• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3289-3292
• /
• 2013

Introduction: The purpose of this study was to identify clinical profiles of patients with low risk of having bone metastases, for which bone scanning could be safely eliminated. Materials and Methods: This retrospective cross sectional study looked at prostate cancer patients seen in the Urology Departments in 2 tertiary centres over the 11 year period starting from January 2000 to May 2011. Patient demographic data, levels of PSA at diagnosis, Gleason score for the biopsy core, T-staging as well as the lymph node status were recorded and analysed. Results: 258 men were included. The mean age of those 90 men (34.9%) with bone metastasis was $69.2{\pm}7.3$ years. Logistic regression found that PSA level (P=0.000) at diagnosis and patient's nodal-stage (P=0.02) were the only two independent variables able to predict the probability of bone metastasis among the newly diagnosed prostate cancer patients. Among thowse with a low PSA level less than 20ng/ml, and less than 10ng/ml, bone metastasis were detected in 10.3% (12 out of 117) and 9.7% (7 out of 72), respectively. However, by combining PSA level of 10ng/ml or lower, and nodal negative as the two criteria to predict negative bone scan, a relatively high negative predictive value of 93.8% was obtained. The probability of bone metastasis in prostate cancer can be calculated with this formula: -1.069+0.007(PSA value, ng/ml)+1.021(Nodal status, 0 or 1)=x Probability of bone metastasis=$2.718^x/1+2.718^x$. Conclusion: Newly diagnosed prostate cancer patients with a PSA level of 10ng/ml or lower and negative nodes have a very low risk of bone metastasis (negative predictive value 93.8%) and therefore bone scans may not be necessary.

• Journal of Veterinary Clinics
• /
• v.17 no.1
• /
• pp.212-218
• /
• 2000

Osteoporosis is a bone disease associated with reduced bone mineral density resulting in debilitating bone fractures. The present study was carried out to determine the influence of ovariectomy(OVX) on serum level of sex steroid and bone metabolism, as well as bone mechanical property, in OVX subjects in comparison with controls. Body weight and food intake was significantly increased in OVX subjects than in controls. The serum level of estradiol(E2) was significantly lower in OVX subjects than in controls. The serum level of calcium and alkalin phosphatae were significantly increased in OVX subjects than in controls. The bone strength, based on the three point bending test, was not significantly different. Seven weeks after ovariectomy, the cavities in the bone reached 223% of the normal. In conclusion, seven weeks after ovariectomy osteoporo sis was evidently appeared.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.45 no.2
• /
• pp.78-83
• /
• 2022

There are several subspecies of Bombyx mori, whose silk sericin variants differ. Silk sericin can induce bone morphogenic protein-2 (BMP-2) in macrophages, and silk sericin from different species may have different levels of BMP-2 induction ability. In this study, silk sericin from three B. mori subspecies (Baegokjam, Yeonnokjam, and Goldensilk) was prepared. They were administered to RAW264.7 cells and BMP-2 expression level was studied. Bone regeneration was evaluated using a rat calvarial defect model. BMP-2 expression level was the highest in the Baegokjam group. The bone volume in the Baegokjam group was significantly higher than that in the Yeonnokjam group (P = 0.003). In conclusion, sericin from Baegokjam showed higher levels of BMP-2 expression and bone regeneration than those from Yeonnokjam and Goldensilk.

• Journal of Periodontal and Implant Science
• /
• v.45 no.6
• /
• pp.216-222
• /
• 2015

Purpose: After extraction, the alveolar bone tends to undergo atrophy in three-dimensions. The amount of alveolar bone loss in the horizontal dimension has been reported to be greater than the amount of bone loss in the vertical dimension, and is most pronounced in the buccal aspect. The aim of this study was to monitor the predictive alveolar bone level following the extraction of anterior teeth seriously involved with advanced chronic periodontitis. Methods: This study included 25 patients with advanced chronic periodontitis, whose maxillary anterior teeth had been extracted due to extensive attachment loss more than one year before the study. Periapical radiographs were analyzed to assess the vertical level of alveolar bone surrounding the edentulous area. An imaginary line connecting the mesial and the distal ends of the alveolar crest facing the adjacent tooth was arbitrarily created. Several representative coordinates were established in the horizontal direction, and the vertical distance from the imaginary line to the alveolar crest was measured at each coordinate for each patient using image analysis software. Regression functions predicting the vertical level of the alveolar bone in the maxillary anterior edentulous area were identified for each patient. Results: The regression functions demonstrated a tendency to converge to parabolic shapes. The predicted maximum distance between the imaginary line and the alveolar bone calculated using the regression function was $1.43{\pm}0.65mm$. No significant differences were found between the expected and actual maximum distances. Likewise, the predicted and actual maximum horizontal distances did not show any significant differences. The distance from the alveolar bone crest to the imaginary lines was not influenced by the mesio-distal spans of the edentulous area. Conclusions: After extraction, the vertical level of the alveolar ridge increased to become closer to the reference line connecting the mesial and distal alveolar crests.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.3
• /
• pp.133-142
• /
• 2022

