• Journal of Korean Society of Steel Construction
• /
• v.17 no.2 s.75
• /
• pp.227-241
• /
• 2005

This paper presents a practical and realistic Life-Cycle Cost (LCC) optimum design methodology for steel bridges considering the long-term effect of environmental stressors such as corrosion and heavy truck traffics on bridge reliability. The LCC functions considered in the LCC optimization consist of initial cost, expected life-cycle maintenance cost, and expected life-cycle rehabilitation costs including repair/replacement costs, loss of contents or fatality and injury losses, road user costs, and indirect socio-economic losses. For the assessment of the life-cycle rehabilitation costs, the annual probability of failure, which depends upon the prior and updated load and resistance histories, should be accounted for. For the purpose, Nowak live load model and a modified corrosion propagation model, which takes into consideration corrosion initiation, corrosion rate, and repainting effect, are adopted in this study. The proposed methodology is applied to the LCC optimum design problem of an actual steel box girder bridge with 3 continuous spans (40m+50m+40m=130m). Various sensitivity analyses are performed to investigate the effects of various design parameters and conditions on the LCC-effectiveness. From the numerical investigation, it has been observed that local corrosion environments and the volume of truck traffic significantly influence the LCC-effective optimum design of steel bridges. Thus, these conditions should be considered as crucial parameters for the optimum LCC-effective design.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.6
• /
• pp.671-682
• /
• 2012

The use of sinusoidal corrugated web girder for the box-type girders and gable steel main frames has recently been increasing very much. The reasons are that the thin web of the girder affords a significant weight reduction compared with rolled beam and welded built-up girder, and that corrugation prevents the buckling failure of the web. Improvements of the automatic fabrication process makes mass production of the corrugated web and unit possible, and applications of this girder have been extended considerably. Thus, the research for the optimum design processer considering the production data is needed practically. For doing this research, we develope the discrete optimum structural design program in consideration of production list data for the research, and the program apply to the single girder under the uniform load and the concentrated load as numerical example. We consider objective function as minimum weight of the girder, and use slenderness ratio, stress of flanges and corrugated web, and the girder deflection as the constraint functions. And also the Genetic Algorithms is adopted to search the global minimum point by using the production list as a discrete design variable. Finally, to verify the optimality of the design, we conduct a comparison of the results of the discrete optimum design with those of the continuous one, and also analyze the characteristics of the optimum cross-section.

• The Korean Journal of Soil Zoology
• /
• v.5 no.2
• /
• pp.101-112
• /
• 2000

Spiders usually have poor vision but not the jumping spiders. Their eight eyes are located on its distinctive box-shaped head and relatively well developed. The Spiders were fixated with 3% glutaraldehyde and thin section was performed with ultra-microtome. The specimens were observed with light microscopy, transmission and scanning electron microscopy. Eye area of jumping spider is competed of three rows. The first eye row comprise four eyes. Among them, two anterior median eyes are the largest and two anterior lateral eyes are relatively small. The former are main-eyes and have excellent vision. The second row, which has the two smallest eyes, is located about midway between the first and third rows. The third row is about half-way back on the thorax and eyed of which are middle size. To investigate ultrastructure of salticid spiders'eye, Menemerus fulvus was chosen. All of Menemerus fuvus's eyes are composed of cornea, lens, vitreous body and retina in histologically. Cornea layer, linked to exocuticle of exoskeleton. is regular layer structure without any cell tripe. Lenses are biconvex type. Retinas comprise well developed microvilli-shape rhabdomeres, unpigmented supporting cells, and pigmented cell. Retinas of anterior median eyes are surrounded by circular cylinder-shaped vitreous body, photoreceptor, i.e. rhabdomeres, of it is irregularly arranged compared to the other eyes.

