• Korean Journal of Materials Research
• /
• v.11 no.12
• /
• pp.1074-1079
• /
• 2001

To study the distribution of boron and the boron effect for nucleation of graphite in high carbon steel, neutron induced autoradiography method is used. High carbon steel is easy to make the graphitization by addition of boron. It is easy to analysis of boron distribution using neutron radiography with neutron fluence of $1.9$\times${\times}10^{13}/cm^2$in the boron added high carbon steel. By the neutron induced autoradiography technique, it was found that the distribution of boron depended on boron content, graphitiging temperature and time. And by the analysis of secondary ion mass spectroscopy (SIMS) and electron probe micro analysis (EPMA), boron or boride were acted at nucleation site of graphite in high carbon steel.

• Journal of the Korean Magnetic Resonance Society
• /
• v.3 no.2
• /
• pp.90-99
• /
• 1999

Doping of boron atoms in graphite has been well known method to increase the discharge capacity as the negative electrode material for lithium secondary battery. Herein, the boron-doped graphites are prepared by mixing 1, 2.5, 5, and 7 wt. % of boron carbide in carbon during the graphitizing process. The structural states of boron in boron-doped graphites are investigated by solid-state 11B NMR spectroscopy. The resonance lines for substitutional boron atoms are identified as the second order quadrupolar powder pattern with the quardrupole coupling constant, QCC = 3.36(2) MHz. The quantitative analysis of 11B NMR spectra with boron-doped graphite has also been performed via simulation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.1 no.1
• /
• pp.33-35
• /
• 1972

The curcumin method was adopted in this research for quantitative analysis of boron in plants. An experiment if this method is suitable to present conditions of our laboratory led us to the following conclusions. 1. In making ashes the addition of 0.5ml saturated $Ba(OH)_2$ solution to boron $1{\gamma}$. could completely prevent it from volatilizing. 2. The soft glass ware made in Korea was unfit for this experiment because of the differences in quality. The polyethylene cup was desirable for the quantitative analysis of boron.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.180-183
• /
• 2002

The new useful method for the direct determination of trace boron in iron matrix was studied by applying the precipitation of $Fe(OH)_3$ and ICP-AES. Optimum pH range was 11 ~ 12.5. Linear concentration range of boron was $0.01{\sim}1.0{\mu}g/m{\ell}$ in $5000 {\mu}g/m{\ell}$ solution as iron.

• Nuclear Engineering and Technology
• /
• v.52 no.3
• /
• pp.538-543
• /
• 2020

Boric acid is used as a coolant for pressurized-water reactors, and the degree of burnup is controlled by the concentration of boric acid. Therefore, accurate measurement of the concentration of boric acid is an important factor in reactor safety. An improved system was proposed for the accurate determination of boron concentration. A new boron-concentration measurement technique, called multisensitive detection, was developed to improve the measurement accuracy of boron meters. In previous studies, laboratory-scale experiments were performed based on different sensitivity detectors, confirming a 65% better accuracy than conventional single-detector boron meters. Based on these experimental results, an experimental system simulating the coolant-circulation environment in the reactor was constructed; accuracy analysis of the boron meter with a multisensitivity detector was performed at the actual coolant pressure and temperature. In this study, the boron concentration conversion equation was derived from the calibration test, and the accuracy of the boron concentration conversion equation was examined through a repeatability test. Through the experiment, it was confirmed that the accuracy was up to 87.5% higher than the conventional single-detector boron meter.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2581-2584
• /
• 2020

Boron has been considered to play a nutritionally important role in humans and animals, but its biochemical functions are not clearly understood. Though there are signs that boron affects the mineral and hormone metabolisms, there is no comprehensive epidemiological evidence establishing a relationship between a boron intake and osteoporosis due to the excretion of calcium in the bones. In this study, we investigated the influence of boron intake on the calcium excretion of old female mice in the menopause. The concentrations of calcium in backbone, thigh bone, blood, kidney, liver, and spleen were investigated by using instrumental neutron activation analysis.

