• Journal of Food Hygiene and Safety
• /
• v.18 no.4
• /
• pp.202-210
• /
• 2003

This study aims at making a HACCP(Hazard Analysis Critical Control Point)plan to be applied to soybean curd and verifing its effectiveness. First, we develped a general model of HACCP according to the guidelines of Codex (FAO/WHO). And we applied the model to 4 soybean curd workshops for 3 months. The HACCP model is composed of these procedures; HACCP team organization, production description, work flow chart, hazatd analysis, CCP (critical control point) decision, CL (critical limit) establishment, monitoring method decision, correction, verification and documentation. CCP were selection procedure and refrigeration procedure in non-wrapped soybean curd. CCP were selection procedure, heat-sterilizing and refrigeration in wrapped soybean curd. The result of bacterial experiment after apling the model for 3 months, the bacterial numbers of soybean curd box, wrapper, and soybean curd production were lower after appling than before appling, the model. We could verify that the appications of the HACCP model were effective to the soybean curd workshops.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.654-659
• /
• 2016

Recently, the passenger ship 'Sewol' capsized with an abrupt inclination while she was making a small angle alteration. It is very important to fully understand the concepts, causes and relevant corrections for a ship's transverse inclination, which is classified into heel, list and loll. In this study, the concept, development and calculation of loll were well considered and the actual magnitude of the angle of loll was simulated in a box-shaped model-ship experiment. The experimental values and its development according to different values of negative stability were compared with calculated values. In the results, experimental values for the angle of loll coincided closely with calculated values and the model inclined symmetrically on both port and starboard sides indicating an outstanding feature of loll. This study is expected to expand the concept of loll and help in the analysis of capsize incidents with unknown causes. Further experimental research or case studies concerning the risk of inappropriate correction for loll arising from misunderstandings will be needed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.11
• /
• pp.1649-1656
• /
• 2015

Gene expression profiling has offered new insights into postmortem molecular changes associated with meat quality. To acquire reliable transcript quantification, high quality RNA is required. The objective of this study was to analyze integrity of RNA isolated from chicken skeletal muscle (pectoralis major) and its capability of serving as the template in quantitative real-time polymerase chain reaction (qPCR) as a function of postmortem intervals representing the end-points of evisceration, carcass chilling and aging stages in chicken abattoirs. Chicken breast muscle was dissected from the carcasses (n = 6) immediately after evisceration, and one-third of each sample was instantly snap-frozen and labeled as 20 min postmortem. The remaining muscle was stored on ice until the next rounds of sample collection (1.5 h and 6 h postmortem). The delayed postmortem duration did not significantly affect $A_{260}/A_{280}$ and $A_{260}/A_{230}$ ($p{\geq}0.05$), suggesting no altered purity of total RNA. Apart from a slight decrease in the 28s:18s ribosomal RNA ratio in 1.5 h samples (p<0.05), the value was not statistically different between 20 min and 6 h samples ($p{\geq}0.05$), indicating intact total RNA up to 6 h. Abundance of reference genes encoding beta-actin (ACTB), glyceraldehyde 3-phosphate dehydrogenase (GAPDH), hypoxanthine-guanine phosphoribosyltransferase (HPRT), peptidylprolylisomerase A (PPIA) and TATA box-binding protein (TBP) as well as meat-quality associated genes (insulin-like growth factor 1 (IGF1), pyruvate dehydrogenase kinase isozyme 4 (PDK4), and peroxisome proliferator-activated receptor delta (PPARD) were investigated using qPCR. Transcript abundances of ACTB, GAPDH, HPRT, and PPIA were significantly different among all postmortem time points (p<0.05). Transcript levels of PDK4 and PPARD were significantly reduced in the 6 h samples (p<0.05). The findings suggest an adverse effect of a prolonged postmortem duration on reliability of transcript quantification in chicken skeletal muscle. For the best RNA quality, chicken skeletal muscle should be immediately collected after evisceration or within 20 min postmortem, and rapidly preserved by deep freezing.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.6
• /
• pp.603-612
• /
• 2006