• Microbiology and Biotechnology Letters
• /
• v.28 no.3
• /
• pp.167-171
• /
• 2000

Analysis of Production of Thermostable Alkaline Protease using Thermoactinomyces sp. E79. Jung, Sang Won, Sung-Sik Park, Yong-Cheol Park" Tae Kwang Oh2, and Jin-Ho Seo*, Department of Food Science and Technology, Seoul National University, Suwon 441-744, Korea, 1lnterdisciplinary program [or Biochemical Engineering & Biotechnology, Seoul National Univer5it}~ Seoul 151 "7421 Koreal 2Microbial Enzyme RU, Korea Research Institute of Bioscience & Biotechnology, Po. Box 1151 Yusong, Taejon 305"6001 Korea - This research was undertaken to analyze fermentation properties of Thermoactinomyces sp. E79 for production of a thermostable alkaline protease, which is able to specifically hydrolyze defatted soybean meal (DSM) to amino acids. TIle optimum pH for cell growth and protease production was pH 6.7, Thermoactinomyces sp. E79 did not grow at pHlO Among carbon sources tested, soluble starch was the best for protease production, while glucose repressed protease production. Tryptone was found to be the best nitrogen source for cell growth and soytone was good tor protease production. Oxygen transfer rate played an important role in producing thermostable alkaline protease. Ma'<..imum values of 6.58 glL of dry cell weight and 43.0 UJmL of protease activity were obtained in a batch fermentation using a 2.5 L jar fermentor at 1.93 X 102 hr-l of volumetric oxygen transfer coeff'jcient (kLa). Addition of 200 mgIL humic acid to the growth medium resulted in 1.64 times higher protease activity and 1.77 times higher cell growth than the case without humic acid addition.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.6
• /
• pp.881-891
• /
• 2003

Paenibacillus polymyxa is a plant growth-promoting rhizobacterium (PGPR) which can be used for biological control of plant diseases. Several bacterial strains were isolated from rotten roots of Korean ginseng (Panax ginseng C. A. Meyer) that were in storage. These strains were identified as P. polymyxa, based on a RAPD analysis using a P. polymyxa-specific primer, cultural and physiological characteristics, an analysis utilizing the Biolog system, gas chromatography of fatty acid methyl esters (GC-FAME), and the 16S rDNA sequence analysis. These strains were found to cause the rot in stored ginseng roots. Twenty-six P. polymyxa strains, including twenty GBR strains, were phylogenetically classified into two groups according to the ERIC and BOX-PCR analyses and 16S rDNA sequencing, and the resulting groupings systematized to the degrees of virulence of each strain in causing root rot. In particular, highly virulent GBR strains clustered together, and this group may be considered as subspecies or biovar. The virulence of the strains seemed to be related to their starch hydrolysis enzyme activity, but not their cellulase or hemicellulase activity, since strains with reduced or no starch-hydrolytic activity showed little or no virulence. Artificial inoculation of the highly virulent strain GBR-1 onto the root surfaces of Korean ginseng resulted in small brown lesions which were sunken and confined to the outer portion of the root. Ginseng root discs inoculated in vitro or two-year-old roots grown in soil drenched with the inoculum developed significant rot only when the inoculum density was $10^{6}-10^{7}$ or more colony-forming units (CFU) per ml. These results suggest that P. polymyxa might induce ginseng root rot if their population levels are high. Based on these results, it is recommended that the concentration of P. polymyxa should be monitored, when it is used as a biocontrol agent of ginseng, especially in the treatment of stored roots.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.149-167
• /
• 2013

This study focuses how storytelling in advertising has introduced and determinated mobile telecommunication technology as a digital technology in the process of its rapid acceptance into our society. The objective of the study is to confirm the role of advertising in introducing technology into a society and the relation between advertising and technology by chasing the digital discourse produced by advertising while digital technology permeates through our society. This study uses content analysis for basic research and discourse analysis for exploring the change of digital discourse in the corporate ads of mobile telecommunication companies since 15 years. As a result, 1) 'digital' and 'analogue' discourses were found to be competing and contesting with each other across the years. Digital discourse mainly connected to a new mode of thinking and lifestyle appeared predominant in the early period, but eventually gave way to its alternative, analogue dialogue. The analogue discourse was brought with such values as humanity, slowness and happiness, which has been by and large undermined by the new, fancy digital technologies and their world, 2) whereas some mixed forms of these two discourses were also found. 3) In the meantime, digital-based mobile communication technologies were identified with people who think outside of box and have an innovative attitude toward their life in the ads. Through this signification process, the ads contribute to permeation of mobile communication technology into our daily life.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.638-649
• /
• 2013

