• 동의생리병리학회지
• /
• 제16권4호
• /
• pp.788-800
• /
• 2002

Aging is characterized by an age-dependent reduction in bone density. Pronounced bone loss by postmenopausal estrogen deficiency induces a bad effect on dynamic balance of bone metabolism. When the bone density is reduced to the level below the fracture threshold, the risk for fracture is greatly increased. The purpose of this study is to examine what are the effects of the Yuklinzu(YLZ: 毓麟珠) on the ovariectomized rat model of postmenopausal osteoporosis. The results of the experiment are as follows: Body weight in control group showed significant increase in comparison with sham, but that in YLZ-treated showed no change in comparison with control. The level of serum albumin in control group showed significant decrease in comparison with sham. That in YLZ-treated was slightly decreased in comparison with control. The level of serum ALP activity in control group showed significant increase in comparison with sham, but that in YLZ-treated was significantly decreased in comparison with control. The level of serum phosphorous in control group showed significant increase in comparison with sham, but that in YLZ-treated showed no change in comparison with control. The level of serum calcium in control group showed no change in comparison with sham, but that in YLZ-treated was significantly decreased in comparison with control. The level of serum GOT in control group showed no change in comparison with sham, but that in YLZ-treated was significantly decreased in comparison with control. The level of serum GPT did not significant change among the three groups. The level of serum estrogen in control group showed slightly increased in comparison with sham, but that in YLZ-treated showed no change in comparison with control. The level of serum T3 in control group showed no change in comparison with sham, and that in YLZ-treated showed no change in comparison with control. The level of serum T4 in control group showed significant increase in comparison with sham, but that in YLZ-treated was significantly decreased in comparison with control. Mechanical strength of the femur neck in control group showed significant decrease in comparison with sham. That in YLZ-treated showed slightly increased in comparison with control. Trabecular bone area as well as trabecular thickness in control group showed significant decrease in comparison with sham. Those in YLZ-treated showed significant increase in comparison with control. Trabecular number and did not significant change among the three groups. Trabecular separation only in YLZ-treated showed significant decrease in comparison with control. Osteoclast number and oseoblast surface in control group showed significant increase in comparison with sham. Those in YLZ-treated showed slightly decreased in comparison with control. According to the above these results, YLZ has shown to be capable of preventing and curing osteoporosis caused by old-aged and postmenopause.

• 대한방사선기술학회지:방사선기술과학
• /
• 제35권4호
• /
• pp.321-326
• /
• 2012

병원에서 정형보철용 재료로 사용하는 스테인리스와 티타늄 금속을 같은 크기로 제작하여 자기공명영상에 미치는 영상학적 진단가치를 비교하였다. 영상의중심(Center), 영상이외부분(Background), 고 신호부분(High band)에 대한 신호강도 값을 가중치로 변환하여 금속시험편 없는(Norma)영상과 비교하였다. 또한 시상면영상과 횡단면영상의 왜곡범위를 정량적으로 수치화하여 금속시험편 없는 영상면적과 비교하였다. 그 결과 고 신호영상의 신호강도 값은 스테인리스의 경우 팬텀(Phantom) 2, 돼지 뼈(Bone) 1.8, 티타늄의 경우 팬텀 1.7, 돼지 뼈 1.3 만큼 금속시험편 없는 신호강도가중치 값보다 높은 것을 알 수 있었다. 또한 자기공명영상의 왜곡형태와 왜곡 범위는 금속시험편이 없는 영상의 단면적대비 스테인리스의 경우 팬텀 65.8 %, 돼지 뼈 61.5 %, 티타늄은 팬텀 23.1 %, 돼지 뼈 38.5 % 의 왜곡범위를 나타냈다. 결론적으로 본 실험에서는 신호강도가중치값과 왜곡범위가 낮게 변화를 보인 티타늄이 스테인리스 시험편보다 더 진단적 가치가 높은 자기공명영상임을 알 수 있었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권2호
• /
• pp.138-141
• /
• 2006

