena using a spectrophotometer and comparison with the cationic regain measurement method. The results showed that the absorbance behaviors of spectrophotometer were distinctively different with the branch degree of copolymers. Also, the branch degree determinations and molecular structure estimations of the copolymers were numerically measured by applying the titration phenomena using a spectrophotometer. Finally, three kinds of branch-degree-modified copolymers were applied to flocculation test using arbocel micro pulp for the determination of flocculation behavior by different morphology of cationic acrylamide copolymers.

A Study of Types and Forms of Branch-road in Traditional Korean Villages (한국전통마을에 있어서 갈림길의 유형과 형태에 관한 연구)

    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.27 no.1
    • /
    • pp.101-109
    • /
    • 1999
  • The purpose of this study is to analyse types and forms of branch-road in traditional korean villages. To do this, this study has selected and measured 87 branch-road cases of five traditional villages. An analysis of the case study has revealed the following results : 1. Branch-roads have four formations : 3 way, 4 way, multi-way and others. 2. Branch-roads comprise 64 percent of 3 way, 18 percent of 4 way, 8 percent of multi-way and 9 percent of others, respectively. 3. Topographic conditions have mostly affected the formation of branch-roads. 3 way of branch - roads are easily found in flat village. 4 way are multi-way of branch-road are found in semi-hilly and hilly village 4. 3 way of branch-roads have three types: T-type, Y-type, and y-type. 5. T-types are easily found in flat village, but Y-type and y-type are found in semi-hilly and hilly village. 6. Each angle of T-type is 171,99,90, respectively. It has turned out 8 degree is slightly deviated form the square. 7. Y-type of branch-road has an asymmetric form, comprising 145, 128, 87 degree of the angle, compared to 150, 150, 60 degree of symmetric one. 8. Average angles of y-type that are mostly found in hilly village are 175, 113, 72. Angle differences from each spot are 62 and 41 degree. It is assumed that 39 degree is a slope of least effort to walk. 9. 4 way of branch-roads have not only "+" type but various types of K, Y and Y, Y and y, T and y and a foot of bird. 10. It is assumed that multi-way of branch-roads, mostly found on the middle and bottom of the hilly slope, has naturally formed to connect up and down, left and right.and right.

  • PDF

Effects of Branch Degree of CPAM for Retention and Drainage

  • Son, Dong-Jin;Kim, Bong-Yong
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2007.11a
    • /
    • pp.21-33
    • /
    • 2007
  • CPAM has been applied to the paper industry for the purpose of wet-end improvement for a long time. And molecular weight and charge density have been managed most important quality factors to make CPAM for this application. Recently branched CPAM was developed to improve retention and drainage characteristics and we considered branch degree of CPAM as important factor as molecular weight and charge density. In this experiment, we tried to investigate physical and chemical properties to determine branch degree and flocculation efficiency using Arbocell pulp which was recently developed micro size pulp and finally we applied retention and drainage test under the ONP stock condition.

  • PDF

BOUNDS ON THE HYPER-ZAGREB INDEX

  • FALAHATI-NEZHAD, FARZANEH;AZARI, MAHDIEH
    • Journal of applied mathematics & informatics
    • /
    • v.34 no.3_4
    • /
    • pp.319-330
    • /
    • 2016
  • The hyper-Zagreb index HM(G) of a simple graph G is defined as the sum of the terms (du+dv)2 over all edges uv of G, where du denotes the degree of the vertex u of G. In this paper, we present several upper and lower bounds on the hyper-Zagreb index in terms of some molecular structural parameters and relate this index to various well-known molecular descriptors.

Nonlinear vibration of multi-body systems with linear and nonlinear springs

  • Bayat, Mahmoud;Pakar, Iman;Bayat, Mahdi
    • Steel and Composite Structures
    • /
    • v.25 no.4
    • /
    • pp.497-503
    • /
    • 2017
  • In this paper, nonlinear vibration of multi-degree of freedom systems are studied. It has been tried to develop the mathematical model of systems by second-order nonlinear partial differential equations. The masses are connected with linear and nonlinear springs in series. A great effort has been done to solve the nonlinear governing equations analytically. A new analytical method called Variational Iteration Method (VIM) is proposed and successfully applied to the problem. The linear and nonlinear frequencies are obtained and the results are compared with numerical solutions. The first order of Variational Iteration Method (VIM) leads us to high accurate solution.

