• 암석학회지
• /
• 제4권2호
• /
• pp.168-177
• /
• 1995

Crystal boundaries in igneous rocks are genetically classified in order to predict the geometric patterns of the boundaries which may aid deciphering the textural code in igneous rocks. Crystal boundaries may be formed by two end-member processes;(1) mechanical and (2) chemical removal of interstitial melt. Mechanical removal of the melt will form displacement impingement boundaries, while chemical removal of the melt will form growth impingement boundaries. The positions of boundaries relative to the material points may be affected by secondary processes such as (1) migration and (2) dissolution. The geometric features of crystal boundaries, suggested in this study, may be useful when studying igneous textures and processes, although it may be impossible to determine the suggested features with the analytical techniques currently avilable.

• Earthquakes and Structures
• /
• 제8권1호
• /
• pp.275-304
• /
• 2015

The objective of this paper is to investigate the validity of transmitting boundaries in dynamic analysis of soil-structure interaction problems. As a case study, the proposed Baghdad metro line is considered. The information about the dimensions and the material properties of the concrete tunnel and surrounding soil were obtained from a previous study. A parametric study is carried out to investigate the effect of several parameters including the peak value of the horizontal component of earthquake displacement records and the frequency of the dynamic load. The computer program (Mod-MIXDYN) is used for the analysis. The numerical results are analyzed for three conditions; finite boundaries (traditional boundaries), infinite boundaries modelled by infinite elements (5-node mapped infinite element) presented by Selvadurai and Karpurapu, 1988), and infinite boundaries modelled by dashpot elements (viscous boundaries). It was found that the transmitting boundary absorbs most of the incident energy. The distinct reflections observed for the "fixed boundaries" disappear by using "transmitted boundaries". This is true for both cases of using viscous boundaries or mapped infinite elements. The type and location of the dynamic load represent two controlling factors in deciding the importance of using infinite boundaries. It was found that the results present significant differences when earthquake is applied as a base motion or a pressure load is applied at the surface ground. The peak value of the vertical displacement at nodes A, B, E and F (located at the tunnel's crown and side walls, and at the surface above the tunnel and at the surface 6.5 m away from tunnel's centre respectively) increases with the frequency of the surface pressure load for both cases 1 and 2 (traditional boundaries and mapped infinite elements respectively) while it decreases for case 3 (viscous boundaries). The modular ratio Ec/Es (modulus of elasticity of the concrete lining to that of the surrounding soil) has a considerable effect on the peak value of the horizontal displacement at node B (on the side wall of the tunnel lining) increase about (17.5) times, for the three cases (1, 2, and 3).

• 한국정보처리학회논문지
• /
• 제7권7호
• /
• pp.2246-2253
• /
• 2000

In this paper, we show that one can enhance the performance of blind segmentation of phoneme boundaries by adopting the knowledge of Korean syllabic structure and the regions of voiced/unvoiced sounds. eh proposed method consists of three processes : the process to extract candidate phoneme boundaries, the process to detect boundaries of voiced/unvoiced sounds, and the process to select final phoneme boundaries. The candidate phoneme boudaries are extracted by clustering method based on similarity between two adjacent clusters. The employed similarity measure in this a process is the ratio of the probability density of adjacent clusters. To detect he boundaries of voiced/unvoiced sounds, we first compute the power density spectrum of speech signal in 0∼400 Hz frequency band. Then the points where this paper density spectrum variation is greater than the threshold are chosen as the boundaries of voiced/unvoiced sounds. The final phoneme boundaries consist of all the candidate phoneme boundaries in voiced region and limited number of candidate phoneme boundaries in unvoiced region. The experimental result showed about 40% decrease of insertion rate compared to the blind segmentation method we adopted.

• 수산해양교육연구
• /
• 제17권3호
• /
• pp.281-292
• /
• 2005

Information on maritime boundaries is essential to manage ocean and fisheries effectively in the era of the UN Convention on the Law of the Sea. With various information regarding to maritime boundaries analysed and reviewed, maritime boundaries are mainly divided into two categories such as international and domestic boundaries and also sub-divided into two aspects such as administrative and other boundaries. After clarification of boundary information, the geographical natures of boundaries, for instance datum, projection, line types, are reviewed. The Geographic Information Systems (GIS) is used for the establishment, management and utilization of boundary information due to its strong function in database, analysis, visualization, etc.