This study focuses on analyzing the trend of Korean movies and the issues caused by industrialization and the alternatives. The results are as follows: first, there does not exist distinctive genre movie as most of the movie producers concentrate on thoughtless genre fusion of movie, simply hoping for box office success. Second, Giant companies that has large amounts of money and distributors tend to monopolize production, distribution, and running of movie. Consequently, the development of diversity and artistry is absolutely impeded. Third, the structure of Korean movie industry make some well-known movie stars survive the film world and staff members and actors except them face economic difficulty. The solution plans for the problems mentioned above can be drawn like this; first, genre film with distinctive features should be developed. Second, the monopolistic structure of the screen should be changed. Legal organizations are required to redesign the system of unfair Korean film industry. Third, it is suggested that quantitative expansion of special theaters of diversity film be urgently needed. Fourth, appearance fees given to popular movie stars, actors, and staff members have to be provided in a balanced way. Fifth, the way for revitalization of film production should be found through the legal examination of fund for film development. Last but not least, the profit from the additional film market ought to be made.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.385-392
• /
• 2008

In this study, seawater intrusion was assessed employing a kind of biological parameters such as Escherichia coli and Enterococcus faecalis while lab-prepared reclaimed water was recharged to prevent seawater intrusion. Chemical factors indicating seawater intrusion such as Cl$^-$, Ca$^{2+}$, Mg$^{2+}$ and specific conductivity were also simultaneously investigated where an ion exchange between a matrix in artificial aquifer and cations in solution was estimated. Both Escherichia coli and Enterococcus faecalis were shown to be very sensitive against degree of salinity during saline water intrusion. Enterococcus faecalis more strongly resisted against salinity than that of Escherichia coli. The ratio of Enterococcus faecalis divided by E. coli in the process of seawater intrusion increased up to more than 50$\sim$100 times in 18 hours whereas E. coli was died off more than 90% during pumping and recharge rate kept at 10 mL/min. However, when the rates of both recharge and pumping was kept at 5 mL/min, Enterococcus faecalis / Escherichia coli was sustained in the range of 2.5$\sim$5.0, while Escherichia coli showed dimished death rate. Chemical factors such as Cl$^-$, Ca$^{2+}$, Mg$^{2+}$ and specific conductivity showed more than 0.9 of high correlation each other well explaining the degree of seawater intrusion. The degree of ion exchange between artificial aquifer and saline water can be efficiently interpreted by both minus $\Delta$Na, $\Delta$Mg variation and positive $\Delta$Ca variation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.2
• /
• pp.17-29
• /
• 2020

The objective of this study was to find an optimum methane yield condition in anaerobic digestion of sewage sludge with microwave pretreatment. The pretreatment process was carried out using a lab scale industrial microwave unit (2,450 MHz frequency). The digestion efficiency of pretreated sludge was evaluated by biochemical methane potential (BMP) test. Box-Behnken design and Response Surface Analysis (RSA) were applied to determine the optimal combination of sludge mixing ratio (0 to 100%), power (400 to 1600 W), holding time (0 to 10 min) and pretreatment temperature (60 to 100℃). BMP test results showed that Volatile Solid (VS) removal efficiency was up to 48% at a condition of 0% for mixing ratio, 1600 W for power, 5 min for holding time, and 80℃ for pretreatment temperature. Methane production was up to 832.3 mL/g VS_removed at a condition of 50% for mixing ratio, 1000 W for power, 5 min for holding time, and 80℃ for pretreatment temperature. The results of the variance analysis (ANOVA) showed that the p-value of the power and pretreatment temperature among the independent variables were significant (p<0.05), and in particular, the pretreatment temperature significantly affected on the solubilization and methane production. The optimum condition for the maximum methane yield (847 mL/g VS_removed) was consist of 38.4% of mixing ratio, 909.1 W of power, 4.1 min of holding time, and 80℃ of temperature within the design boundaries.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.653-665
• /
• 2020

As the use of recommended agents has become more active, the "Explain Facilities" is drawing attention as a way to solve the black-box problem that could not explain internal logic to users. This study wants to look at how the description Method and Detail affects to user experience. The Explanation method was divided into 'why the agent did a particular action' and 'why not do a particular action' and the detail condition were divided into 'high or low'. Studies have found that 'why method' have a positive effect on users' transparency, trust, satisfaction, and behavioral intention to use, and 'high detail condition' higher the user' Psychological reactance. In addition, it was found that the explanation methods and detail influenced the 'Explanation' perception through interaction and tended to affect satisfaction and intention to adopt recommendation. This study suggested that careful attention is needed to determine the method and detail of the Explanation facilities in the context of the recommended agent, based on the research findings that it affects the user experience through the interaction of the method and detail.