Copper binding capacity and physicochemical properties of pectins with different degrees of esterification. Approach to standardization of pectin preparations

  • Kovalev, Valeri V;Khotimchenko, Maxim Y;Khotimchenko, Yuri S
    • Advances in Traditional Medicine
    • /
    • v.7 no.2
    • /
    • pp.171-181
    • /
    • 2007
  • Metal binding activity of the pectin samples with different physicochemical properties was studied. It was found that in vitro copper binding capacity of pectins is depending on the following factors: degree of esterification, content of non-methylated anhydrogalacturonic acid, and pH of solution. There was found that the maximum copper uptake capacity increases correspondingly to reduction of the degree of esterification of pectin, rise of the non-methylated anhydrogalacturnic acid content and the solution pH. It is proposed to use for standardization of pectin samples such parameters as the degree of esterification, content of anhydrogalacturonic acid, and intrinsic viscosity.

The Effect on the Forest by the Air Pollution around Ulsan Industrial Complex(I) -Injury on Black Pine- (울산공단 지역에서의 대기오염이 삼림에 미치는 영향 (I) -대기오염에 의한 곰솔피해-)

  • 이경재;배정오;고강석;우종서
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.6 no.1
    • /
    • pp.103-110
    • /
    • 1990
  • To investigate the damage on the black pine(Pinus thunbergii) by the air pollution around Ulsan Industrial Complex, forty-six plots were set up and the effects of air pollution were evaluated with the injured index of black pine. The injured index of black pine showing the degree of air pollution from 1987 to 1988 indicated that the central area of Yeochun-dong and Youngjam-dong were heavily damaged. The effective indicaters of black pine damage from air pollution in the order of importance were the color change of one-year-old branch, the ratio of fallen needle of two-year-old branch, the degree of reducing needle, and the degree of growing shoot growth. There was a reliable relationship between the content of $SO_3$ and F in the air and the injured index of black pine. There was no significant correlation between the injured index of the black pine and the content of chemical properties in soil.

  • PDF

The Filling Imbalance in Multi-Cavity Injection Molds with Unary Branch Type Runner Lay-out (편측 분기형 러너 배열을 가진 다수 캐비티 사출금형에서의 충전 불균형도)

  • 강철민;정영득
    • Transactions of Materials Processing
    • /
    • v.13 no.7
    • /
    • pp.580-585
    • /
    • 2004
  • Almost all injection molds have multi-cavity runner system fur productivity and are designed with geometrically balanced runner system in order to minimize filling imbalance between cavity to cavity during processing. However, filling imbalances have been observed though geometrically balanced runner lay-out. Generally, these filling imbalances are due to thermal unbalance, viscosity, characteristic of polymers and so on. These kinds of filling imbalances have already been reported by Beaumont since 1997, but his research has mainly focused on filling imbalance at binary runner. In this study, we conducted an experimental study about the filling imbalances in unary branch runner as well as binary branch runner and inquired into the causes of filling imbalances. The results could be summarized as fellowing: Filling imbalances existed in multi-cavity mold with unary branch runner, it could be decreased by optimizing processing condition such as increasing injection rate, and it is almost proportion to each polymer's temperature sensibility.

Synthesis of CuO/ZnO Nanoparticles and Their Application for Photocatalytic Degradation of Lidocaine HCl by the Trial-and-error and Taguchi Methods

  • Giahi, M.;Badalpoor, N.;Habibi, S.;Taghavi, H.
    • Bulletin of the Korean Chemical Society
    • /
    • v.34 no.7
    • /
    • pp.2176-2182
    • /
    • 2013
  • A novel sol-gel method was implied to prepare CuO-doped ZnO nanoparticles. XRD and SEM techniques were used to characterize the CuO-doped ZnO sample. The photocatalytic degradation of Lidocaine HCl was investigated by two methods. The degradation was studied under different conditions such as the amount of photocatalyst, pH of the system, initial concentration, presence of electron acceptor, and presence of anions. The results showed that they strongly affected the photocatalytic degradation of Lidocaine HCl. The photodegradation efficiency of drug increased with the increase of the irradiation time. After 6 h irradiation with 400-W mercury lamp, about 93% removal of Lidocaine HCl was achieved. The degree of photodegradation obtained by Taguchi method compatible with the trial-and-error method showed reliable results.

The Analytic Performance Model of the Superscalar Processor Using Multiple Branch Prediction (독립시행의 정리를 이용하는 수퍼스칼라 프로세서의 다중 분기 예측 성능 모델)

  • 이종복
    • Proceedings of the IEEK Conference
    • /
    • 1999.06a
    • /
    • pp.1009-1012
    • /
    • 1999
  • An analytical performance model that can predict the performance of a superscalar processor employing multiple branch prediction is introduced. The model is based on the conditional independence probability and the basic block size of instructions, with the degree of multiple branch prediction, the fetch rate, and the window size of a superscalar architecture. Trace driven simulation is performed for the subset of SPEC integer benchmarks, and the measured IPCs are compared with the results derived from the model. As the result, our analytic model could predict the performance of the superscalar processor using multiple branch prediction within 6.6 percent on the average.

  • PDF