• Journal of the Korean Geographical Society
• /
• v.37 no.2
• /
• pp.131-142
• /
• 2002

The community and communal folk belief are developed as spatial phenomena. So the communal folk belief express the spatial perception of inhabitants in traditional village. This study analysis the spatial characteristics of communal folk belief in traditional village. The study area is Bangchon village which consists of seven hamlets in Changhung-gun, Chollanam-do. The reset are as follows. First, the seven hamlet\`s location process in Bangchon village has been developed with spatio-temporal variations since Korea dynasty. Second, the communal folk belief in study area can be classified as Ipsok, Byolsinje\`s site, Hojeby\`s site. Third, the spatial characteristics of communal folk belief in study area are indication of each hamlet\`s boundary, indication of entrance and exit of Bangchon visage, indication of central space of Bangchon village in traditional period. Consequently, the spatial distribution of communal for belief are important indicator about spatial structure and spatial perception in traditional village\`s society.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.309-317
• /
• 2002

The mechanical characteristics of Light-Weighted Foam Soil(LWFS) are investigated in this research. LWFS is composed of the dredged soil from offshore, cement and foam to reduce the unit-weight and increase compressive strength. For this purpose, the unconfined compression tests and triaxial compression tests are carried out on the prepared specimens of LWFS with various conditions such as initial water contents, cement contents, curing conditions and confining stresses. The test results of LWFS indicated that the stress-strain relationship and the compressive strength are strongly influenced by the cement contents rather than the intial water contents of the dredged soils. On the other hand, the stress-strain relationship from triaxial compression test has shown strain-softening behavior regardless of curing conditions. The stress-strain behavior for the various confining stress exhibited remarkable change at the boundary where the confining stress approached to the unconfined compression strength of LWFS. In order to obtain the ground improvement of the compressive strength above 200kPa, the required LWFS mixing ratio is found to be 100%~160% of the initial water contents of dredged soil and 6.6% of cement contents.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.9
• /
• pp.29-38
• /
• 2015

In this study, track dynamic interaction characteristics caused by the vehicle running through transitional section such as bridge abutments were studied using the finite element analysis program. The geometric condition of track was generated by trigonometric function and allowable maximum track irregularity is determined by KORAIL track maintenance criteria. The sub-infrastructure under rail fastener system was modelled by 3D solid elements. To reduce computational cost only half track line is numerically considered and the roller boundary condition was applied to each side of model. In this study, the vehicle-track dynamic interaction analysis was carried out for standard Korean transition section of concrete track and the dynamic behaviors were investigated. The dynamic characteristics considered are wheel load variation, vertical acceleration at body, and maximum Mises stress at each part of transitional section.

• Journal of the Korean earth science society
• /
• v.28 no.3
• /
• pp.343-356
• /
• 2007

This paper explored the characteristics of the interannual sea surface temperature (SST) variability in the equatorial Pacific by analyzing the simulated data from a newly coupled general circulation model (CGCM). The CGCM simulates well the realistic ENSO variability as well as the mean climatologies including SST, seasonal cycle, precipitation, and subsurface structures. It is argued that the zonal gradient of SST in the equatorial Pacific is responsible for the over-energetic SST variability near the equatorial western boundary in the model. This variability could also be related to the strong westward propagation of SST anomalies which resulted from the enhanced the zonal advection feedback. The simple two-strip model supports this by sensitivity tests. Analysis of the relationship between zonal mean thermocline depth and NINO3 SST index suggested that the ENSO variability is controlled by the recharge-discharge oscillator of the model. The lead-lag regression result reveals that heat buildup process in the western equatorial Pacific associated with the increase of the barrier layer thickness (BLT) is a precedent condition for El $Ni\widetilde{n}o$ to develop.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.673-678
• /
• 2012

Accurate demand estimating process in the construction of urban railway is very important, and precise validation is required. Existing model formula in the 4 phase model is limited in the estimation of the demand the administrative boundary-based zone system reflects no spatial railway demand characteristics around railway stations. The purpose of this study is improving the accuracy of urban rail demand estimation through segmentations of station influence areas and modal split characteristics within the areas. According to the case analysis, it is possible to set up the ststion influence area with a radius of 500m in the urban region and 1,000m in the suburban. And eastablishing proper segmentations of the ststion influence area shows more accurate results to the real demand of railway stations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.367-375
• /
• 2013