Introduction : In recent years, vascularized, i.e., living bone grafts, have been widely applied in the field of oral and maxillofacial surgery, as a method of treatment of congenital or acquired non-unions, and a large defects in mandible. The vascularized fibular graft has been especially used for this purpose because of its shape and mechanical strength. The postoperative hypertrophy of grafted fibula is of particular interest to us. Material and methods : This study was undertaken to determine the volume change(indirect methods) and radiographic appearance of a free vascularized fibular graft as it responds to the mechanical and physiologic features of its new environment. In order to elucidate the long term effect on fibular mass after mandibular reconstruction, change in various method of volume change was utilized as indirect measure of change in long-term. Results : The younger the patient, the more prominent and rapid the hypertrophy of the graft. the hypertrophy of the graft never exceeded the diameter of the recipient bone, except for callus enlargement after stress fracture of the grafted bone. Conclusion : Etiologic explanations for this phenomenon have not been clarified in the previeous literature. some of the factors implicated include a periosteal reaction or new bone formation, as seen at the onset of bone union after a fracture in a child, a reaction to the mechanical loading on the graft and a reaction to the circulatory changes resulting from the grafting procedure.

• 대한치과보철학회지
• /
• 제32권4호
• /
• pp.484-514
• /
• 1994

Cantilever bridge is widely used by mny clinicians, but its worst mechanical character, so called Class I lever system, makes dentists hesitate to restore the missing tooth with it. Therefore it is important to study stress of the cantilever bridge. In this study, two models of cantilever bridges that restores the missing mandibular second molar with two abutment teeth were constructed. One model was a type of cantilever bridge supported by a normal alveolar bone, the other one was supported by an alveolar bone resorbed to its 1/3 of root length. Maximum bite force(550N) and funtional maximum bite force(300N) were vertically applied to the distal end of the pontic, distal 1/3, and distal half of the pontic. And each force was also applied to centric occlusal contacts as a distributed force. Total 16 loading cases were compared and analyzed with 3-dimensional finite element method. The results were as follows: 1. The stress was concentrated on the joint of the pontic and the retainer, grooves, and distal cervical margin of the posterior retainer. 2. In case of maximum bite force(550N) at the end of the pontic, the risk of fracture at the joint of the pontic and the retainer was high. 3. In case of distributed force in centric occlusion and functional maximum bite force(300N), the stresses were less than the yield strength of the type VI gold for any loading cases. 4. In case of alveolar bone resorption, the occlusal force to the cantilever pontic caused more stress on the root apex and less stress on the alveolar crest region of the distal surface of the posterior abutment. 5. In case of alveolar bone resorption, the displacement was larger than that of normal alveolar bone in all loading cases.

• 한국컴퓨터정보학회논문지
• /
• 제12권5호
• /
• pp.285-292
• /
• 2007

본 논문은 정형외과영역인 대퇴부에 고정하여 사용하는 금속판으로 골 고정 골절치료의 유합술 골절치료를 할 수 있도록 구성하였는데, 사용되는 치료방법은 견고하고, 안정적이며, 역동적인 생물학적 금속판으로 고정 골수강 내 고정술을 적용되도록 견고한 골접촉 곡선형 시스템을 분석하였다. 금속판은 두 가지 유형으로 장형과 단형으로 구성되고, 금속판의 굴곡이 구조적이고 기하학적으로 경성 및 강도가 고루 분포하도록 최적화 하였다. 장 플레이트의 골접촉에 따른 곡선형으로 굽힙강도는 11,000N 이고, 단 플레이트의 골접촉에 따른 곡선형으로 굽힙강도는 6,525N 이며, 금속판에 골편간 압박을 주는 인장강도는 $1573N/m^2,\;1539N/m^2$정도이다. 금속판은 곡선부와 금속판부의 두 가지 부분으로 나뉘어져 있는데, 곡선부만 있는 단형과 밑 부분의 금속판이 달려있는 장형으로 진행되며, 곡선부의 단형은 전체적인 Profile이 낮고, 금속판이 달려있는 장형은 슬리브의 일체형으로 Profile보다 약간 높아져서 있다. 본 논문의 결과로 제공되는 것은 Hip Implant의 Revision case에 있어 보완뿐만 아니라 Hip Neck Fracture 경우에 사용되었던 Compression Hip Screw의 사용이 가능할 것으로 예상된다.