The study with laboratory sandbox model has been carried out to address potential use of reclaimed water, as a way for artificially recharging the coastal aquifer, to effectively prevent from seawater intrusion. To do this, we assessed hydraulic and geochemical properties depending upon various extraction and recharging conditions. While solely being recharged, the intrusion could be significantly retarded than those of recharge and extraction implied together. At 0.5 to 2 for the ratio of the extraction over the recharge rate, the fresh water was exploited from the tank, where the void regime was simultaneously saturated with the recharged water. In the meantime, the saline water zone was diluted and back-tracked by the recharged water due to forming a hydraulic geochemical barrier around the injection well. However, if the ratio was being increased to greater than 4, saltwater more deeply intruded to the freshwater zone because the artificial recharge was not sufficiently supplied to timely back-fill the void space. When the aquifer water was intermittently extracted at the ratio of $0.5{\sim}2$ over the recharge rate, the value of S.M.I. decreased, but increasing it to more than 4 unlikely escalated the value of S.M.I as much as $3{\sim}47%$ indicating that the salt water intruded. It finally revealed that the proper ratio of extraction/recharge or intermittent extraction would efficiently retracted seawater intrusion while the freshwater sources could be conservatively utilized.

• Journal of Applied Biological Chemistry
• /
• v.55 no.4
• /
• pp.267-272
• /
• 2012

We investigated that electron beam irradiation is the effective method to control the sprouting of sweetpotato roots without changing of food quality characteristics. In 12 and $25^{\circ}C$ storage after electron beam irradiation, all control samples were sprouted from 6 and 4 weeks after storage, respectively. The sprouting rate of control increased with time and the rate reached to 11.2-12.4 and 70.5-74.2% at 8 weeks after 12 and $25^{\circ}C$ storage. Also, the sprouting of middle and below positioning sweetpotato roots at 12 and $25^{\circ}C$ storage after irradiation reached to 8.6-11.3 and 42.7-48.7% after a storage period of 8 weeks, respectively. However, the sprouting of all sweetpotato roots stored at $4^{\circ}C$ and upper (0-7 cm) positioning samples of box stored at 12 and $25^{\circ}C$ with electron beam was completely inhibited due to increase peroxidase and indole acetic acid (IAA) oxidase activity. Also, all samples with electron beam such as hardness, pH, sugar content, weight loss, and vitamin C and dacarotene content did not differ from that of the control. Therefore, if electron beam will be irradiated to sweetpotato roots above 0.1 kGy before packing, it will effectively inhibit their sprouting stored at $25^{\circ}C$ without the change of food quality characteristics.

• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.98-107
• /
• 2016

Purpose: The aim of this study was to find an appropriate polymer film, which could reduce the water condensation for pallet-size modified atmosphere packaging (MAP). Methods: Five different types of films were selected from several commercialized films. Prior to the real food storage test, plastic boxes with wetted plastic balls were used to simulate the high humidity conditions of real food storage. The initial MAP condition was 5% oxygen and 95% nitrogen, and the $O_2$ concentration, the relative humidity and water condensation inside the films were checked on a daily basis. The MAP test for tomatoes was conducted by using the most appropriate film from the five films examined in this study. Results: Every film except Mosspack(R) indicated a similar variation in the $O_2$ concentration over the course of time. The relative humidity near the surfaces of all the films except nylon-6 approached saturation conditions over time. For three kinds of films, namely, low-density polyethylene (LDPE) film, anti-fogging oriented polypropylene (AFOPP) film, and Mosspack(R), the inner surfaces of the films were fully covered with dew after a storage period of a day. Conversely, an area of 4.5% was covered with dew in the case of the poly lactic acid (PLA) film, and there was no dew inside the nylon-6 film. The pallet-size MAP test for tomatoes was conducted by using the nylon-6 film and there was no water condensation inside the nylon-6 film over three weeks of storage. Conclusions: During the pallet scale MAP, water condensation could cause severe fungal infection and wetting of the corrugated box. Hence, it was important to minimize water condensation. This study showed that the MAP films with high WVTR such as nylon-6 and PLA could reduce the water condensation inside the pallet scale MAP.

