• 대한치과교정학회지
• /
• 제43권4호
• /
• pp.186-192
• /
• 2013

Objective: To analyze the fatigue resistance, debonding force, and failure type of fiber-reinforced composite, polyethylene ribbon-reinforced, and braided stainless steel wire lingual retainers in vitro. Methods: Roots of human mandibular central incisors were covered with silicone, mimicking the periodontal ligament, and embedded in polymethylmethacrylate. The specimens (N = 50), with two teeth each, were randomly divided into five groups (n = 10/group) according to the retainer materials: (1) Interlig (E-glass), (2) everStick Ortho (E-glass), (3) DentaPreg Splint (S2-glass), (4) Ribbond (polyethylene), and (5) Quad Cat wire (stainless steel). After the recommended adhesive procedures, the retainers were bonded to the teeth by using flowable composite resin (Tetric Flow). The teeth were subjected to 10,00,000 cyclic loads (8 Hz, 3 - 100 N, $45^{\circ}$ angle, under $37{\pm}3^{\circ}C$ water) at their incisoproximal contact, and debonding forces were measured with a universal testing machine (1 mm/min crosshead speed). Failure sites were examined under a stereomicroscope (${\times}40$ magnification). Data were analyzed by one-way analysis of variance. Results: All the specimens survived the cyclic loading. Their mean debonding forces were not significantly different (p > 0.05). The DentaPreg Splint group (80%) showed the highest incidence of complete adhesive debonding, followed by the Interlig group (60%). The everStick Ortho group (80%) presented predominantly partial adhesive debonding. The Quad Cat wire group (50%) presented overlying composite detachment. Conclusions: Cyclic loading did not cause debonding. The retainers presented similar debonding forces but different failure types. Braided stainless steel wire retainers presented the most repairable failure type.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.939-941
• /
• 2017

항공우주 구조물은 경량화를 위하여 복합재의 사용이 증가하고 있다. 이러한 구조물 중 추진기관에 해당하는 발사체 동체의 링 프레임 및 부품은 구조적 파손에 덜 취약한 섬유 강화 복합재를 주로 사용한다. 섬유 강화 복합재의 사용이 증가함에 따라 강성 및 강도의 효율적인 설계 방법에 대한 관심이 높아지고 있다. 본 논문에서는 섬유 강화 복합재 중 2차원 3축 브레이딩 복합재의 단위 체적 형상(Repeating Unit Cell, RUC)에 따른 기계적 강도를 예측하였다. 강도 예측 기법으로 섬유다발의 이산화 기법를 통한 섬유조각(Yarn Slice) 정의, 증분 접근법, 강성저하 모델 등을 사용하였다. 마지막으로 예측된 강도와 시험결과를 비교하여 본 논문에서 정의한 예측 기법의 정확도를 검증하였다.

• 한국수자원학회논문집
• /
• 제47권1호
• /
• pp.37-47
• /
• 2014

본 연구에서는 하폭의 주기적인 변화에 의하여 교호사주와 복렬사주가 발생하는 수리학적 조건에서 주기적인 하폭변화에 의한 강제사주의 형성과정과 거동 특성을 2차원 수치모형을 이용하여 파악하였다. 하폭변화의 진폭이 크면, 사주의 파장은 짧아지고, 사주의 이동성은 크게 감소하였다. 교호사주가 발생할 수 있는 영역에서는 하폭의 변화에 대하여 강제효과가 크게 작용하며, 복렬사주가 발생할 영역에서는 하폭의 변화에 의한 강제효과가 상대적으로 작은 특성을 보여주었다. 복렬사주가 발달한 조건에서는 하도변화의 진폭 대 평균하폭의 비인 무차원 진폭이 0.25로 증가할 때 사주의 이동속도는 증가하지만, 이보다 크면 사주의 이동속도가 급격하게 감소하였다. 교호사주가 발생하는 조건에서는 사주의 파장 대하폭 변화의 파장 비인 무차원 사주의 파장이 증가할수록 사주의 이동속도가 증가하지만, 무차원 사주의 파장이 1에 가까운 경우에 사주의 이동속도가 급격하게 감소하였다. 즉, 사주의 파장과 하폭의 파장이 일치할 때, 하폭변화에 의한 강제효과가 강하게 작용하여 사주가 압박되기 때문이다.

