• 대한인간공학회지
• /
• 제32권3호
• /
• pp.237-243
• /
• 2013

Objective: The present study developed an estimation method of boundary zone representative humanoids(hereafter, EBZ method) using descriptive statistics on the design target population. Background: The boundary zone method(hereafter, BZ method) generates representative humanoids at a boundary zone that statistically accommodates a designated percent of the design target population; however, the BZ method has a practical limitation because it requires a large scale anthropometric database on the design target population. Method: The EBZ method developed in the present study consisted of 3 steps. In the first step, the boundary zone of accommodating a designated percent(e.g., 90%) is formed under the assumption of normal distributions for anthropometric sizes. In the second step, cases that fall within the boundary zone are estimated using descriptive statistics(mean, standard deviation, and covariance) on the design target population. In the last step, K-mean cluster analysis is conducted for the cases, and representative humanoids are selected from each of clusters. Results: Evaluation results showed that mean accommodation percent of the EBZ method was 90.9%(range: 90.8~91.1%) which is similar to the target percent(90%). In addition, standard deviation of accommodation percent for 100 repetitions was 0.1%. Lastly, the number of representative humanoids generated by the EBZ method(n = 20) was similar to the BZ method(n = 16). Conclusion: The EBZ method can generate representative humanoids which accommodate a designated percent of the design target population using descriptive statistics. Application: The EBZ method can be utilized in the generation of humanoids for ergonomic design and evaluation of products when the large scale anthropometric database on the design target population is not existed.

• 대한산업공학회지
• /
• 제31권1호
• /
• pp.36-43
• /
• 2005

It is the basic requirement of design process of parts assembly to specify geometric dimensions and tolerances of product characteristics. Among them, tolerance stack analysis is one of the important methods to specify tolerance zone. Tolerance stack analysis is to calculate gap using tolerances which includes geometric and coordinate dimensions. In this study, we suggested more general method called the virtual method to analyze tolerance stack. In virtual method, tolerance zone is formed by combination of dimensional tolerance, geometric tolerance and bonus tolerance. Also tolerance zone is classified by virtual boundary condition and resultant boundary condition. So gap can be defined by combination of virtual boundary and/or resultant boundary. Several examples are used to show the effectiveness of new method comparing to other methods.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.197-204
• /
• 1999

The boundary element method was used for studying singularities of an interface crack with contact zones. The iterative procedure is applied to estimate the contact zone size. Because the contact zone size was extremely small in a tension field, a large number of Gaussian points were used for numerical integration of the Kernels. Stress extrapolation method and J-integral were used ofr determining stress intensity factors. When the interface crack was assumed to have opened tips, oscillatory singularities appear near the tips of the interface crack. But the interface crack with contact zone which Comninou suggested had no oscillatory behavior. The contact zone size under shear loading was much larger than that under tensile. The stress intensity factors computed by stress extrapolation method were close to those of Comninou's solution. And the stress intensity factor evaluated by J-integral was similar to that by stress extrapolation method.

• Computers and Concrete
• /
• 제2권2호
• /
• pp.111-123
• /
• 2005

The ductility of reinforced concrete bearing walls subjected to high axial loading and moment can be enhanced by improving the deformability of the compression zone or by reducing the neutral axis depth. The current state-of-the-art procedure evaluating the confinement effect prompts a consideration of the spaces between the transverse and longitudinal reinforcing bars, and a provision of tie bars. At the same time, consideration must also be given to the thickness of the walls. However, such considerations indicate that the confinement effect cannot be expected with the current practice of detailing wall ends in Korea. As an alternative, a comprehensive method for dimensioning boundary elements is proposed so that the entire section of a boundary element can stay within the compression zone when the full flexural strength of the wall is developed. In this comprehensive method, the once predominant code approach for determining the compression zone has been advanced by considering the rectangular stress block parameters varying with the extreme compression fiber strain. Moreover, the size of boundary elements can also be determined in relation to the architectural requirement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.837-842
• /
• 1994

The boundary element method was used for studying singularities of an interface crack with contact zones. Because the contact zone size was extremely small in a tention field, a large number of Gaussian points were is used for numerical integration of the Kernels. In order to estimate the contact zone size, iteration method was used. The interface crack tips with contact zones showed no oscillatory behavior and J-integral values across the interface were conserved.

