• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 1998년도 봄 학술대회 발표논문집 디자인 학 연구
• /
• pp.68-69
• /
• 1998

• 한국초등과학교육학회지:초등과학교육
• /
• 제19권2호
• /
• pp.15-27
• /
• 2000

The purpose of this study was to survey the thinking of children, preliminary elementary teachers and elementary teachers in relation to the experiment of candle's combustion in a bottle on the water, to develop some supplementary experiments for the correction of the misconception on this experiment and to propose a new teaching method for this subject-matter The results of this study can be summarized as follows. 1. Most of the answers are related to the simple observation as the extinguishing of candlelight and the water rising in the bottle after a candle's combustion. And it is appeared that all the groups are similarly short of the ability of experimental design to verify the cause and effect. 2. from the results of the developed supplementary experiments, it is concluded that the main cause of the water rising is not the combustion of oxygen, but the expansion of volume and the releasing of air in the bottle in the bottle by heat of candle's combustion. 3. Based on the above results, a new direction for the teaching method of this subject is proposed.

• 한국콘텐츠학회논문지
• /
• 제8권4호
• /
• pp.92-99
• /
• 2008

대부분의 기존 도자기보틀(bottle)은 입구가 상부를 향하고 있어 입구가 외부에 노출되기 때문에 발생하는 문제점을 갖고 있다. 이러한 문제점을 보안하여 이중 내부구조를 갖는 보틀을 제작하였다. 이 보틀은 컵 등에 따라질 내용물을 수용하며 하부에 입구를 갖는 수용부와 수용부와 연결되는 다수개의 구멍을 상부에 가지며 수용부의 둘레에 형성되어 내용물을 저장하는 저장부를 포함하며 수용부의 입구의 끝단이 바닥 표면에 맞닿는 저장부의 하부면 보다 상부에 위치하도록 구성된다. 이 보틀은 입구가 하부 쪽을 향하도록 이중 내부구조로 구성함으로써 이물질 등의 유입을 방지할 뿐만 아니라 알코올 성분의 발산을 억제할 수 있어 알코올 성분을 갖는 제품을 비롯한 내용물의 장기 보관이 가능하다. 또한 연결구멍을 통한 수용부에 의해 한 잔에 해당하는 일정량의 내용물을 컵 등에 항상 따를 수 있다. 따라서 이 연구는 앞서 설명한 바와 같은 종래기술의 문제점을 해결하여 보다 편리하고 실용적인 보틀을 만드는데 그 목적이 있다.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.902-909
• /
• 2009

With various reservoirs, dams and reduction of water velocity in downstream, rivers in Korea often have characteristics of accumulation of pollutants. Therefore, the main focus of water quality modeling in Korea needs to be shifted from DO to algae and organic matter. Moreover the structures of water quality models should be modified to have capability of simulating BOD which is a key factor of total water pollution load management in Korea as laboratory experiment BOD (Bottle $BOD_5$). In the SWAT model which is one of the widely used water quality models in Korea, the channel water quality module is using main algorithm of the QUAL2E model which has limitations in simulating algae, organic matter and Bottle BOD5 etc. To overcome this hindrance, in this study, the improved channel water quality module of the SWAT model (Q-SWAT) was proposed by linking the algorithms of the QUAL-NIER model which was developed based on the QUAL2E model to the SWAT model. The algorithms estimating the increase of internal organic matter by fractionization algal metabolism process and calculating Bottle $BOD_5$ were added and the results of proposed model were compared to those of the original SWAT model. The results of comparison test are showing that more accurate BOD values can be obtained with the Q-SWAT model and it is anticipated that the Q-SWAT model can be used as an effective tool of decision support through the water quality simulation and long term pollution source analysis.

• 한국포장학회지
• /
• 제22권3호
• /
• pp.163-168
• /
• 2016

본 연구에서는 국내 페트병의 경량화 가능성을 파악하기 위해 780종 이상의 빈용기 무게와 표시 용량의 상관관계를 분석하였다. 페트병은 사용목적에 따라 상압병(생수류), 내열병(쥬스류), 내압병(탄산류), 및 장기보관사용병(소스류)으로 구분하였으며 수집된 빈용기 무게와 표시 용량을 기반으로 각 페트병 종류별 경량화 지수(Lightness Index; L)를 산출하였다. 페트병 원천감량 설계 시 이용가능한 권고 기준 및 최적 기준을 경량화 지수를 이용하여 설정하였다. 예로 500 mL 생수병을 감량화 설계 기준에 맞게 생산할 경우 최적기준 반영시 약 4 g의 감량화가 가능하다. 작성된 설계 기준은 이미 관련 업계에 배포되었으며 생수병을 중심으로 적정 기준 정도의 경량화가 이루어지고 있다. 제시된 페트병 설계 기준은 국내외에서 출시된 페트병을 분석하여 무게 분포 특성을 반영한 결과이므로 현재 출시된 제품의 경량화 정도와 향후 개발되는 제품이 시장에서 어느 정도의 원천감량설계인지 알 수 있는 자료로 활용될 수 있을 것이다.