PURPOSE. A large number of studies have suggested the practicability and predictability of immediate implant function, but few studies have reported marginal bone level changes during sequential loading periods. The purpose of this study was to evaluate the marginal bone remodeling of immediately loaded self-tapping implants both at each time point and during each loading period between two time points. MATERIALS AND METHODS. The patients included in this retrospective study were treated with immediately loaded NobelSpeedy Replace implants between August 2008 and July 2009. Differences in the marginal bone level (MBL) at each time point and the marginal bone level change (ΔMBL) between two time points were analyzed with Bonferroni correction (P < .05). RESULTS. Overall, 24 patients (mean age, 47.3 ± 12.8 years) with 42 immediately loaded implants and a median follow-up of 6.5 years (IQR, 67.8 months) were included. The cumulative survival rate after 10 - 12 years was 95.2%. Continuous but slow marginal bone loss was observed during long-term follow-up. MBL at both 7.5 years and 11 years was significantly lower than that at loading, 6 months, 2 years and 4 years (P < .05). No bone loss difference was found in any period before 4 years of follow up (P > .05). The loading period of 4 years to 7.5 years showed the largest ΔMBL compared to those of other time periods (P < .05). CONCLUSION. Slight bone loss occurred continuously, and more radical changes of marginal bone can be observed during the period of 4-7.5 years. Thus, long-term effective follow-up of immediately loaded implants is needed.

• Imaging Science in Dentistry
• /
• v.52 no.2
• /
• pp.197-207
• /
• 2022

Purpose: This study evaluated the associations of the dental arch form, age-sex groups, and sagittal root position (SRP) with alveolar bone thickness of the maxillary central incisors using cone-beam computed tomography (CBCT) images. Materials and Methods: CBCT images of 280 patients were categorized based on the dental arch form and age-sex groups. From these patients, 560 sagittal CBCT images of the maxillary central incisors were examined to measure the labial and palatal bone thickness at the apex level and the palatal bone at the mid-root level, according to the SRP classification. The chi-square test, Kruskal-Wallis test, and multiple linear regression were used for statistical analyses. Results: Significant differences were found in alveolar bone thickness depending on the arch form and SRP at the apex level. The square dental arch form and class I SRP showed the highest bone thickness at both levels of the palatal aspect. The taper dental arch form and class II SRP presented the highest bone thickness at the apex level of the labial aspect. No association was found between the dental arch form and SRP. Elderly women showed a significant association with thinner alveolar bone. Age-sex group, the dental arch form, and SRP had significant associations with alveolar bone thickness at the apex level. Conclusion: The patient's age-sex group, dental arch form, and SRP were associated with alveolar bone thickness around the maxillary central incisors with varying magnitudes. Therefore, clinicians should take these factors into account when planning immediate implant placement.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.75-79
• /
• 2005