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.236-241
• /
• 2005

The purpose of this study is to find out the source(s) and distribution of boron in Nak-dong River. In the year of 2002, the boron has been adopted as a toxic constituent for Korean drinking water standard. In this study, the analytical samples were collected at 11 stations in March, June, September and December 2002. These samples were analyzed by inductively coupled plasma-mass (ICP-MS) method. The recovery, relative standard deviation and method detection limit of the ICP-MS method for boron was $89{\sim}111.3%$, $2.21{\sim}3.81%$ and $5{\mu}g/L$, respectively. The distribution of boron was ranged $65{\sim}155{\mu}g/L$ in March, $26{\sim}125{\mu}g/L$ in June, $22{\sim}140{\mu}g/L$ in September and $50{\sim}162{\mu}g/L$ in December. The higher levels of boron were found at Kum-ho river nearby the industrial complex, which seemed to be greatly affected by domestic sewages and wastewater from the upper streams. Thus, the concentration of boron and that of other components showed strong statistical correlation in this area. In the Nak-dong River, industrial wastewater and domestic sewages is thought to be the sources of boron.

• Korean Journal of Materials Research
• /
• v.23 no.10
• /
• pp.555-561
• /
• 2013

The hardenability of low-carbon boron steels with different molybdenum and chromium contents was investigated using dilatometry, microstructural observations and secondary ion mass spectroscopy (SIMS), and then discussed in terms of the segregation and precipitation behaviors of boron. The hardenability was quantitatively evaluated by a critical cooling rate obtained from the hardness distribution plotted as a function of cooling rate. It was found that the molybdenum addition was more effective than the chromium addition to increase the hardenability of boron steels, in contrast to boron-free steels. The addition of 0.2 wt.% molybdenum completely suppressed the formation of eutectoid ferrite, even at the slow cooling rate of $0.2^{\circ}C/s$, while the addition of 0.5 wt.% chromium did this at cooling rates above $3^{\circ}C/s$. The SIMS analysis results to observe the boron distribution at the austenite grain boundaries confirmed that the addition of 0.2 wt.% molybdenum effectively increased the hardenability of boron steels, as the boron atoms were significantly segregated to the austenite grain boundaries without the precipitation of borocarbide, thus retarding the austenite-to-ferrite transformation compared to the addition of 0.5 wt.% chromium. On the other hand, the synergistic effect of molybdenum and boron on the hardenability of boron steels could be explained from thermodynamic and kinetic perspectives.

• Journal of Plant Biology
• /
• v.22 no.1_2
• /
• pp.21-27
• /
• 1979

Sandy loam plots of pH 5.5, which was created by the reclamation of highlands in Yongin county, Kyeonggi province, was selected for the present experimental study. Sugar beet was cultured in these plots by treating them with calcium hydroxide and 3 replications to maintain pH 5.5, 6.4, 6.8, 7.2, and 7.6, respectively. The growth and yield of sugar beet were investigated and the results obtained showed a great deal of boron deficiency. The growth in its early stage was favorable in high pH plots, while no significant difference was observed in sugar content, root weight and sugar production at the time of harvest in each treated plot. The tendency of sugar accumulation appeared to be identical in terms of pattern in each treated plot; i.e. sugar was accumulated until early September but declined momentarily from the middle of September and then the sugar accumulation was resumed from the middle of October. The number of individuals in boron deficiency was larger in high pH plots and the condition of such boron deficiency was also severe. The result of analysis of boron contained in plant body revealed that the boron content of individuals caused boron deficiency by water culture and that occurred in the plots was small alike. The appearance of boron deficiency is characterized by the emergence of black stripes on the surface of the basal part of petiole, severe necrosis of young leaves in the area of growing point and severe wrinkles. Therefore it is felt necessary to pay particular attention to boron deficiency in the culture of sugar beet in our country.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.352-356
• /
• 2014

Various studies have been done to improve the properties of the steel by adding boron to the steel. Some studies have reported on the analysis of the boron in steel by AAS (atomic absorption spectrometry), ICP-OES(inductively coupled plasma-optical emission spectrometry), ICP-MS (inductively coupled plasma/mass spectrometry). The volatile loss of boron of steel in sample digestion and the separation procedure for avoiding matrix effect by high concentration of iron are difficulties for determination of boron in steel. The method to determine boron in steel by ICP-MS was developed without volatilization of boron in sample digestion step with $HNO_3-NH_4HF_2$ digestion method, and the additional separation process for avoiding matrix effect. Complete decomposition of steel with $HNO_3-NH_4HF_2$ digestion method, and boron determination by ICP-MS in the matrix of high concentration of iron were possible. Quantitative recoveries of boron in certified standard steel by new method in this study were 103 to 111%, and the relative standard deviation is less than 5%. The method detection limit was $1.17{\mu}g/g$.