In this study, the characteristics of the heat transfer coefficient and pressure drop were numerically analyzed according to the axis ratio (AR), pitch, location of vortex generator, and bump phase of the tube surface about an elliptical fin-tube heat exchanger. The boundary condition for CFD analysis was decided as a tube surface temperature of 348 K and inlet air velocity of 1-5 m/s. RSM 7th turbulent model was chosen as the numerical analysis for the sensitivity level. The analysis results indicated that the AR and transverse pitch decreased whereas the heat transfer coefficient increased. On the other hand, there was little difference in the longitudinal pitch. Furthermore, the heat transfer rate was more favorable when the vortex generator was located in front of the tube. Also, the bump phase of the tube surface indicated that the pressure drop and heat transfer were more favorable with the circle type than with the serrated type.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.77-83
• /
• 2002

A computational study on the performance prediction of a two-stage axial compressor has been performed. A quasi-steady mixing-plane method is used on the rotor/stator interface to simulate the unsteady interaction phenomena. Detail flow mechanisms, for example, choke, stall, shock/boundary interaction, etc., have been observed and discussed in conjunction with performance characteristics. Calculational data agree reasonably well with the experimental data in terms of the performance characteristics showing the applicability of computational methods to the design validation of multistage axial compressors instead of experimental methods. But it is found that the stall margin of the original compressor was rather small, thus the design modification adopting a simple 1D/2D method has been conducted and its corresponding computations are also carried out. As a result of the redesign process, the stall margin becomes wide enough, but the overall performance is unsatisfactory, therefore, it seems that the redesign of the blades using 3-D methods is needed in the future work.

• Fire Science and Engineering
• /
• v.17 no.2
• /
• pp.62-69
• /
• 2003

The smoke control system in subway platform is not only using for smoke exhaust facility but also using ventilation system. For this reason, smoke vent effectiveness is depending on its position, ventilating volume capacity and the vent method. In this study, the passenger's evacuation time was calculated for the case of fire on sloped subway train vehicle in subway platform. In order to recommend the mechanical smoke exhaust operation mode, SES (Subway Environmental Simulation) was used to predict the airflow of the inlet and outlet tunnel for the subway station. Fire dynamics Simulator(FDS) was used the SES's velocity boundary conditions to calculate the smoke density and temperature under the condition of fire on stopped subway train vehicle at the platform. We compared smoke density and temperature distributions for each 6 types of smoke exhaust systems to clarify the characteristics of smoke and hot air exhaust effectiveness from the result of fire simulation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.442-449
• /
• 2009

An investigation has been made on the relationship between characteristics of torsional mode signal in MsS and SH mode signal in BEM modeling for the defect of stainless steel pipe. In order to compare torsional mode signal with SH mode signal of defect in stainless steel pipe, specimens were made by changing size of depth and width along to circumferential direction 360 degrees. All the defects was detected by torsional mode signal of MsS, especially according to the change of depth size, amplitude of signal was changed. But width change for the circumferential defects has no certain tendency. SH mode signal of BEM modeling shows similar results with torsional mode, with change makes amplitude variation of signal. In this paper, the characteristics of torsional mode and SH mode signals were found. It is possible to predict the circumferential defects for the pipe by SH mode modeling.

• Journal of the Korean Institute of Gas
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2001

The main objective of this study is to determine if the sources of AE in corroded specimens of aluminum could be identified iron the characteristics of the waveform signals recorded during fatigue loading. Coupons of notched 2024-T3 aluminum with or without corrosion (at the notch) were subjected to fatigue loading and the AE signals were recorded using non-resonant, flat, wide-band transducers. The time history and power spectrum of each individual wave signal recorded during fatigue crack growth were examined and classified according to their special characteristics. Five distinct types of signals were observed regardless of specimen condition. The waveform and power spectra were shown to be dependent on specimen condition. During the initial phase of crack growth, the signals obtained in the as-received specimens are most probably due to transgranular cleavage caused by extrusion and intrusion under fatigue loading. In the corroded specimen the signal are probably generated by intergranular cleavage due to embrittlement of grain boundary neat the pitting tip. The need for additional research to further validate these findings is indicated.