• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.3
• /
• pp.60-66
• /
• 2012

In this paper, we propose abandoned object detection algorithm. When abandoned object was occluded other object, the existing methods cannot detect abandoned object because those methods are not able to estimate the location of abandoned object. In order to overcome this problem, the proposed algorithm extracts the corners around abandoned object. The detected corners are linked to center of abandoned object called by supporters. We can then estimate the location of abandoned object by using supporters. Therefore, the proposed algorithm can detect and estimate the location of abandoned object, when abandoned object is occluded by other object. For this reason, the proposed algorithm can be applied to intelligent surveillance system to prevent bomb terror, which disguises as luggage or box.

• Fashion & Textile Research Journal
• /
• v.6 no.1
• /
• pp.17-22
• /
• 2004

The purpose of this study was to obtain the basic element of patterns, which is the motif, from the existing art works and use it to create and simulate a variety of patterns to show the practical use of the computer. Natural dyed works of geometric shapes like squares and 1/4 of circles, each dyed with a different natural dyes, were produced and motifs were extracted. Then using the 4D box in Adobe Photoshop v.6.0, the developing pattern change and simulation effects when using different patterns and different repetition settings were examined. Observations were made as the motifs were replicated. Different patterns like a diagonal line, a square and a circle appeared. In order to find out the effects according to the changes, the motifs from work's square portions, circle centre, and the composition of eight motifs were extracted and used. The repeated patterns according to the extracted motifs simply showed that in the case of just repeating and arranging, square patterns appeared. By replicating and arranging, the motif and the allophone were matched and patterns with regular lines were formed, like a twill, pointed twill line. By setting the direction to Y and X in the repetition methodes, a typical half-drop arrangement or a brick pattern arrangement were formed according to 1/4, 2/4, 3/4, 1/3, or 2/3 in changes. Also the steepness of the slope changes quickly or in turn slowly as the rhombus shape appears. However in the case of a composed motif, an ogee pattern appeared. Lastly, by 3-D mapping patterns like a slant line, pointed twill patterns, diamond patterns, and the repeat patterns of a motif with a circle and a line combined, and a circle motif, an optical illusion could be observed.

• Journal of Biosystems Engineering
• /
• v.8 no.2
• /
• pp.62-68
• /
• 1983

This study was to examine the drying characteristics of barley and the effect of moisture content of barley on milling performance. A barley variety, Jogang, having 35.0% of initial moisture content was used for this experiment. Thermo-hydrostatic dryer which consists of blower, condensor, heater, humidifier, drying chamber and control box, etc., was used for the drying experiment. The change in the weight of a barley sample was continuously measured by means of the ring type load cell installed inside the drying chamber. Milling test runs the samples having the predetermined moisture content were taken from each drying test run. A laboratory type barley miller was used for the milling test. The results of the study are summarized as follows: 1. The drying constants (k) applied for the thin layer drying model, (M-Me)/(Mo-Me) = $Ae^{-kt}$ were 0.155, 0.259 and 0.548, respectively, at the three levels of drying temperatures, $40^{\circ}C$, $50^{\circ}C$ and $60^{\circ}C$. The drying constants complied with the Arrhenius Equation, K = Ko exp (-C/T), were determined as $Ko=1.901455{\times}10^8$ and C = 6563. 2. The laboratory milling test indicated that the highest milled and head barley recovery was resulted from the sample which was dryed at $40^{\circ}C$. In general, the increase in the drying temperature from $40^{\circ}C$ to $60^{\circ}C$ indicated a negative effect on milling yields. 3. Also, the sample having 15% M.C. presented the highest milled and head barley recovery among the five moisture content levels (12, 15, 18,21 and 24%).