• 대한가정학회지
• /
• 제44권4호
• /
• pp.39-47
• /
• 2006

This study considers the Gagye(Added Hair) style shown in ancient Goguryeo Murals and examines its values and significance through an in-depth study on the relevance to the style of China. In Gagye style, the Korean Hwan-gye(Round-rolled Hair) hair type was different from that of China in letting the hair down and using accessories. The Korean Sseu-gye(Covered Hair) hair type features textile-made and Bokbal (Covered hair) styles. The Korean Go-gye(Highly-rolled up Hair) hair type was different from that of China in style and volume. The Korean Da-gye(Multi-laid Hair) hair type was different from that of China in component pattern in that the Korean Da-gye type was composed of two or three gyes. Eoneun meori (Braided & Coiled Hair) features the unique Goguryeo pattern in which "Che" was placed on the head and the hair was braided down on the sides of the face. Therefore, the Gagye style of Goguryeo Murals was localized and developed through cultural interchange between Goguryeo and China. It also features its own values and significance in Korea's clothing history.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.87-90
• /
• 2003

In Resin transfer molding (RTM), composite parts are produced by impregnation of a dry reinforcement with liquid matrix resin. Permeability is a key issue in this process. For thin parts, the resin flow in the thickness direction can be neglected. Therefore thin parts are considered as two-dimensional composites. However the resin flow through the thickness is important to thicker parts and we have to consider out-of-plane permeability. This work discusses a method to measure out-of-plane permeability. The flow rate and pressure drop across the porous media were measured. Also one dimensional form of Darcy's law is applied to calculate the out-of-plane permeability of various preforms. The flow is injected uniformly into layers of the preform. And a circular fiber mat with 6cm diameter was cut and flattened from cylindrical mandrel.

• 한국염색가공학회지
• /
• 제30권1호
• /
• pp.38-50
• /
• 2018

This investigation reported the recent development of 3 dimensional fabrics such as spacer fabric, 3 dimensional multi-layered fabric and 3 dimensional braided fabric. First, we categorized 3 dimensional fabrics into 3 main products; 3 dimensional woven fabrics, 3 dimensional knitted fabrics and 3 dimensional braided fabrics with reviewing the possible main applications. We also reported the research and development trends of 3 dimensional fabrics by analyzing technical trends in industry and research institutes at domestic and overseas. United State, Germany and Japan lead the manufacturing technology for the mainly preform related products to apply in aerospace, automotive, protections, architecture and clothing applications. Lastly, we reviewed the main products of the leading company which manufactured using the 3 dimensional fabrics.

• 자원환경지질
• /
• 제31권5호
• /
• pp.431-446
• /
• 1998

The calcretes from the Cretaceous Gyeongsang Supergroup in the vicinity of Ulsan city have been examined at five sites (Daedong, Seodong, Ansachon, Deogha, and Mangyangri). In these calcretes, evidences indicating pedogenic origin are recognized. Included are calcite aureoles around detrital grains, pedotubular pores, microstromatactis, circumgranular cracks, fitted structure of adjacent peloids, calcrete ooids, rhizocretions, and calcrete intraclasts. On the basis of calcrete development together with lithofacies, the depositional environments of those deposits are interpreted as lake margin (Daedong deposits), braided to low-sinuosity river (Seodong deposits), braid plain (Ansachon deposits), and meandering river (Deogha and Mangyangri). Stratigraphically, the fluvial deposits of study area show paleoenvironmental change from braided to low-sinuosity river plain under arid climatic condition to meandering river plain under seasonally wet an dry climatic condition. The stratigraphic successions of the Gyeongsang Supergroup of the study area Qacustrine-fluvial-Iacustrine) together with paleoenvironmental change of fluvial deposits suggest that those deposits can be correlated with the Banyaweol-Songnaedong-Geoncheonri formations of the Gyeongsang Supergroup in the western part of the Yangsan Fault.

• Clinics in Shoulder and Elbow
• /
• 제22권3호
• /
• pp.146-148
• /
• 2019

We report a simple technique for repairing capsular tear, using only a hook-like, cannulated instrument and braided sutures without relaying steps. A No. 2 braided suture is passed through the lumen of the instrument. Under direct arthroscopic view, the tip of the instrument is passed through the side of the capsule that has previously been separated with the probe. One end of the suture is retrieved with a grasper through a separate portal. The tip is moved back without withdrawing through the skin, and reinserted into the other side of the capsule. Holding the end retrieved earlier, the other end of the suture is retrieved with a suture retriever. After complete removal of the instrument, the suture is tied through a cannula using the standard knot tying techniques. The same procedures are repeated for other required knots.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.107-110
• /
• 2003

본 연구에서는 3차원 브레이딩 기계를 이용하여 제작된 6 layer의 3차원 원형 형태로 브레이드된 유리 섬유 강화 복합재료의 프리프레그를 이용하여 에폭시 수지를 모체로 하는 RTM(Resin Transfer Molding) 공정을 통해 직교 이방성 복합재료를 제작하였다. 또한 탄성한계 내에서의 구성방정식을 얻기 위해 unit cell 모델링을 통해 복합재료의 기하를 모사하고 method of cells 이론과 homogenization technique를 이용하여 복합재료의 구성방정식을 나타내는 수치해석 코드를 개발하였다. (중략)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.315-316
• /
• 2007