• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.2
• /
• pp.305-312
• /
• 1998

Normal tensile strength in collagen fibrils is due to intermolecular and intramolecular crosslinks which are known to be altered in aging. Pyridinoline, a mature crosslink which is stable and nonreducible, is derived from two hydroxyallysine and one hydroxylysine residues of collagen fibrils. The excess formation of pyridinoline in collagen is associated with making the tissue stiffer, less soluble and less digestible by enzymes. Lysyl oxidase is the enzyme that initiates the biosynthesis or crosslinks in collagen by catalyzing the oxidative deamination of the lysyl and hydroxylysyl residues in these molecules, and its activity is inhibited by $\beta$-aminopropionitrile(BAPN). Our previous work demonstrated that the pyridinoline content of bone collagen significantly was increased during incubation for 5 weeks at 37$^{\circ}C$ invitro, but it was diecrased by the addition of ascorbic acdi(AsA). In this study, we clarified the specific action of AsA in aging process in vitro enzymatic reaction.

• Journal of the Korean Ceramic Society
• /
• v.20 no.1
• /
• pp.55-62
• /
• 1983

the preliminary work on the prepartion of fine hydroxyapatite powder and the synthesis of dense hydroxyapatite ceramic from the powder were investigated for the development of artificial bone and tooth materials for implants. The effects of the process variables such as compositions of the raw materials the initial pH of the solutions and sintering temperature on the physical properties were investigated in order to determine the optimum conditions for the fabrication of tooth implant material. As the initial pH of the solutions was increased in the range of 10-11.6 the initial particle size of precipitates was decreased thus the sinterability of precipitates was improved. It was found that the composition of calcium rich of 1.75 in Ca/P mole ratio exhibited better sinterability and mechanical strength of the apatite ceramics for example the highest value of Vicker's hardness obtained from the compositions of 1.75 in Ca/P mole ratio was 764±30 Kg/mm2 compared to the maximum value of 600 kg/mm2 obtained from the compositions of 1.67 in Ca/P mole ratio.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.1
• /
• pp.89-102
• /
• 2019

Collagen can be used in building artificial skin replacements for treatment of burns and towards the reconstruction of bone as well as researching cell behavior and cellular interaction. The strength of collagen in connective tissue rests on the characteristics of collagen fibers. 3D confocal imaging of collagen fibers enables the characterization of their spatial distribution as related to their function. However, the image stacks acquired with confocal laser-scanning microscope does not clearly show the collagen architecture in 3D. Therefore, we developed a new method to reconstruct, visualize and characterize collagen fibers from fluorescence confocal images. First, we exploit the tensor voting framework to extract sparse reliable information about collagen structure in a 3D image and therefore denoise and filter the acquired image stack. We then propose to segment the collagen fibers by defining an energy term based on the Hessian matrix. This energy term is minimized by a min cut-max flow algorithm that allows adaptive regularization. We demonstrate the efficacy of our methods by visualizing reconstructed collagen from specific 3D image stack.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.48 no.1
• /
• pp.1-12
• /
• 2024

Silk sericin, a natural protein from silkworm cocoons, is emerging as a multifunctional biomaterial in biomedicine, particularly in tissue engineering and wound healing. Recent studies have highlighted its biocompatibility, biodegradability, and potential for chemical modification, which allows it to be incorporated into various scaffold architectures. This review article synthesizes current research, including the development of sericin-based hydrogel scaffolds for tissue engineering and sericin's role in enhancing wound healing. Key findings demonstrate sericin's ability to refine scaffold porosity and mechanical strength, expedite tissue healing, and reduce bacterial load in wounds. The integration of sericin into novel bioactive dressings and its use in peripheral nerve injury repair are also discussed, showcasing its adaptability and efficacy. The convergence of these studies illustrates the broad applications of sericin, from scaffold design to clinical interventions, making it a promising material in regenerative medicine and tissue engineering, with the potential to improve patient outcomes significantly.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.227-233
• /
• 2003

Two experiments were conducted to evaluate the effects of chromium (Cr) on the growth performance, bone trait, serum traits, and immune responses in broilers. The broilers were fed corn-soybean meal basal diet supplemented with Cr at level of 0(control), 200, 400, or 800 ppb in the form of chromium picolinate (CrPic). The broilers were fed treated diets for 6 weeks in Exp. 1, but the Cr supplement was removed for the last 3 weeks in Exp. 2. Exp. 1 showed that dietary supplement of Cr did not affect growth performance of the broiler, though improved feed efficiency (p<0.05) was observed during 0 to 3 weeks. Moreover, serum total (p<0.05) and HDL cholesterols (p<0.06) were significantly higher in pooled Cr added group at 6 weeks of age, however, the difference was not significant in Exp. 2. The pooled Cr added group in Exp.1 had significantly lower (p<0.05) alkaline phosphatase activity and higher (p<0.09) calcium at 3 weeks. Significantly lower phosphorus was also observed in Exp. 2. With continued supplement of Cr as in Exp. 1, the alkaline phosphatase activity maintained higher at 6 weeks, as opposed to significantly lower in Exp. 2, which had no further Cr supplement. Higher bone breaking strength was observed in 400 ppb Cr supplemented in Exp. 1, though not significantly different. Serum glucose and triglyceride were not affected by Cr supplement. Antibody against Infectious Bronchitis (IB) was significantly (p<0.05) higher with 400 ppb Cr supplemented, and anti-Newcastle disease (ND) antibody also tended to be higher (p<0.06) in pooled Cr added group at 6 weeks of age in Exp. 1. Peripheral blood blastogenesis activity was not different among the treatments. The results suggest that diet supplemented with 400 ppb CrPic may be beneficial to the broiler.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.1
• /
• pp.73-78
• /
• 2018