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.272-281
• /
• 2013

Concrete filled tube (CFT) columns, which consist of a steel tube filled with concrete, combine the benefits of the two materials. The steel tube provides a confining pressure to the concrete, while the local buckling of steel plate can be prevented by the concrete core. CFT columns also have a high fire resistance due to the heat storage effect of concrete under fire. For this reason, it is possible to develop CFT columns without fire protection measures. CFT columns without fire protection have many advantages, including quality control, cost reduction, better space efficiency and a shorter construction period. Due to these advantages, studies on the development of CFT columns without fire protection measures have been performed. However, CFT columns lose their bearing capacity under fire because the steel tube is exposed to the outside. As a result, the structure is collapsed, causing significant damage. In this research, we made a CFT column using high strength concrete (100 MPa) and high strength steel (800 MPa). We use steel fiber and nylon fiber with concrete to provide fire resistance. We perform the fresh concrete experiment and investigate the fire resistance of the CFT column (${\Box}400{\times}400{\times}15{\times}3000mm$) under loading. To investigate the effect of steel fiber on increasing fire resistance, we compare the fire resistance time according to the steel fiber. Through the test, it was found that the CFT specimen with steel fiber had better fire resistance performance than other cases.

• Journal of the Korean Society for Heat Treatment
• /
• v.26 no.2
• /
• pp.55-58
• /
• 2013

ITO thin films deposited on glass substrate with RF magnetron sputtering were vacuum annealed at 100, 200 and $300^{\circ}C$ for 30 minutes and then effect of annealing temperature on the structural, electrical and optical properties of ITO films were investigated. The structural properties are strongly related to annealing temperature. The annealed films above $100^{\circ}C$ are grown as a hexagonal wurtzite phase and the largest grain size is observed in the films annealed at $300^{\circ}C$. The electrical resistivity also decreases as low as $4.65{\times}10^{-4}{\Omega}cm$ with a increase in annealing temperature and ITO film annealed at $300^{\circ}C$ shows the lowest sheet resistance of $43.6{\Omega}/{\Box}$. The optical transmittance in a visible wavelength region also depends on the annealing temperature. The films annealed at $300^{\circ}C$ show higher transmittance of 80.6% than those of the films prepared in this study.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.2
• /
• pp.41-47
• /
• 2008

This paper describes the results of model experiments in the laboratory, which were conducted to assess the behavior characteristics of geosynthetic reinforced soil walls according to different surcharge loads and reinforcement types. The model walls were built in the box having dimension, 100 cm tall, 140 cm long, and 100cm wide. Three types of geosynthetics, geonet, geogrid A and geogrid B, are used as the reinforcements. Decomposed granite soil (SM) was used as a backfill material. Seven model walls are constructed and tested. After the construction of the model wall, the LVDTs are installed to obtain the displacements of the wall face. As the results of the model tests, the maximum horizontal displacements of the model walls occurred due to uniform surcharge pressure were measured at the 0.7H from the bottom of the wall. The more the reinforcement strength increases, the more the wall displacements decrease, and also the reduction ratio of the wall displacement decrease with increasing the surcharge pressure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.71-78
• /
• 2015

The reliable sloshing assessment methods for LNG CCS(cargo containment system) are important to satisfy the structural strength of the systems. Multiphase fluid flow of LNG and Gas Compressibility may have a large effect on excited pressures and structural response. Impinging jet model has been introduced to simulate the impact of the LNG sloshing and analyze structural response of LNG CCS as a practical FSI(fluid structure interaction) method. The practical method based on fluid structure interaction analysis is employed in order to evaluate the structural strength in actual scale for Mark III CCS. The numerical model is based on an Euler model that employs the CVFEM(control volume based finite element method). It includes the particle motion of gas to simulate not only the interphase interaction between LNG liquid and gas and the impact load on the LNG insulation box. The analysis results by proposed method are evaluated and discussed for an effectiveness of FSI analysis method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.4
• /
• pp.565-570
• /
• 1989