• 한국농촌건축학회논문집
• /
• 제23권2호
• /
• pp.45-54
• /
• 2021

This study aims to establish administrative boundaries by utilizing digitalized old topographical map. Various problems have arisen due to unclear administrative boundaries. For example, there are various problems such as conflict amongst residents to occupy a larger area, unnecessary waste of administrative power, and difficulty in collecting various data for administrative units (farm area, statistical data, spatial analysis, living ara analysis). Therefore, in this study, an experimental study was conducted to establish administrative boundaries by using an old topographical map containing information on villages before administrative reform in 1914. As a result, the boundaries of towns, towns and villages were largely consistent. In order to divide the administrative boundaries based on the legal district boundaries, the administrative boundaries were established by referring to the contents of village introduction and natural boundaries (roads, rivers, mountain ranges, etc.) provided in towns and villages. However, there was a limit in establishing a precise boundary as it was not possible to secure a high-quality digitalized old topographical map.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.98-101
• /
• 1997

The nonuniformity of electrical characteristics of grain boundaries in ZnO varistors wei\ulcorner systematically analyzed. The high nonuniformity exist in barrier voltages and nonlinearity coefficients among different grain boundaries. The barrier voltages have normal distributions, only a few grain boundaries were electrically active, and the grain boundaries can be simply classified into good, bad, and ohmic ones according to the electrical characteristics of grain boundaries. The average barrier voltage is equal to 3.3 V by direct method, but it is only 2.3 V by indirect method. There is a high difference between the barrier voltages by direct and indirect measurement methods. The A1$_2$O$_3$ dopants affect the electrical characteristics of grain boundaries by changing the electron status In grain boundary and intragrain.

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1131-1137
• /
• 2018

The effect of a serrated grain boundary on stress corrosion cracking (SCC) of Alloy 600 was investigated in terms of improvement of SCC resistance. Serrated grain boundaries and straight grain boundaries were obtained by controlled heat treatment. SCC cracks preferentially initiated and grew at grain boundaries normal to the tensile loading axis. Resolved tensile stress normal to the grain boundary was lower in serrated grain boundaries compared to straight grain boundaries. The specimen with serrated grain boundaries showed higher SCC resistance than that with straight grain boundaries due to a lower resolved tensile stress normal to the grain boundary.

• 대한의용생체공학회:의공학회지
• /
• 제17권1호
• /
• pp.109-120
• /
• 1996

Cardiac function is evaluated quantitatively using angiographic images via the analysis of the shape change or the heart wall boundaries. To kin with, boundary defection or ESLV(End Systolic Lert Ventricular) and EDLV(End Diastolic Left Ventricular) is essential for the quantitative analysis of cardiac function. The boundary detection methods proposed in the past were almost semi-automatic. Intervention by a knowledgeable human operator was still required Of con, manual tracing of the boundaries is currently used for subsequent analysis and diagnosis. This method would not cut excessive time, labor, and subjectivity associated with manual intervention by a human operator. EDLV images have noncontiguous and ambiguous edge signal on some boundary regions. In this paper, we propose a new method for automated detection of boundaries in noncontiguous and ambiguous EDLV images. The boundary detection scheme which based on a priori knowledge information is divided into two steps. The first step is to detect the candidate edge points of EDLV using ESLV boundaries. The second step is to correct detected boundaries of EDLV using the LV shape. We developed the algorithm of modifying EDLV boundaries defined adaptive modifier. We experimented the method proposed in this paper and compared our proposed method with the manual method in detecting boundaries of EDLV. In the areas within estimated boundaries of EDLV, the percentage of error was about 1.4%. We verified the useflilness and obtained the satisfying results througll the experiments of the proposed method.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.451-457
• /
• 2000

In many dynamic problems such as foundation vibrations ultrasonic nondestructive evaluation and blasting analysts are confronted with the problem of wave propagation in an infinite or semi-infinite media. In order to simulate this situation by a finite analytical model provisions must be made to absorb the stress waves arriving at the boundary. Absorbing boundaries are mathematical artifacts used to prevent wave reflections at the boundaries of discrete models for infinite media under dynamic loads. An analytical study is carried out to examine the effectiveness of Lysmer-Kuhlemeyer model one of the most widely used absorbing boundaries. Validity of the absorbing boundary conditions suggested by Lymer-Kuhlemeyer is examined by adopting the solution of Ewing et al. to the problem of plane waves from a harmonic normal force on the surface of an elastic half-space. The Ewing's problem is than numerically simulated using the finite element method on a semi-circular mesh with and without absorbing boundaries which are represented by viscous dashpots. The absorption ratios are calculated by comparing the displacements at the absorbing boundaries to those at the free field without absorbing boudaries.

• 응용통계연구
• /
• 제22권6호
• /
• pp.1277-1287
• /
• 2009

For stratifying skewed populations, the Lavall$\acute{e}$e-Hidiroglou(LH) algorithm is often considered to have a take-all stratum with the largest units and some take-some strata with the middle-size and small units. Related to its iterative nature have been reported some numerical difficulties such as the dependency of the ultimate stratum boundaries to a choice of initial boundaries and the slow convergence to locally-optimum boundaries. The geometric stratification has been recently proposed to provide initial boundaries that can avoid such numerical difficulties in implementing the LH algorithm. Since the geometric stratification does not pursuit the optimization but the equalization of the stratum CVs, the corresponding stratum boundaries may not be (near) optimal. This paper revisits these issues concerning convergence and near-optimality of optimal stratification algorithms using artificial numerical examples. We also discuss the formation of the strata and the sample allocation under the optimization process and some aspects related to discontinuity arisen from the finiteness of both population and sample as well.