• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.256-262
• /
• 1998

Many lubricated systems experience boundary, lubrication condition during operation. However, the friction and wear characteristics of boundary lubrication are not clearly understood. In this work the factors which affect the friction and wear between boundary lubricated metallic surfaces are investigated. Experiments were performed on atuminium, copper, and SM45C with bearing ball using a pin-on disk type tester. The experimental conditions were determined by Taguchi experimental method. From the experimental results, the major factors that influence the friction and wear characteristics of boundary lubrication could be identified.

• Tribology and Lubricants
• /
• v.15 no.3
• /
• pp.248-256
• /
• 1999

Many tribological components in automobile engine undergo high load and sliding speed with thin film thickness. The lubrication characteristics of the components are regarded as ether hydrodynamic lubrication or boundary lubrication, whereas in a working cycle they actually have both characteristics. Many modem engine lubricants have various additives for better performance which make boundary film formation even under hydrodynamic lubrication regime. Conventional Reynolds equation with the viewpoints of continuum mechanics concerns only bulk viscosity of lubricant, which means that its simulation does not give insights on boundary lubrication characteristics. However, many additives of modern engine lubricant provide mixed modes of boundary lubrication characteristics and hydrodynamic lubrication. Especially, high molecular weight polymeric viscosity index improvers form boundary film on the solid surface and cause non-Newtonian fluid effect of shear thinning. This study has performed the investigation about journal bearing system with the mixed concepts of boundary lubrication and hydrodynamic lubrication which happen concurrently in many engine components under the condition of viscosity index improver added.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.160-165
• /
• 1997

Structural boundary condition is very important as a part of a structural system because it determines the dynamic characteristics of the structure. It is often to experience that experimental measurements of structural dynamic characteristics are somewhat different from the analytical predictions in which idealized boundary conditions are usually assumed. However, real structural boundary conditions are not so ideal; not perfectly clamped, for instance. Thus this paper introduces a new method to determine the non-ideal structural boundary conditions in the frequency domain. In this method, structural boundary conditions are modeled by both extensional (vertical) and torsional elastic springs. The effective springs are then determined from experimental FRFs (frequency response functions) by using the spectral element method (SEM). For a cantilevered beam experiments are conducted to determine the real boundary conditions in terms of effective springs. Dynamic characteristics (analytically predicted) based on identified boundary conditions are found to be much closer to experimental measurements when compared with those based on ideal boundary conditions.

• Journal of the Korean housing association
• /
• v.14 no.1
• /
• pp.11-18
• /
• 2003

The purpose of this study is to make clear the identity of Korean traditional housing. And I'm trying to search characteristics of boundary in Korean traditional housing. In this study, I have analyzed boundary of ‘Gwan-gajung’. It is constructed on a square shaped plan, there is an elegant middle court, and a counter-roofed shrine house in the rear of the inner building. In this study, the definition of boundary is made based on what has been perceived as the proper structure, whose characteristics can be described in terms of openness, inside and outside parts and orientation. As a critical factor to spatial qualities, boundary is closely related with the connection and disconnection, background and atmosphere, and inferior and superior relations and hierarchical order from the view of space. The result of study is like followings. The characteristics of boundary in Korean traditional housing is 1. one way direction of penetrability, 2. having the face and the back 3. orientation 4. duplication.

• Korean Institute of Interior Design Journal
• /
• v.27 no.2
• /
• pp.45-54
• /
• 2018

Immersive space is a new type of space, which is converged with other domains and expressed in various ways and here, a mutual exchange between space and participants is realized with active intervention of participants. The purpose of this study is to examine boundary changes and characteristics in virtual space and reality or inside and outside, focusing on immersive space. For this study, a case analysis was conducted, based on the key words regarding flow experience and boundary characteristics in immersive space. The boundary characteristics extracted are as follow. First, while immersive space is overlapped in many different ways, the boundary in space gradually changes and one unique and convergent space is formed. Also, a combination of overlap is made with internal and external physical force and a convergent boundary is created. Second, forms are mixed in diverse ways and an unrealistic boundary space is revealed. For new experience, it has familiar, but new experiential characteristics and also shows an expanded boundary by the medium of different domains. Third, a simultaneous space, based on variability of time and space, has an ambiguous boundary due to a meaningless physical boundary of space and changing into a space region constantly, it becomes an unlimited variable space. Fourth, a linear expansion-based emergent space has nonlinearity, which creates a meaningless boundary, recognized as an irregular, dynamic and transformative space and expands to a creative space. In conclusion, it is anticipated that based on diverse characteristics found in immersive space, this study would give unlimited inspiration to many design fields and art creation activities and contribute to a further development through continued research on immersive space.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.4-4
• /
• 2003