• Journal of Animal Science and Technology
• /
• v.45 no.2
• /
• pp.169-182
• /
• 2003

To understand the structure and regulation of bovine ADRP (Adipocyte Differentiation Related Protein) gene, we have isolated the genomic clone of bovine ADRP and determined its sequence. A genomic Southern blot analysis confirmed that ADRP gene is present as a single copy in bovine genome and the ADRP gene spans 12 kb. Bovine ADRP genomic clone, HwADRPg-1, had 8 exons and 7 introns, and all splicing sites conformed to the GT/AG rule with the exon-intron boundaries located exactly. Analysis of the upstream 649 bp of the sequence of HwADRPg-1 showed that it does not contain any canonical TATAA boxes; however Sp1 binding sites and CAAT boxes are found. The promoter contained potential binding sites for AP-1, AP-2 and several putative transcription factor binding sites. The 5'-flanking region of HwADRPg-1 contained muscle specific transcription activator Myo G and C/EBP (CCAAT/ enhancer binding protein) recognizing site. These results suppose that the Myo G transcription activator regulate the transcription of bovine ADRP gene in muscular tissue and its transcriptional activity was triggered by degree of muscular development. Our results provide the necessary analysis for other flanking sequences are needed in addition to the proximal cis elements of this promoter to confer adipocyte differentiation-dependent or growth-dependent transcriptional control.

• The Journal of the Korea Contents Association
• /
• v.18 no.8
• /
• pp.536-543
• /
• 2018

In 2003, the local police system was adopted, and the personnel and installation of local police agencies were subsequently changed. According to the "Police Law", local police station shall be established under the control of chief of police department, and the criteria for the installation of local police stations were to take into consideration of population, administrative districts, area, geographical characteristics, traffic and other conditions. The chief of local police has the authority to install district police station according to the "National Police Agency and its Organization". However, it is hard to say they were applied. Futhermore, it is inappropriate to apply the laws and regulations equally across the nation. Also, it has been criticized for its difficulties of patrolling, the weakened relationship with local residents, and poor quality of security services in rural areas. Therefore, this study suggests that the criteria for the installation of the police station should be made through a comprehensive analysis of the characteristics of the areas and security needs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.332-337
• /
• 2017

This study investigates the site and architectural space of Byung-Su Jo's traditional house on Yongyu Island in Incheon. The house is located on a peaceful, warm site that is well protected by surrounding mountains, such as Hyunmubong to the rear, Jwacheongyong to the left, Wubackho to the right, and Ansan in front. The house was designed with an open layout with a sarangchae and anchae. There is a spring on the left side of the sarangchae, and a stream auspiciously flows from the west to the east in front of the sarangmadang. The house generally faces south, but to avoid pressure by the height of Ansan in the south direction, it is slightly turned to the east. There is a wide, rectangular pond that covers the pungsu weak point of the empty open view between the right and left mountains. The sarangchae space is composed of front 6 Gan and side 3 Gan. The anchae space is also composed of front 6 Gan and side 3 Gan,and it has a typical L-shaped anchae layout for the middle region of Korea. There is no shrine in the backyard, where yongmag is descending from hyunmubong, and a jangdokdae is installed to the west direction of the anbang due to narrow and slope backyard space.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.542-550
• /
• 2020

The use of high-strength aluminum alloys for ships and of shore structures has many benefits compared to carbon steels. Recently, high-strength aluminum alloys have been widely used in onshore and of shore industries, and they are widely used for the side shell structures of special-purpose ships. Their use in box girders of bridge structures and in the topside of fixed platforms is also becoming more widespread. Use of aluminum material can reduce fuel consumption by reducing the weight of the composite material through a weight composition ratio of 1/3 compared to carbon steel. The characteristics of the stress strain relationship of an aluminum structure are quite different from those of a steel structure, because of the influence of the welding[process heat affected zone (HAZ). The HAZ of aluminum is much wider than that of steel owing to its higher heat conductivity. In this study, by considering the HAZ generated by metal insert gas (MIG) welding, the buckling and final strength characteristics of an aluminum reinforcing plate against longitudinal compression loads were analyzed. MIG welding reduces both the buckling and ultimate strength, and the energy dissipation rate after initial yielding is high in the range of the HAZ being 15 mm, and then the difference is small when HAZ being 25 mm or more. Therefore, it is important to review and analyze the influence of the HAZ to estimate the structural behavior of the stiffened plate to which the aluminum alloy material is applied.