PURPOSE. The purpose of this study was to analyze the effects of two different implant surface treatments on initial bone connection by comparing the Removal Torque Values (RTQs) at 7 and 10 days after chemically modified, sandblasted, large-grit and acid-etched (modSLA), and Laser-etched (LE) Ti implant placements. MATERIALS AND METHODS. Twenty modSLA and 20 LE implants were installed on the left and right tibias of 20 adult rabbits. RTQs were measured after 7 and 10 days in 10 rabbits each. Scanning electron microscope (SEM) photographs of the two implants were observed by using Quanta FEG 650 from the FEI company (Hillsboro, OR, USA). Analyses of surface elements and components were conducted using energy dispersive spectroscopy (EDS, Horiba, Kyoto, Japan). RESULTS. The mean RTQs were $12.29{\pm}0.830$ and $12.19{\pm}0.713$ Ncm after 7 days (P=.928) and $16.47{\pm}1.324$ and $16.17{\pm}1.165$ Ncm after 10 days (P=.867) for LE and modSLA, respectively, indicating no significant inter-group differences. Pore sizes in the LE were $40{\mu}m$ and consisted of numerous small pores, whereas pore sizes in the modSLA were $5{\mu}m$. In the EDS analysis, Ti, O, and C were the only three elements found in the LE surfaces. Na, Ca, Cl, and K were also observed in modSLA, in addition to Ti, O, and C. CONCLUSION. The implants showed no significant difference in biomechanical bond strength to bone in early-stage osseointegration. LE implant can be considered an excellent surface treatment method in addition to the modSLA implant and can be applied to the early loading of the prosthesis clinically.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1229-1235
• /
• 2015

Scaffold fabrication technology using a 3D printer was developed for damaged bone tissue regeneration. A scaffold for bone tissue regeneration application should be biocompatible, biodegradable, and have an adequate mechanical strength. Moreover, the scaffold should have pores of satisfactory quantity and interconnection. In this study, we used the polymer deposition system (PDS) based on fused deposition modeling (FDM) to fabricate a 3D scaffold. The materials used were polycaprolactone (PCL) and alginic acid sodium salt (sodium alginate, SA). The salt-leaching method was used to fabricate dual pores on the 3D scaffold. The 3D scaffold with dual pores was observed using SEM-EDS (scanning electron microscope-energy dispersive spectroscopy) and evaluated through in-vitro tests using MG63 cells.

• Journal of the Korea Concrete Institute
• /
• v.23 no.4
• /
• pp.461-469
• /
• 2011

In this study, the effect of polyvinyl alcohol (PVA) fiber volume fraction on the pullout behavior of structural synthetic fiber in hybrid structural synthetic fiber and PVA fiber cement composites are presented. Pullout behavior of the hybrid fiber cement composites and structural synthetic fiber were determined by dog-bone bond tests. Test results found that the addition of PVA fiber can effectively enhance the structural synthetic fiber cement based composites pullout behavior, especially in fiber interface toughness. Pullout test results of the structural synthetic fiber showed the interface toughness between structural synthetic fiber and PVA fiber reinforced cement composites increases with the volume fraction of PVA fiber. The microstructural observation confirms the incorporation of PVA fiber can effectively enhance the interface toughness mechanism of structural synthetic fiber and PVA fiber reinforced cement composites.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.77-81
• /
• 2008

The goal of rotator cuff repairs is to achieve high initial fixation strength, minimize gap formation, maintain mechanical stability under cyclic loading and optimize the biology of the tendon-bone interface until the cuff heals biologically to the bone. Single row repairs are least successful in restoring the footprint of the rotator cuff and are most susceptible to gap formation. Double row repairs have an improved load to failure and minimal gap formation. Transosseous equivalent repairs (suture bridge technique) have the highest ultimate load and resistance to shear and rotational forces and the lowest gap formation. Even though the superior advantages of double row and transosseous equivalent repairs, those techniques take longer surgical time and are more expensive than single row repairs. Therefore single row repairs can be useful in bursal side partial thickness or small size full thickess rotator cuff tear.

• Korean Journal of Materials Research
• /
• v.24 no.6
• /
• pp.310-318
• /
• 2014

In this experiment, a highly porous scaffold of biphasic calcium phosphate (BCP) was prepared using the spongereplica method. The BCP scaffold was coated with 58S bioactive glass (BG) and sintered for a second time. The resulting scaffold was coated with gelatin (Gel) and cross-linked with [3-(3-dimethyl aminopropyl) carbodiimide] and N-Hydroxysuccinamide (EDC-NHS). The initial average pore size of the scaffold ranged from 300 to $700{\mu}m$, with more than 85 % porosity. The coating of BG and Gel had a significant effect on the scaffold-pore size, decreasing scaffold porosity while increasing mechanical strength. The material and surface properties were evaluated by means of several experiments involving scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) and X-ray diffraction (XRD). Cytotoxicity was evaluated using MTT assay and confocal imaging of MC3T3-E1 pre-osteoblast cells cultured in vitro. Three types of scaffold (BCP, BCP-BG and BCP-BG-Gel) were implanted in a rat skull for in vivo evaluation. After 8 weeks of implantation, bone regeneration occurred in all three types of sample. Interestingly, regeneration was found to be greater (geometrically and physiologically) for neat BCP scaffolds than for two other kinds of composite scaffolds. However, the other two types of scaffolds were still better than the control (i.e., defect without treatment).