• Restorative Dentistry and Endodontics
• /
• 제28권6호
• /
• pp.491-497
• /
• 2003

The purpose of this study was to evaluate the correlation between hybrid layer thickness and bond strength using confocal laser scanning microscope and microtensile bond strength test of two adhesive systems. The dentin surface of human molars. sectioned to remove the enamel from the occlusal surface. Either Scotchbond Multi-Purpose(3M Dental Product, St. Paul, MN, U.S.A) or Clearfil SE Bond (Kuraray, Osaka, Japan) was bonded to the surface. and covered with resin-composite. The resin-bonded teeth were serially sliced perpendicular to the adhesive interface to measure the hybrid layer thickness by confocal laser scanning microscope. The specimen were trimmed to give a bonded cross-sectional surface area of $1\textrm{mm}^2$, then the micro-tensile bone test was performed at a cross head speed of 1.0 mm/min. All fractured surfaces were also observed by stereomicroscope. There was no significant differences in bond strengths the materials(p>0.05). However. the hybrid layers of three-step dentin adhesive system, SM, had significantly thicker than self-etching adhesive system. CS(p<0.05). Pearson's correlation coefficient showed no correlation between hybrid layer thickness and bond strengths(p>0.05). Bond strengths of dentin adhesive systems were not dependent on the thickness of hybrid layer.

• Restorative Dentistry and Endodontics
• /
• 제40권1호
• /
• pp.30-36
• /
• 2015

Objectives: This study was performed to determine whether the combined use of one-bottle self-etch adhesives and composite resins from same manufacturers have better bond strengths than combinations of adhesive and resins from different manufacturers. Materials and Methods: 25 experimental micro-shear bond test groups were made from combinations of five dentin adhesives and five composite resins with extracted human molars stored in saline for 24 hr. Testing was performed using the wire-loop method and a universal testing machine. Bond strength data was statistically analyzed using two way analysis of variance (ANOVA) and Tukey's post hoc test. Results: Two way ANOVA revealed significant differences for the factors of dentin adhesives and composite resins, and significant interaction effect (p < 0.001). All combinations with Xeno V (Dentsply De Trey) and Clearfil $S^3$ Bond (Kuraray Dental) adhesives showed no significant differences in micro-shear bond strength, but other adhesives showed significant differences depending on the composite resin (p < 0.05). Contrary to the other adhesives, Xeno V and BondForce (Tokuyama Dental) had higher bond strengths with the same manufacturer's composite resin than other manufacturer's composite resin. Conclusions: Not all combinations of adhesive and composite resin by same manufacturers failed to show significantly higher bond strengths than mixed manufacturer combinations.

• The Journal of Advanced Prosthodontics
• /
• 제16권2호
• /
• pp.91-104
• /
• 2024

PURPOSE. The objectives of the current study were to estimate the influence of self-reinforced hollow structures with a graded density on the dimensional accuracy, weight, and mechanical properties of Co-Cr objects printed with the direct metal laser sintering (DMLS) technique. MATERIALS AND METHODS. Sixty-five dog-bone samples were manufactured to evaluate the dimensional accuracy of printing, weight, and tensile properties of DMLS printed Co-Cr. They were divided into Group 1 (control) (n = 5), Group 2, 3, and 4 with incorporated hollow structures based on (spherical, elliptical, and diamond) shapes; they were subdivided into subgroups (n = 5) according to the volumetric reduction (10%, 15%, 20% and 25%). Radiographic imaging and microscopic analysis of the fractographs were conducted to validate the created geometries; the dimensional accuracy, weight, yield tensile strength, and modulus of elasticity were calculated. The data were estimated by one-way ANOVA and Duncan's tests at P < .05. RESULTS. The accuracy test showed an insignificant difference in the x, y, z directions in all printed groups. The weight was significantly reduced proportionally to the reduced volume fraction. The yield strength and elastic modulus of the control group and Group 2 at 10% volume reduction were comparable and significantly higher than the other subgroups. CONCLUSION. The printing accuracy was not affected by the presence or type of the hollow geometry. The weight of Group 2 at 10% reduction was significantly lower than that of the control group. The yield strength and elastic modulus of the Group 2 at a 10% reduction showed means equivalent to the compact objects and were significantly higher than other subgroups.