The influence of age at first calving on the milk production of crossbred dairy cows produced under major dairy cattle crossbreeding projects in Pakistan was studied from the year 1974 to 1980. These animals were bred and raised at the Livestock Production Research Institute, Bahadarnagar (LPRI), Livestock Experiment Station, Karachi (LES) and the University of Agriculture, Faisalabad (UAF). Local Sahiwal (SWL) cattle were crossed with the European breeds, Holstein Friesian (HF) and Jersey (J) at LPRI and UAF. At LES, native Red Sindhi (RS) were crossed with the HF and J breeds. At LES and UAF, the crossbred progeny, thus, produced comprised of halfbreds only while at LPRI 3/4 HF, 3/4 J, 1/4 HF and 1/4 J groups were also available for this study. The average age at first calving was considerably higher among the native breeds. At LES, the RS calved for the first time at an age of approximately 56 months. Corresponding values for SWLs at LPRI and UAF were 44 and 64 months, respectively. The 1/2 HF and 1/2 J crossbreds calved first at the age of approximately 25, 26, 34, 36, 37 and 38 months at LPRI, LES and UAF respectively. For 3/4 HF, 3/4 K, 1/4 HF and 1/4 J groups of LPRI the average age at first calving was 29, 26, 34 and 33 months. Considerable differences in age at first calving between the crossbreds and native breeds were observed. Due to early maturity, the former attained the peak level of milk production in third lactation whereas the latter groups, because of late maturity, reached this level in their fourth lactation. This study suggested that early maturity in Zebu cattle (Box indicus) could be induced through crossbreeding with European cattle (Bos Taurus).

• Journal of Animal Science and Technology
• /
• v.56 no.4
• /
• pp.12.1-12.7
• /
• 2014

This study investigated changes in gene expression by dietary fat source, i.e., beef tallow, soybean oil, olive oil, and coconut oil (each 3% in feed), in both male and female growing-finishing pigs. Real-time PCR was conducted on seven genes (insulin receptor; INSR, insulin receptor substrate; IRS, phosphatidylinositol (3,4,5)-triphosphate; PIP3, 3-phosphoinositide-dependent protein kinase-1; PDK1, protein kinase B; Akt, forkhead box protein O1; FOXO1 and cGMP-inhibited 3', 5'-cyclic phosphodiesterase; PDE3) located upstream of the insulin signaling pathway in the longissimus dorsi muscle (LM) of pigs. The INSR, IRS, PIP3, and PDE3 genes showed significantly differential expression in barrow pigs. Expression of the PIP3 and FOXO1 genes was significantly different among the four dietary groups in gilt pigs. In particular, the PIP3 gene showed the opposite expression pattern between barrow and gilt pigs. These results show that dietary fat source affected patterns of gene expression according to animal gender. Further, the results indicate that the type of dietary fat affects insulin signaling-related gene expression in the LM of pigs. These results can be applied to livestock production by promoting the use of discriminatory feed supplies.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.1
• /
• pp.72-81
• /
• 2007

This study mainly aims at suggesting plans applicable to the outdoor of environment-friendly communities in Korea by leveraging more natural conditions and materials when creating an outdoor biotop for an environment-friendly community and generating material types and development techniques enabling a natural circulation system. To this end, materials used in the outdoor of environment-friendly communities and traditional residential areas in Korea and biotop materials found in natural areas were examined. First, when the case examples of environment-friendly communities were reviewed, biotop spaces and materials that may function as habitats were hardly found. Materials used in biotop were mainly man-made structures made of artificial or processed materials, such as concrete, stones, bricks, woods and steels. Meanwhile, the outdoor space of traditional Korean villages had stone walls, soil walls, rock piles and composite piles, which composed of natural materials such as rocks, soil and plants, that naturally formed porous spaces along with the introduction of plants and provided habitats for a variety of insects. In natural areas, naturally created biotop spaces, such as rock piles, log piles, old tree deployment, branch piles, hay stacks and defoliated leaves, were found. Meanwhile, when spaces and materials available for biotop creation were reviewed to create an environment-friendly residential complex, they were divided into fences and hedges, green spaces between parks and residential buildings, ponds and waterscape spaces, zones separating pedestrian walks and roadways, breast walls and slope boundary, plant box and pergola. For each space, materials used for creating biotops and that were found in traditional Korean residential areas and natural areas were applied and suggested.