• Geomechanics and Engineering
• /
• 제22권6호
• /
• pp.475-488
• /
• 2020

The recent increase in the use of Expanded Polystyrene (EPS) geofoam in construction and geotechnical projects has driven researchers to investigate its behavior, more deeply. In this paper, a series of experimental tests to investigate the stress-strain behavior and the mechanical properties of EPS blocks, under monotonic axial loading are presented. Four different densities of cylindrically shaped EPS with different dimensions are used to investigate the effects of loading rate, height and diameter, as well as the influence of the density of EPS on the stress-strain response. The results show that increasing the height of the EPS samples leads to instability of the sample and consequent lower resistance to the applied pressure. Large EPS samples show higher Young's modulus and compressive resistance due to some boundary effects. An increase in the rate of loading can increase the elastic moduli and compressive resistance of the EPS geofoam samples, which also varies depending on the density of the samples. It was also determined that the elastic modulus of EPS increases with increasing EPS density. By implementing an efficient numerical procedure, the stress-strain response of EPS geofoam samples can be reproduced with great accuracy. The numerical analysis based on the proposed method can used to evaluate the effect of different factors on the behavior of EPS geofoam.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1092-1095
• /
• 2001

Steady state thermal analysis has been done by a finite element method in a diode of 12kV blocking voltage. The diode was fabricated by soldering ten pieces of 1200V diodes in series, capping a dummy wafer at the far end of diode series, and finally wire bonded for building anode and cathode terminal. In order to achieve high voltage and reliability, the edge of each diode was beveled and passivated by resin with a thickness of 25${\mu}$m. It was assumed that the generated heat which is mainly by the on-state voltage drop, 9V for 12kV diode, is dissipated by way of the conduction through diodes layers to bonding wire and of the convection at the surface of passivating resin. It was predicted by the thermal analysis that the temperature rise of a pn junction of the 12kV diode can reach at the range of 16∼34$^{\circ}C$ under the given boundary conditions. The thickness and thermal conductivity(0.3∼3W/m-K) of the passivating resin did little effect to lower thermal resistance of the diode. As the length of the bonding wire increased, which means the distance of heat conduction path became longer, the thermal resistance increased considerably. The thermal analysis results imply that the generated heat of the diode is dissipated mainly by the conduction through the route of diode-dummy wafer-bonding wire, which suggests to minimize the length of the wire for the lowest thermal resistance.

• 한국분말재료학회지
• /
• 제24권4호
• /
• pp.292-297
• /
• 2017

A metallic oxide layer of a heat-resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation and has a positive effect on the increase in electrical resistivity. In this study, green compacts of Fecralloy powder mixed with amorphous and crystalline silica are oxidized at $950^{\circ}C$ for up to 210 h in order to evaluate the effect of metal oxide on the oxidation and electrical resistivity. The weight change ratio increases as per a parabolic law, and the increase is larger than that observed for Fecralloy owing to the formation of Fe-Si, Fe-Cr composite oxide, and $Al_2O_3$ upon the addition of Si oxide. Si oxides promote the formation of $Al_2O_3$ and Cr oxide at the grain boundary, and obstruct neck formation and the growth of Fecralloy particles to ensure stable electrical resistivity.

• 지질공학
• /
• 제8권1호
• /
• pp.25-34
• /
• 1998

흙은 실제 비균질,비등방성이기 때문에 정확한 지반 특성을 파악하기는 쉽지 않다. 또한, 지반조사는 시간적, 경제적 측면에서 비효율적인 경우가 많다. 따라서, 본 연구는 지반조사의 효율적인 방법을 제시하기 위해 콘 관입치와 탄성속도에 대한 연약지반의 특성 파악에 적합한 장비로서 본 연구에서는 휴대용 원추형 콘관입시험기를 사용하였다. 휴대용 원추형 콘관입시험기는 조작이 편리하고 신속하게 지반상태를 파악할 수 있는 장점이 있다. 또한, 탄성탐사는 물리 탐사방법중 개략적 지반상태의 추정에 가장 많이 이용되는 방법으로 연약지반에 대한 이용이 계속 증가하고 있다. 콘저항치는 심도별 지층구성에 따라 일정한 군을 형성하였고 탄성파속도 또한 지층경계에 따라 일치하는 경향이 나타났다. 따라서, 타성파 속도와 콘관입저항치는 상당한 연관성을 가지고 있으며 이는 지반조사의 효율성을 증대 시킬 수 있을 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.399-402
• /
• 2000

