• Wind and Structures
• /
• 제20권1호
• /
• pp.15-36
• /
• 2015

Characterization of wind flows over a complex terrain, especially mountain-gorge terrain (referred to as the very complex terrain with rolling mountains and deep narrow gorges), is an important issue for design and operation of long-span bridges constructed in this area. In both wind tunnel testing and numerical simulation, a transition section is often used to connect the wind tunnel floor or computational domain bottom and the boundary top of the terrain model in order to generate a smooth flow transition over the edge of the terrain model. Although the transition section plays an important role in simulation of wind field over complex terrain, an appropriate shape needs investigation. In this study, two principles for selecting an appropriate shape of boundary transition section were proposed, and a theoretical curve serving for the mountain-gorge terrain model was derived based on potential flow theory around a circular cylinder. Then a two-dimensional (2-D) simulation was used to compare the flow transition performance between the proposed curved transition section and the traditional ramp transition section in a wind tunnel. Furthermore, the wind velocity field induced by the curved transition section with an equivalent slope of $30^{\circ}$ was investigated in detail, and a parameter called the 'velocity stability factor' was defined; an analytical model for predicting the velocity stability factor was also proposed. The results show that the proposed curved transition section has a better flow transition performance compared with the traditional ramp transition section. The proposed analytical model can also adequately predict the velocity stability factor of the wind field.

• 지구물리와물리탐사
• /
• 제25권1호
• /
• pp.1-13
• /
• 2022

포항분지 천부가스 탐사를 위해 육상과 해상이 연결되는 전이대에서 탄성파 탐사 방법을 제안하고 탐사를 수행하였다. 해저면 환경, 육상 탐사 환경을 고려하여 탐사를 설계하였다. 육상노드 수진기는 육상에만 설치하였고 육상에서는 바이브로사이스 음원을, 해양에서는 에어건 음원을 이용하여 자료를 취득하였다. 전이대에서 취득한 탄성파 탐사자료의 경우 육상탐사와 해상탐사 간의 정확한 연계를 위해 신중한 자료 취득과 처리 과정이 필요하다. 음원 종류에 따른 진폭과 위상변화를 고려하고, 음원위치에 따른 정적보정을 적용한 자료처리를 통해 지층단면도에서 반사파 연속성이 유지되게 하였다. 자료처리 결과 육상과 해상의 지층구조가 연결된 탄성파 지층단면도를 확보하고 포항분지 천부 가스층 탐사에 활용하고자 하였다. 전이대에서 탄성파 탐사는 천부가스뿐만 아니라 연안지역 단층대 조사에도 활용할 수 있을 것으로 기대된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제12권2호
• /
• pp.46-56
• /
• 1988

The author has presented a new approach to design hydrofoil section shapes in consideration of viscous for marine propeller blades. In suction sides of propeller blades, the pressure distribution on hydrofoil sections in non-cavitating flow should be examined before the study of cavitation characteristics. Generally, the calculation results for hydrofoil conformal mapping method by which neglect viscous effects do not agree with experimental ones. Moreover, another papers reported that laminar separation bubble and transition played an important role on the cavitation inception. From these considerations, it is very important to study the viscous effects of the hydrofoil sections, especially the mechanism separation bubble and the apparent thickness of hydrofoil section. Therefore, the new design method of hydrofoil sections in consideration of viscous effects in comparison to the airfoil section should be studied. In designing the new hydrofoil section shapes, based on Eppler theory, the author tried to give the peak negative pressure in leading edge region for NACA airfoil in consideration of viscous effects without turbulent boundary layer separation as much as possible. The design method was verified from the fact that the boundary characteristics was improved and the lifts of new hydrofoils were slightly in creased in comparison to these of NACA 16-012 symmetrical, NACA 4412 non-symmetrical airfoils.

• 물과 미래
• /
• 제27권2호
• /
• pp.85-96
• /
• 1994

자연하천의 부정류에 Preissmann 기법을 적용시 나타나는 수치 불안정성의 원인을 규명하고 불안정성을 극복하기 위한 적절한 대책을 제시하였다. 주된 불안정성의 원인으로는 천이류, 하도단면의 급격한 변화, 부적절한 조도계수, 계산시간 및 거리간격, 급격하게 증가하는 유입수문곡선, 그리고 마른 하상 등이다. 이런 불안정성의 주된 원인은 천이류의 발생과 관계가 있으며 상류-사류가 공존하는 자연 하도에서 천이류를 해석할 수 있는 모형을 제안하였다. 가상하도를 통하여 모의 수치실험을 수행한 결과 전하도구간에 대하여 안정성있게 수렴하고 있었으며, 일관성있는 유량, 수위자료를 얻을 수 있었다. 본 연구의 모형은 앞으로 실제 하천자료를 통해 적용성의 검증이 이루어진다면 천이류로 발생하는 수치계산의 어려움의 해결에 기여할 수 있다고 판단된다.

