• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.2
• /
• pp.99-103
• /
• 1988

With a purpose of finding out the effects of magnesium and boron enriched organic-compound fertilizer application on qualities of grasses on the hilly pasture, a field experiment was arranged with five different treatments as a randomized block design and lasted from September, 1984 to the end of growing season in 1986. The results obtained are summarized as follows: 1. Mean chemical components except NFE of grasses at the plots with organic-compound fertilizer application were appeared to contain slightly high comparing to single dressing. 2. Production of DCP with organic-compound fertilizer (1,170.2 kg/ha) was significanty increased by 20% comparing to single dressing (975.7 kg/ha) in the conventional fertilization level (p<0.05), but it was not significantly different between them in the low dressing level. 3. Production of energies (TDN, StE and NEL) with organic-compound fertilizer of low and conventional dressing level were appeared to increase by 10 and 13 to 15% than those of single dressing of the same levels, respectively. But it was not significant difference. 4. Like single dressing nutrient productions with organic-compound fertilizer were appeared significantly high due to increasing of dressing gradually (P<0.05-0.01) 5. Mineral contents of P and Mg at the plots with organic-compound fertilizer were a little higher, on the other hand, K, C/P and K/Ca + Mg equivalent ratio were slightly lower than those of single dressing, but the content of Ca tended to similar between them.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05a
• /
• pp.60-65
• /
• 2004

The possibility of mechano-chemical synthesis and influence of mechanical activation on thermal synthesis of borides and boron carbides of mass-low metals is investigated. The opportunity of mechanochemical synthesis in the mill AGO-2 of such compounds as Al $B_2$and Ca $C_2$ $B_2$is established. Influence of mechanical activation in the mill SPEX 8000 on synthesis of such compound as $Mg_{0.5}$A $l_{0.5}$ $B_2$is shown. Features of synthesis in systems containing metal magnesium are considered.d.d.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.99-103
• /
• 1988

With a purpose of finding out the effects of magnesium and boron enriched organic-compound fertilizer application on qualities of grasses on the hilly pasture, a field experiment was arranged with five dilferent treatments as a randomized block design and lasted from September, 1984 to the end of growing season in 1986. The results obtained are summarized as follows: 1. Mean chemical components except NFE of grasses at the plots with organic-compound fertilizer application were appeared to contain slightly high comparing to single dressing. 2. Production of DCP with organic-compound fertilizer (1,170.2 kg/ha) was significanty increased by 20% comparing to single dressing (975.7 kg/ha) in the conventional fertilization level (P<0.05), but it was not significantly different between them in the low dressing level. 3. Production of energies (TDN, StE and NEL) with organiccompound fertilizer of low and conventional dressing level were appeared to increase by 10 and 13 to 15% than those of single dressing of the same levels, respectively. But it was not significant difference. 4. Like single dressing nutrient productions with organic-compound fertilizer were appeared significantly high due to increasing of dressing gradually (P<0.05-0.01). 5. Mineral contents of P and Mg at the plots with organic-compound fertilizer were a little higher, on the other hand, K, C/P and K/Ca + Mg equivalent ratio were slightly lower than those of single dressing, but the content of Ca tended to similar between them.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.3
• /
• pp.169-178
• /
• 2003

This pot experiment was conducted to find out the effects of boron application($B_{0}$ ; control, $B_1$; 0.2, $B_2$; 2.0, B$_3$; 6.0, $B_4$; 15.0 boron me/pot) on the forage performance of pure and mixed cultures of orchardgrass and white clover. The third part was concerned with the changes in the contents and yields of nitrogen compounds(crude/pure protein and soluble N-compound) in forages. The results obtained are summarized as follows: 1. With no additional fertilization, especially nitrogen, in a pure culture, the $B_{0}$ and $B_4$ treatments on white clover decreased the amount of crude/pure protein, and showed nitrogen deficiency symptoms. However, the optimum boron application($B_2$) positively resulted in the increase of crude and pure protein, especially pure protein, and the content ratio of pure protein/soluble N-compounds. With additional fertilization, especially nitrogen, differences were not found among the boron treatments($B_{0}$, $B_2$, and $B_4$). 2. Owing to the decline of white clover as affected by the additional fertilization, especially nitrogen, in the grass-clover mixed cultures, the effects of B-application on these contents of white clover were different and relatively low, compared with the pure cultures. But the positive effect of $B_2$ treatment tended to be similar to the pure cultures. Also, it was recognized that the $B_2$ treatment resulted in the increase of their contents in orchardgrass, however, the effect was relatively minor compared with that of white clover. 3. The optimum B application(B$_2$) on white clover influenced relatively better on the yields of crude and pure protein than on the dry matter yields, especially with no additional fertilization. The effects of boron application on the contents and yields of crude and pure protein were different according to the forage species, whether it was a pure or mixed culture, and additional fertilization.

• Korean Journal of Materials Research
• /
• v.17 no.3
• /
• pp.179-183
• /
• 2007

A plate heat exchanger (PHE) normally uses vacuum brazing technology for connecting plates and fins. However, the reliability of high temperature brazing, especially with nickel-based filler metals containing boron the formation of brittle intermetallic compounds (IMCs) in brazed joints is of major concern. since they considerably degrade the mechanical properties. This research was examined the vacuum brazing of commercially SUS304 stainless steel with BNi-2 (Ni-Cr-B-Si) filler metal, and discussed to determine the influence of brazing temperatures on the microstructure and mechanical strength of brazed joints. In the metallographic analysis it is observed that considerable large area of Cr-B intermetallic compound phases at the brazing layer and the brazing tensile strength is related to removal of this brittle phase greatly. The mechanical properties of brazing layer could be stabilized through increasing the brazing temperature over $100^{\circ}C$ more than melting temperature of filler metals, and diffusing enough the brittle intermetallic compound formed in the brazing layer to the base metal.