For improvement of B constant in $CaMnO_3$-$CaTiO_3$ perovskite type thermistors, effect of $Cr_2$$O_3$ addition ranged from 0.0wt% to 5.0wt% on electrical properties were investigated with contents and sintering temperatures in the view of crystal and microstructures. The solubility limit of Cr$_2$O$_3$was up to 0.5wt% judging from the result of lattice parameter. The grain size was decreased and the resistance at room temperature and B constant were increased with the addition of $Cr_2$$O_3$.On particular, B constant of$CaMnO_{3-x}$$Cr_2$$O_3$ system was increased greatly from 1574k to 2598k at 0.5wt% $Cr_2$$O_3$addition. Further addition of $Cr_2$$O_3$, however, resulted in the decrease of the resistance and B constant due to the $Cr_2$$O_3$ precipitation on the grain boundary. As the$CaTiO_3$contents increased in the $CaMnO_3$-$CaTiO_3$ system, the resistance at room temperature and B constant were highly changed.

• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.109-116
• /
• 2014

An electrical resistance tomography (ERT) technique combining the particle swarm optimization (PSO) algorithm with the Gauss-Newton method is applied to the visualization of two-phase flows. In the ERT, the electrical conductivity distribution, namely the conductivity values of pixels (numerical meshes) comprising the domain in the context of a numerical image reconstruction algorithm, is estimated with the known injected currents through the electrodes attached on the domain boundary and the measured potentials on those electrodes. In spite of many favorable characteristics of ERT such as no radiation, low cost, and high temporal resolution compared to other tomography techniques, one of the major drawbacks of ERT is low spatial resolution due to the inherent ill-posedness of conventional image reconstruction algorithms. In fact, the number of known data is much less than that of the unknowns (meshes). Recalling that binary mixtures like two-phase flows consist of only two substances with distinct electrical conductivities, this work adopts the PSO algorithm for mesh grouping to reduce the number of unknowns. In order to verify the enhanced performance of the proposed method, several numerical tests are performed. The comparison between the proposed algorithm and conventional Gauss-Newton method shows significant improvements in the quality of reconstructed images.

• Corrosion Science and Technology
• /
• 제22권6호
• /
• pp.435-446
• /
• 2023

Corrosion behaviors of laser-welded super duplex stainless steel (SDSS) tubes after exposure to an actual power plant environment for one year and those of fin-tube welded SDSS were evaluated. Results showed that corrosion damage on the back side of the SDSS tube in the direction of hot air was higher than that on the front side regardless of weldment location. However, corrosion damage showed no difference between weldment and base metal due to recovery of phase fraction in the weldment through post weld heat treatment (PWHT). Nevertheless, the SDSS tube showed severe corrosion damage along grain boundary due to surface phase transformation (δ → γ) and Cr₂N precipitation caused by PWHT with a high N₂ atmosphere. Corrosion resistance of the SDSS tube was recovered when degraded surface was removed. Corrosion sensitivity of a fin-tube increased significantly due to pre-existing crevice, unbalanced phase fraction, and σ phase precipitation adjacent to the fusion line. Although corrosion resistance was improved by recovered phase fraction and sufficient dissolution of σ phase during PWHT, corrosion reaction was concentrated at the pre-existing crevice. These results suggest that welding conditions for fin-tube steel should be optimized to improve corrosion resistance by removing pre-existing crevice in the weldment.