• 로봇학회논문지
• /
• 제14권2호
• /
• pp.81-86
• /
• 2019

Robots are used in various industrial sites, but traditional methods of operating a robot are limited at some kind of tasks. In order for a robot to accomplish a task, it is needed to find and solve accurate formula between a robot and environment and that is complicated work. Accordingly, reinforcement learning of robots is actively studied to overcome this difficulties. This study describes the process and results of learning and solving which applied reinforcement learning. The mission that the robot is going to learn is bottle flipping. Bottle flipping is an activity that involves throwing a plastic bottle in an attempt to land it upright on its bottom. Complexity of movement of liquid in the bottle when it thrown in the air, makes this task difficult to solve in traditional ways. Reinforcement learning process makes it easier. After 3-DOF robotic arm being instructed how to throwing the bottle, the robot find the better motion that make successful with the task. Two reward functions are designed and compared the result of learning. Finite difference method is used to obtain policy gradient. This paper focuses on the process of designing an efficient reward function to improve bottle flipping motion.

• 한국식품과학회지
• /
• 제47권4호
• /
• pp.425-430
• /
• 2015

원료인 생수와 포장 용기인 페트병과 뚜껑에서 야기되는 이취 성분의 존재여부를 MS-전자코를 통하여 분석해 보았다. 이취가 나는 생수는 농도별로 DF2 양의 방향으로 이동하는 것을 확인 할 수 있었고, 이취의 원인이 페트병 혹은 페트병의 뚜껑이라고 가정하여 분석을 진행한 결과 뚜껑에서 휘발 성분이 페트병 보다 많이 검출되는 것으로 나타났다. 이는 물에서 나는 이취가 페트병보다는 뚜껑에 영향을 더 많이 받았을 것이라고 볼 수 있었다. 또한 이온 분획의 결과로 보아 이취의 원인이 되는 물질인 2,4-di-tert-butylphenol, 노난올과 데칸올이 페트병과 뚜껑에 포함되어 있다고 추측되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.85-86
• /
• 2018

In this study, we previously conducted a quick evaluation of cement powder map using mesiline and hydrometer. The experiment also confirmed the possibility of rapid quality evaluation of cement powder. In this study, further studies have been conducted to apply speed and cost more economical than conventional methods, and the possibility of applying this research is to be analyzed. The result of the experiment was 500 mL of a bottled water bottle with a solid edge for measurement convenience, and the hydrometer was determined to be B type. In addition, density values of each other by powder during the same time period are considered to be measurable, indicating large differences.

• The Journal of Advanced Prosthodontics
• /
• 제16권3호
• /
• pp.163-173
• /
• 2024

PURPOSE. This study assessed the effect of storage time on chemical structure of a single-bottle and a two-bottle experimental ceramic primer and micro-shear bond strength (µSBS) of composite to ceramic. MATERIALS AND METHODS. This study was conducted on 60 sintered zirconia and 60 feldspathic porcelain blocks. Half of the specimens (n = 30) were subjected to surface treatment with the single-bottle Clearfil ceramic primer (n = 15) and two-bottle experimental primer (n = 15) after 24 hours. The remaining half received the same surface treatments after 6 months storage in distilled water. Composite cylinders were bonded to the ceramics, and they were then subjected to µSBS test. Also, the primers underwent Fourier-transform infrared spectroscopy (FTIR) after 24 hours and 6 months to assess their chemical structure. Data were analyzed with 3-way ANOVA and adjusted Bonferroni test (alpha = 0.05). RESULTS. The µSBS of both ceramics significantly decreased at 6 months in one-bottle ceramic primer group (P = .001), but it was not significantly different from the two-bottle experimental primer group (P = .635). FTIR showed hydrolysis of single-bottle primer, cleavage of silane and 10-MDP bonds, and formation of siloxane bonds after 6 months. CONCLUSION. Six months of storage caused significant degradation of single-bottle ceramic primer, and consequently had an adverse effect on µSBS.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.275-281
• /
• 2009

Porous materials were manufactured by hydrothermal treatment of waste bottle glass without foam agent. Factorial design was applied to analyze data by statistical methods and deal with the important factors for a process. The largest effect for porosity was for temperature of hydrothermal treatment. Amount of water and temperature-water interaction appeared to have little effect. The particle size of raw material was also identified as a major factor by one-way ANOVA and the porosity decreased as the size increased. The sintering temperature was not statistically significant for the porosity but was significant for the pore size. The porous material had compressive strength and thermal conductivity comparing with those of ALC (autoclaved lightweight concrete), although it has higher porosity than for ALC.