• Korean Journal of Soil Science and Fertilizer
• /
• v.13 no.4
• /
• pp.107-113
• /
• 1981

In order to investigate effects of fertilization on the yield of chestnut trees and to compare the compound fertilizer (CF) and Boron contained compound fertilizers (BCF) for chestnut trees developed by Chosun Fertilizer Inc. with single fertilizers (SF) at different fertilizing levels, a field experiment was conducted during the 1979 and 1980 growing periods. The results were summarized as follows: 1. The growth of chestnut trees was markedly improved as increasing the amount of fertilizers regardless of the SF, CF or BCF. 2. The number of strobiles increased as increased amount of fertilizers, and the ratio of dropped strobiles decreased by more than 90 percent by the BCF application while that decreased by 12 to 47 percents by the SF or CF applications. It implies that the boron application be necessary for increasing strobiles and reducing the ratio of dropped strobiles. 3. The yield increments by the SF or CF applications at the standard level were 80 percent and that by the BCF application at the same level was 202 percent and the highest yield increment was recorded as high as 302 percent by the BCF application at the doubled level in 1979. The yield response in 1980 was similar to that in 1979; however, the yields were lower than in 1979 due to the abnormal weather conditions such as low temperature and low solar radiation during summer except BCF applicated treatments where the yields were outstandingly increased. 4. The BCF developed proved as a recommendable compound fertilizer for chestnut trees.

• Analytical Science and Technology
• /
• v.15 no.6
• /
• pp.550-555
• /
• 2002

The oxidation mechanism of boratabenzene was studied. As a model compound the ferrocene analogue (${\eta}^6$-1-Methylboratabenzene)(${\eta}^5$-Pentamethylcyclopentadiennyl)iron 3 was chosen. The complex underwent irreversible oxidation in the presence of ortho proton on the ring and a methyl group on the boron atom in methanol medium. Chemical oxidations with $Hg(OAc)_2$, $HgSO_4$, $Cu(OH)_2$, $AgCF_3SO_3$ or $FeCl_3$ in MeOH gave, via a transition state [3], at first the derivates 6 and 7, which were converted to each 8 and 9.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.11
• /
• pp.1342-1349
• /
• 1988

The dependence of the etch rates of differently doped poly-Si films on the gas composition, the chamber pressure and the RF power was investigated in detail. The highest anisotropy and the lowest CD loss were achieved at the $SF_6$-rich compositions, i.e., $Cl_2:SF_6$=17:33 (SCCM), in the $POCl_3$-doped poly-Si. The etch rates increased for n-type dopant (phosphorus), while decreased for p-type (boron) with increasing the doping levels irrespective of plasma parameters. And from the results of the activation of doped poly-Si films the active carrier concentrations as well as the doping concentrations were found to be responsible for the increase of the etch rate of the phosphorus-doped poly-Si.

• Fire Science and Engineering
• /
• v.32 no.2
• /
• pp.1-6
• /
• 2018

The combustion characteristics of cypress wood coated with boric acid (BA) and ammonium pentaborate (APB) were examined using a cone calorimeter according to the ISO 5660-1 standard. As a result, the combined specimens of boric acid and ammonium pentaborate (BA/APB) led to an improved fire performance index due to their synergistic effect. In addition, the total heat release values of the specimen coated with the boron compounds were 6.1~14.1% lower than that of the base specimen. The total smoke release rate (TSR) of the specimens coated with the boron compound decreased throughout the combustion process, except for BA/APB. The maximum concentration of carbon monoxide was reduced by 15.8~25.5%. In general, wood treated with flame retardants has a lower fire hazard.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.630-630
• /
• 2013

Recently, atomically smooth hexagonal boron nitride(h-BN) known as a white graphene has drawn great attention since the discovery of graphene. h-BN is a III-V compound and has a honeycomb structure very similar to graphene with smaller lattice mismatch. Because of strong covalent sp2bonds like graphene, h-BN provides a high thermal conductivity and mechanical strength as well as chemical stability of h-BN superior to graphene. While graphene has a high electrical conductivity, h-BN has a highly dielectric property as an insulator with optical band gap up to 6eV. Similar to the graphene, h-BN can be applied to a variety of field, such as gate dielectric layers/substrate, ultraviolet emitter, transparent membrane, and protective coatings. However, up until recently, obtaining and controlling good quality monolayer h-BN layers have been too difficult and challenging. In this work, we investigate the controlled synthesis of h-BN layers according to the growth condition, time, temperature, and gas partial pressure. h-BN is obtained by using chemical vapor deposition on Cu foil with ammonia borane (BH3NH3) as a source for h-BN. Scanning Transmission Electron Microscopy (STEM, JEOL-JEM-ARM200F) is used for imaging and structural analysis of h-BN layer. Sample's surface morphology is characterized by Field emission scanning electron microscopy (SEM, JEOL JSM-7100F). h-BN is analyzed by Raman spectroscopy (HORIBA, ARAMIS) and its topographic variations by Atomic force microscopy (AFM, Park Systems XE-100).