• 패션비즈니스
• /
• 제11권4호
• /
• pp.183-203
• /
• 2007

This study aims at providing useful fundamental information to re-establish the theories of modern fashion by examining the origination and genealogy of street style. The street styles focusing on caucasoid have a variety of genealogies such as western type, beat, teddy boy, hippie, skinhead, punk, neuron-mantic, indie kid, riot grrrl, grunge and techno cyber punk. In the same period, on the contrary, the streets styles focusing on negroid are zootie, hipster, modernist, rude boy, two-tone, rastafarian, funky, B-boy, fly girl, raggamuffine, bhangra, and acid jazz, which are seen as the culture of the large cities formed along Atlantic Ocean and Caribbean sea like England, America and Jamaica. These have root as the main fashion in western society. Ironically, most of the subculture concentrated on the whites were racists. Because of such a reason, the street styles have been formed as resistance culture that was unable to sympathize with their society and characteristics by distinguishing the whites and the colored people. Zootie or hipster that is one of the street fashion styles was formed in the 1940-50s, while the colored people who lived in the west Indies migrated to England or America. As a minimal modernist style called Ivy look in US, in that time, anti-culture formed by teenagers in whitey, teddy boy and mods fashion can be strictly different from the zootie and hipster. The colored people's street styles of the 1960s developed into aggressive and hard forms from the rude boy and two-tone while their resistance toward the whites was stronger. The rastafarian style researched the peak as the colored people's traditional ethnic characteristics or resistance intention for their freedom in the 1970s. In that time, The colored people's street styles of the 1960s developed into aggressive and hard forms from the rude boy and two-tone while their resistance toward the whites was stronger. The rastafarian style researched the peak as the colored people's traditional ethnic characteristics or resistance intention for their freedom in the 1970s. In that time, the street styles of the whites were mostly the skinhead or hippie. Most of them were racists toward the colored people. The punk type on shown on the whites focused on luxury and exaggerative costume. On the contrary, the funky style of the colored people focused on aggressive nihilism and form. With B-boy, fly girl, reggae, rap music, and break dancing in the 1980s, the subculture gradually told on the high fashion as well as the culture between the whites and the colored people. From such aspects, the colored people tried to maintain their unique traditional characteristics. However, their individual values surged by the coming young generation excluded the colored people's characteristic street styles. Focusing on gender, violence and private success among their major concerns, the raga muffin style that represents multi-races and multi-cultures was formed. The jazz style in the 1990s showed cold post-modernistic eclecticism different from that of the 1940s-50s. Simultaneously, the various classes appeared their street styles by emphasizing on each personality. Now that we are living in multi-cultural society, a human race or nationalism concept is getting obscurer. There is no obvious boundary line in the differences between human race and its fashion.

• 생물환경조절학회지
• /
• 제6권3호
• /
• pp.205-215
• /
• 1997

본 연구에서는 온실 재배 토마토 군락의 열수지에 근거한 증산모델을 구성하고 실험을 통하여 모텔에 필요한 계수의 추정과 모질의 검증을 수행하였다. 온실의 일사략과 엽-대기수증기압차(LVPD)를 매개변수로 하는 기공확산저항 추정식을 구성하여 기공작산저항 실측 자료를 이용하여 추정식의 계수를 추정하였다. 이 추정식으로 기공확산저항 변이의 80％ 이상을 설명할 수 있었으며 추정식에 이용하지 않았던 독립 자료를 이용하여 검정한 결과 추정정도가 높아 증산예측 모델의 구성식으로 이용될 수 있는 것으로 판단되었다. 반투과성 매질의 복사 흡수이론을 적용한 Stanghellini의 식을 다소 변형하여 모델의 군락 순복사 추정식으로 사용하였으며 이 추정식에 의하여 계산된 순복사량은 실측치와 잘 일치하였다. 계수 추정에 사용하지 않았던 독립 자료를 이용하여 순복사 및 기공확산저항 추정식으로 구성된 증산예측 모델의 군락온도 및 증산예측 정도를 검증하였다. 모델에 의하여 계산된 군락 온도, 순간 증산속도 및 일 총 증산량은 실측치와 잘 일치하여 본 연구에서 작성된 증산 예측 모델은 온실 재배 토마토의 환경제어, 관개제어 등에 실용적으로 활용될 수 있을 것으로 판단되었다.

• 한국수자원학회논문집
• /
• 제47권11호
• /
• pp.1077-1086
• /
• 2014

댐붕괴에 의해 발생하는 홍수파는 초기수심의 깊이에 따라서 하류부로 전달되는 수리학적 특성이 다르게 나타나며, 수치모의 시 흐름저항응력은 충격파의 전파 속도, 도달 거리 및 접근 수심 등에 영향을 미친다. 본 연구에서는 천수방정식을 SU/PG 기법으로 이산화한 모형을 개발하고 해석해를 이용하여 모형을 검증한 후, 초기수심 및 흐름저항응력에 따른 댐붕괴류의 전파특성을 분석하였다. 바닥마찰력을 적용한 경우 수심은 상대적으로 컸으나 충격파의 도달거리는 짧게 나타났다. Coulomb 응력을 적용한 경우 댐붕괴 후면에서의 유속이 상대적으로 작게 나타났으나, 충격파가 도달하는 영역에서는 바닥마찰력을 적용한 값과 흐름저항응력을 고려하지 않은 값 사이의 유속을 보였다. 또한 초기수심에 관계없이 흐름 저항응력을 고려하지 않은 경우의 불연속면에서의 Fr 수가 1.0에 가장 근사하였다. 초기수심이 얕은 경우 Coulomb 응력에 의한 모의결과가 난류응력을 적용한 경우에 비해 우수한 모의결과를 도출하였으나, 초기수심이 깊어지는 경우 흐름저항항의 영향력이 소멸되므로 반대의 양상이 나타났다.