• 대한골관절종양학회지
• /
• 제10권2호
• /
• pp.96-106
• /
• 2004

목적: 악성 골, 연부 조직 종양 환자에게 시행한 자가골 재이식술을 이용한 사지 구제술의 치료 결과를 분석하여 그 유용성을 알아보고자 하였다. 대상 및 방법: 1990년 2월부터 2003년 1월까지 악성 골, 연부 조직 종양으로 자가골 재이식술을 이용한 사지 구제술을 시행 받은 환자 중에서 최소 18개월 이상 장기 추시가 가능했던 29예를 대상으로 하였다. 남자가 18예, 여자가 11예로 환자의 평균 연령은 33세(범위, 10~65세)였고, 평균 추시 기간은 51.8개월(범위, 18~117개월)이었으며 Enneking의 분류에 따른 병기는 IIA가 10예, IIB가 19예였다. 자가골의 재처리 방법은 동결 처리법(deep freezing)이 6예, 고온-고압 처리법(autoclaving) 11예, 저온 처리법(pasteurization이) 7예였으며, 5예 에서는 고온-고압 처리법과 혈관 부착 비골 이식술을 병행하였다. 단순 방사선 검사를 통하여 골 유합을 평가하였고, 1993년에 국제 사지 보존 회의(International Symposium On Limb Salvage; ISOLS)에서 수정 보완한 방법을 이용하여 기능을 평가하였다. 결과: 골 유합 기간은 평균 7.2개월(범위, 3~15개월)로, 동결 처리법은 5.8개월(범위, 4~8개월), 고온-고압 처리법은 9.7개월(범위, 6~15개월), 저온 처리법은 5.9개월(범위, 4~8개월)이었고, 고온-고압 처리법과 혈관 부착 비골 이식술을 병행한 경우는 5개월(범위, 3~7개월)이었다. 기능 평가 백분율은 평균 76.8% (범위, 40~90%)로, 동결 처리법은 65.8% (범위, 40~85%), 고온-고압 처리법은 76.6%(범위, 40~90%), 저온 처리법은 81.6%(범위, 70~90%)였고, 고온-고압 처리법과 혈관 부착 비골 이식술을 병행한 경우는 83.4%(범위, 75~90%)였다. 6예에서 합병증이 발생하였는데 국소 재발, 폐 전이, 감염, 골절이 각각 1예였고, 절골부의 불유합이 2예였다. 결론: 자가골 재이식술을 이용한 사지 구제술은 악성 골, 연부 조직 종양의 유용한 치료 방법이며, 특히 고온-고압 처리법을 이용한 자가골 재이식술은 국소 재발을 방지할 수 있는 확실한 방법이었으며, 혈관 부착 비골 이식술을 병행하면 재처리된 자가골의 기계적 강도나 골유도 능력이 감소하는 단점을 보완할 수 있을 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제18권9호
• /
• pp.418-424
• /
• 2017

마그네슘은 다른 금속들에 비해 비강도가 높으며, 우수한 진동 흡수능, 전자파 차폐성 등으로 산업 전반에 많이 활용되고 있다. 예를 들면, 자동차 시트 프레임, 실린더 헤드 등 자동차 부품으로도 사용되며 노트북 케이스, 핸드폰 케이스 등의 전자제품에도 널리 사용되고 있다. 또한 신체의 뼈가 금이 가거나 부서졌을 경우, 그 손상된 뼈의 치료를 보조하기 위해 사용되는 골 접합용 임플란트 재료로 각광받고 있다. 현재 임플란트 재료로는 Ti alloy, Stainless steel, Co-Cr-Mo alloy등이 사용되어 지고, Mg 합금은 연구단계에 머물러 있다. 현재 골접합용 임플란트 재료의 문제점으로는 한번 접합 수술 후에 회복이 되면 이것을 제거하기 위한 수술을 또 해야 한다는 점이 있다. 하지만 마그네슘은 현재 재료와 비교하여 충분한 강도를 실현 할 수 있으며, 일정시간 후 자체적으로 분해되고 인체에 무해한 원소기 때문에 연구가 진행되고 있다. 그러나 순수 Mg으로는 충분한 강도와 내식성을 가질 수 없기 때문에 합금원소를 첨가하여 Mg 합금을 설계한다. 본 논문에서는 마그네슘에 인체에 무해한 Ca, Zn를 첨가하여 합금을 설계하였고, 추가적으로 강도와 내식성을 향상시키기 위해서 Grain refiner로서 Sr을 소량 첨가하여 최종 합금을 설계하였다. Sr은 방사선 원소는 인체에 유해하지만, 그 외 천연 Sr 원소는 인체에 무해하다. 이렇게 제조된 합금을 광학현미경, 주사전자현미경을 통해 미세조직분석을 수행하고, 인장시험, 동전위 분극 시험, 침지시험을 통해 기계적 특성 및 부식특성을 평가하였다. 결론적으로, Sr 첨가에 의해 조직이 미세해졌으며, 기계적 특성 및 내식성이 향성된 것을 확인 할 수 있었다.