• 한국산학기술학회논문지
• /
• 제21권8호
• /
• pp.60-66
• /
• 2020

본 연구에서는 화학사고 및 화학테러 대응 시 화학물질로부터 인명 및 환경을 보호하기 위한 경계구역 설정에 관하여 국·내외 사례 조사를 바탕으로 우리나라 실정에 적합한 경계구역 선정 개선방안을 제시하고자 하였다. 현재 다양한 관계부처에서는 공통적으로 hot zone, warm zone, cold zone으로 구분하여 사용 중이나 특정 지역에 대해서는 용어 활용 측면에서 상이한 의미로 혼용되고 있다. 따라서 경계구역을 기존 3개 지역에서 hot zone, warm zone, cold zone, safety zone 4개 지역으로 구분하여 활용할 것을 제시하였다. 그리고 warm zone을 관심지역, safety zone을 안전지역으로 용어를 정립하도록 한다. 기존에 적용하던 ERPG 급성노출기준은 다양한 노출시간을 고려하지 않기 때문에 장시간 노출상황 적용에 적합하지 않으므로 적용 우선순위를 AEGL, ERPG, PAC, IDLHs 순으로 하도록 한다. CARIS 정보제공 방안은 확산평가가 가능한 물질 또는 불가능한 물질이거나 실내누출 상황으로 구분하고 풍향신뢰선과 ERG의 초기이격거리 및 방호활동거리를 함께 표현하여 현장대응 및 주민대피 결정 정보자료로 활용될 수 있도록 한다.

• 한국표면공학회지
• /
• 제38권6호
• /
• pp.227-233
• /
• 2005

Electrochemical characteristics of welded stainless steels containing Ti have been studied by using the electrochemical techniques in 0.5 M $H_2SO_4$+0.01 M KSCN solutions at $25^{\circ}C$. Stainless steels with 12 mm thick-ness containing $0.2{\~}0.9 wt\%$ Ti were fabricated with vacuum melting and following rolling process. The stainless steels were solutionized for 1hr at $1050^{\circ}C$ and welded by MIG method. Samples were individually prepared with welded zone, heat affected zone, and matrix for intergranular corrosion and pitting test. Optical microscope, XRD and SEM are used for analysing microstructure, surface and corrosion morphology of the stainless steels. The welded zone of the stainless steel with lower Ti content have shown dendrite structure mixed with $\gamma$ and $\delta$ phase. The Cr-carbides were precipitated at twin and grain boundary in heat affected zone of the steel and also the matrix had the typical solutionized structure. The result of electrochemical measurements showed that the corrosion potential of welded stainless steel were Increased with higher Ti content. On the other hand, reactivation($I_r$), passivation and active current($I_a$) density were decreased with higher Ti content. In the case of lower Ti content, the corrosion attack of welded stainless steel was remarkably occurred along intergranular boundary and ${\gamma}/{\delta}$ phase boundary in heat affected zone.

• Structural Engineering and Mechanics
• /
• 제48권6호
• /
• pp.775-789
• /
• 2013

The current paper proposes a boundary element formulation, applicable to 2-D and 3-D elastostatics problems using a unified approach for transformations of the domain integrals into boundary integrals. The method is applicable to linear problems encompassing both finite and infinite multi-region domains allowing non-vanishing body forces. Numerical results agree quite well with the analytical solutions; while the present method offers easy formulation with less numerical efforts in comparison to FEM or some BEM which need interior points to treat arbitrary body forces. It is demonstrated that the method has the potential to have profound impact on engineering design, notably in dam-foundation interaction.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.26-32
• /
• 2010

SM45C steel rods using generally for machine components were selected and welded by butt-GMA welding method for this study. And then they were studied about characteristics of fatigue behavior and fracture surfaces by rotary bending test. Fatigue strength in weld zone present highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. The region of infinite life by Haigh diagram present highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. Fatigue cracks in unnotched specimens of base metal and weld zone introduce simultaneously from extensive out-side of circumferential cross-section and propagate to the other side indicating beach markings and dimples according to consolidation of fatigue cracks. Fatigue cracks in all of notched specimens introduce simultaneously in out-side of circumferential cross-section by high stresses and propagate to center of it indicating beach markings.

• Ocean Systems Engineering
• /
• 제4권2호
• /
• pp.83-97
• /
• 2014

Wave propagation in a three-dimensional (3D) fully nonlinear numerical wave tank (NWT) is studied based on velocity potential theory. The governing Laplace equation with fully nonlinear boundary conditions on the moving free surface is solved using the indirect desingularized boundary integral equation method (DBIEM). The fourth-order predictor-corrector Adams-Bashforth-Moulton scheme (ABM4) and mixed Eulerian-Lagrangian (MEL) method are used for the time-stepping integration of the free surface boundary conditions. A smoothing algorithm, B-spline, is applied to eliminate the possible saw-tooth instabilities. The artificial wave speed employed in MTF (multi-transmitting formula) approach is investigated for fully nonlinear wave problem. The numerical results from incorporating the damping zone (DZ), MTF and MTF coupled DZ (MTF+DZ) methods as radiation condition are compared with analytical solution. An effective MTF+DZ method is finally adopted to simulate the 3D linear wave, second-order wave and irregular wave propagation. It is shown that the MTF+DZ method can be used for simulating fully nonlinear wave propagation very efficiently.