• 한국지반공학회논문집
• /
• 제31권9호
• /
• pp.29-38
• /
• 2015

이 연구에서는 열차가 교량 접속부를 통과하면서 발생되는 동적상호작용 문제를 유한요소해석프로그램을 이용하여 검토하였다. 해석대상구간에서의 궤도틀림조건은 부등침하량을 삼각함수를 이용하여 이상화하고, 철도공사 선로 보수기준을 만족하는 최대 궤도틀림 한계치를 해석조건으로 설정하였다. 해석대상이 되는 접속부 구조물의 체결장치 아래 부분은 모두 3차원 입체요소로 모형화하였으며, 해석비용을 줄이기 위하여 1/2 궤도부분만을 모형화하였다. 경계조건은 평면변형률상태에 준하는 것으로 차량-궤도 동적상호작용해석을 수행하였다. 국내 콘크리트궤도용 표준 접속부에서의 궤도틀림에 따른 열차 주행시 동적상호작용해석을 수행하여 윤중감소율과 차체수직진동가속도를 살펴보았으며, 접속부의 시멘트 안정처리골재, 일반골재, 일반토사구간에서의 발생된 최대 Mises응력으로 동적거동을 평가하였다.

• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.51-57
• /
• 2015

In the present study, two-dimensional numerical investigation of flow past a square cylinder beneath the free surface has been performed to identify the effects of presence of the free surface. An immersed boundary method was adopted for implementation of the cylinder cross-section in a Cartesian grid system. Also, a level-set method was used to capture the interface of two fluids. To prevent transition to three-dimensional flow, Reynolds number chosen for this simulation was 150. The cases for Froude number 0.2 and gap ratio(h/D) between 0.25 and 5.00 were examined. At the specific Reynolds number, we study the effects of gap ratio on flow characteristics around a square cylinder by computing flow fields, force coefficients and Strouhal number.

• 에너지공학
• /
• 제12권2호
• /
• pp.131-138
• /
• 2003

본 연구에서는 평판 경계층의 천이 영역에서 평균속도, 표면마찰계수, 간헐도 분포, 에너지 스펙트럼 등의 신뢰성 있는 실험 자료를 획득하였다. 실험 결과 천이가 진행됨에 따라 난류반점이 지배하는 영역이 벽면 근처에서 전 경계층으로 확산되었으며 이러한 현상의 결과로 속도 섭동량에서 비등방성이 크게 나타난다. 천이 이전영역에서는 에너지가 주로 저주파에 집중되어 있다가 천이를 거치면서 에너지가 고주파 성분으로 이동하였다 이는 두 가지 이상의 에너지 발생과 소멸 메커니즘이 천이영역에서 공존하고 있음을 의미한다. 따라서 천이영역에서의 유동장을 예측하기 위한 난류 계산 모형에서 비등방성과 서로 다른 메커니즘을 표현할 수 있기 위해서는 반드시 두 가지 이상의 척도를 표현할 수 있어야 한다.

• 한국가시화정보학회지
• /
• 제21권2호
• /
• pp.24-33
• /
• 2023

This work is to observe the wake flow generated behind a ramp. We have conducted a large eddy simulation with two ramp models having different heights with two different inflow conditions. Reynolds number based on the height of the large ramp (LR) and small ramp (SR) are Re_h = 2.8×10⁴ and 1.4×10⁴ respectively. The wake flow visualization shows the formation of streamwise counter-rotating vortices pairs at the downstream of the obstacle. These primary vortices are stretched and lifted up when moving downstream. In order to observe the effect of the inflow condition on the wake transition, two different inlet flow conditions are given on the inlet section as an inlet boundary condition. Induced counter-rotating vortices pairs due to sharp-edged triangular ramp obstacles are developed and propagated downstream. In the result, the large ramp shows a more complicated wake structure of the boundary layer than the small ramp.

• 한국멀티미디어학회논문지
• /
• 제19권6호
• /
• pp.1034-1042
• /
• 2016

The detection of P-waves and T-wave in the electrocardiogram signal analysis is an important issue. But the accuracy of the boundary detection algorithm is an insufficient level in the change of slow transition in the signal compared to the QRS complex. This study proposes an algorithm to detect P-wave and T-wave sequentially after determining local baseline using QRS complex. First, we detected the peak points based on local baseline and determined the onset and offset through the calculation of the area of the section. After modifying the baseline using detected waveform, we detected the other waveform in the same way and separated the P-wave and the T-wave based on the location. We used the PhysioNet QT database to evaluate the performances of the algorithm, and calculate the mean and the standard deviations. The experiment results show that standard deviations are under the tolerances accepted by expert physicians, and outperform the results obtained by the other algorithms.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.213-217
• /
• 2002

We have fabricated successfully single-filament composite $MgB_2$/SUS tapes, as an ultrarobust conductor type. The fabrication of the $MgB_2$/SUS tapes was performed by power-in-tube (PIT) process such as swaging and cold rolling. The critical transition temperatures $T_{c}$~38.5 K and ~36 K were observed for the sintered and the nonsintered $MgB_2$/SUS tapes, respectively In addition, the isothermal magnetization M(H) of the sintered $MgB_2$/SUS tapes was measured at temperatures T (between 5 and 50 K) in fields up to 6 T, employing a PPMS-9 (Quantum Design). The persistent current density (J$T_{P}$) values were obtained from the M(H) data, using Bean model, fur the sintered $MgB_2$/SUS tapes. The estimated values were higher than ~ 6$\times$ $10^{5}$ $A/\textrm{cm}^2$ at T = 5 K, with H : 0 G. We also investigated the cross section of the sintered tapes, by using SEM and EDX. An evidence of weak reaction on boundary between $MgB_2$ and SUS tube is found in the SEM and EDX.X.X.X.