Various Cu films were fabricated using sputtering and electroplating with and without additive, and their surface damages after annealing were investigated. After annealing at 43SoC, the difference between damage morphologies of the films was observed. In some films stress-induced grooves along the grain boundaries were observed, while in the others voids at the grain boundary triple junctions were observed. It was also observed that the stress-induced groove was formed along the high energy grain boundaries. It was found out that the difference of the morphologies of surface damages in Cu films depends on not process type but grain boundary characteristics. To explain the morphological difference of surface damages, a simple parameter considering the contributions of grain structures and grain boundary characteristics to surface and grain boundary diffusions is suggested. The effective grain boundary area, which is a function of grain size, film thickness and the fraction of high energy grain boundaries, played a key role in the morphological difference.

• Journal of computational fluids engineering
• /
• v.14 no.3
• /
• pp.25-32
• /
• 2009

The present paper focuses on the analysis of aero-acoustics characteristic by appling different four boundary conditions. The high-order and high-resolution numerical schemes are used for discrete accurate computation of compressible flow. The four boundary conditions include extrapolation, characteristic boundary condition, zonal characteristic boundary condition. These boundary conditions are applied to the computation of two dimensional circular cylinder flows with Mach number of 0.3 and Reynolds number of 400. The computation results are validated against measurement data and other computation results for the Strouhal frequency of vortex shedding, the mean drag coefficient and root-mean-square lift for the unsteady periodic flow regime. The characteristics of secondary frequency is predicted by three kinds of boundary conditions.

• Korean Institute of Interior Design Journal
• /
• v.18 no.6
• /
• pp.176-183
• /
• 2009

This study was intended to define the spatial concept of the boundary structure of the architectural space as well as evaluate the Hyangdan which well represents the features of Korean traditional building in such a way of reviewing the building structure of Korean traditional residential space. The boundary is categorized into visible boundary and invisible boundary which was also functionally classified into the features of isolating, passing, mediating and overlapping. The major elements comprising the boundary structure was analyzed by the characteristic of the pattern so as to define them as the concept of surrounding, duality, hierarchism, continuity and overlapping. Based on such concepts, a boundary structural characteristics of Hyangdan were reevaluated and outlined as follows. The surrounding feature was seen through the outer side of the structure surrounded, two courtyards and eaves, and a duality showing both the closure of main house and openness of detached house was seen through the characteristics of surrounding structure. And the continuous activities toward the inner room and the empty space to link them in a systematic way and repeatedly aligned rooms reveal the overlapping as continuous and transitional space. And finally, an elevated stylobate demonstrates the hierarchical features of the structure.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.306-311
• /
• 2001

Effect of boundary layer thickness on the flow characteristics around a rectangular prism has been investigated by using a PIV(Particle Image Velocimetry) technique. Three different boundary layers(thick, medium and thin)were generated in the Atmospheric Boundary Layer Wind Tunnel at Pusan National University. The thick boundary layer having 670mm thickness was generated by using spires and roughness elements. The medium thickness of boundary layer$(\delta=270mm)$ was the natural turbulent boundary layer at the test section with fully long developing length(18m). The thin boundary layer with 36.5mm thickness was generated by on a smooth panel elevated 70cm from the wind tunnel floor. The Reynolds number based on the free stream velocity and the height of the model was $7.9{\times}10^3$. The mean velocity vector fields and turbulent kinetic energy distribution were measured and compared. The effect of boundary layer thickness is clearly observed not only in the length of separation bubble but also in the reattachment points. The thinner boundary layer thickness, the higher turbulent kinetic energy peak around the model roof. It is strongly recommended that the height ratio between model and approaching boundary layer thickness should be a major parameter.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.438-444
• /
• 2010

The spray characteristics of jet in crossflow (JICF) to improve the atomization and mixing characteristics of liquid Jet, while minimizing the impact on crossflow, were studied experimentally. By varying the temperature, velocity, pressure of crossflow and the speed, pressure of liquid Jet, the spray boundary (outer boundary, inner boundary) with the change of crossflow and liquid jet momentum ratio (q) were measured and led the experimental formula, compared with the results of previous work. Specifically, when the jet penetration with the shape of injector were measured, in the case of dual orifice Injector, under the influence of front orifice, the jet penetration of back orifice was improved approximately 18% ($L_h$ = 4 mm), compared with single orifice injector.