There were three trials involved in this experiment. All piglets in Trial 1 were randomly distributed into the following 4 treatments. Treatment 1. Corn-soybean diet with 5% SDPP. The tryptophan level was 0.237%. Treatment 2. Corn-soybean diet with 10% meat and bone meal. The tryptophan level was 0.177%. Treatment 3. Treatment 1+0.0662% synthetic tryptophan. The total tryptophan level was 0.303. Treatment 4. Treatment 2+0.0662% synthetic tryptophan. The total tryptophan level was 0.236. Piglets in Trial 2 were distributed randomly into the following 4 treatments. Treatment 1: corn-soybean diet+10% meat and bone meal. The total tryptophan level was 0.176%. Treatment 2: corn-soybean diet+10% meat and bone meal+5% SDPP. The total tryptophan level was 0.180%. Treatment 3: Treatment 1 diet+0.004% synthetic tryptophan. The total tryptophan level was 0.180%. Treatment 4: Treatment 1 diet+0.631% synthetic tryptophan. The total tryptophan level was 0.237%. There were 4 treatments in Trial 3. Treatment 1: cornsoybean diet+10% meat and bone meal. The total tryptophan level was 0.176%. Treatment 2: Treatment 1 diet+0.061% synthetic tryptophan. The total tryptophan level was 0.237%. Treatment 3: Treatment 2 diet+0.061% synthetic tryptophan. The total tryptophan level was 0.298%. Treatment 4: corn-soybean diet+10% meat and bone meal+5% SDPP. The total tryptophan level was 0.180%. The results of Trial 1 showed that the piglets ate significantly more (p<0.05) when feed included SDPP in the diet during the first 2 weeks. The feed intake also increased when synthetic tryptophan was added in the 5% meat and bone meal diet; however, the difference did not reach a significant level (p>0.05) during the first 2 weeks. Three weeks onwards the feed intake of 5% meat and bone meal treatment was significantly lower (p<0.05) than for the other three treatments. The results of Trial 2 showed that the feed intake could be significantly improved only when the total tryptophan level reached 0.237%. Piglets in the 5% SDPP treatment had higher feed intake than piglets in 10% meat and bone meal treatment with 0.180% of tryptophan, but did not reach a significant level (p<0.05). Body weight gain also had the same trend as feed intake. The pigs in Treatment 1, the lowest total level of tryptophan treatment (0.176%), had lowest feed intake and weight gain, but the difference did not reach a significant level (p>0.05). The pigs in Treatment 1 of Trial 3 had the lowest feed intake and weight gain (p>0.05). Treatment 2 (0.237%) had the highest average feed intake from Week 1 to Week 5; the second best result was recorded in Treatment 4. As for the weight gain of the piglets in Treatment 4 (5% SDPP), they had a higher average weight during the first 3 weeks. The feed efficiency was better for Treatment 4 (5% SDPP) during the first 2 weeks. The results of these trials showed that both SDPP and tryptophan had a trend to improve the feed intake and weight gain.

• Journal of muscle and joint health
• /
• v.19 no.3
• /
• pp.350-361
• /
• 2012

Purpose: The purpose of this study is to explore the level of bone mineral densities of the femur neck and to identify factors affecting bone mineral density of the femur in Parkinson's disease (PD) patients. Methods: Participants were 121 PD patients visiting the outpatient clinic of D University Hospital in B City. Bone mineral density was measured at the femur neck by using a dual-energy x-ray absorptiometry. The serum vitamin D level, the amounts of milk intake, caffeine intake, cigaret smoking, and alcohol consumption, and the number of steps taken daily were measured. Past and present disease history, the medication history, and duration of the disease were also collected. The level of disability was obtained by neurologists using the Hoehn and Yahr stage and the Unified Parkinson's Disease Rating Scale. Results: Among PD patients, 57% had osteopenia and 15.7% had osteoporosis. The bone mineral density of the femur was associated with weight, serum vitamin D level, age, and working status. Conclusion: The identification of weight and serum vitamin D level as important predictive factors emphasizes the importance of balanced nutrition for PD patients.

• Journal of Nutrition and Health
• /
• v.31 no.4
• /
• pp.716-728
• /
• 1998

To investigate the effect of dietary Ca levels on metabolic changes of Ca and skeleton in postmenopausal women, 10-month-old ovariectomized female rats were compared with 2 month old rats. The rats were fed either 0.2% or 1.2% Ca diets for 16 weeks. Food intake and weight gain as higher in rats fed high Ca diets and in ovariectomized rats. Apparent Ca absorption as higher, and Ca balance was lower in the low Ca groups. Vertebrae density was higher in old rats or those fed a high Ca diets. The old rats and ovariectomized rats showed decreased bone formation, increased bone resorption and kidney function deterioration resulting in increased urinary Ca excretion. Contradictory to the above observation, old rats and ovariectomized rats still showed higher bone mass and bone ash content. Therefore aging was not fully onging in 10-month-old rats. Bone weights, mineral contents, and mineral/wt ratio were lower in ovariectomized rats. Dietary Ca level did not affect urinary Ca excretion, urinary protein excretion, GFR, serum alkaline phosphatase, or urinary hydroxyporline excretion. This means that dietary Ca level did not influence kidney function or bone turnover. However Ca content and the ash content of femur, 4th vertebra, and scapula were increased in high Ca groups. Therefore, it is considered that decreased bone formation and accelerated bone resorption may account for the increased osteoporotic risk in women in menopause after middle age. However, Ca metabolism can be improved and bone components can be maintained if Ca is supplemented.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.5
• /
• pp.316-321
• /
• 2020

PURPOSE. The stress distribution and microgap formation on an implant abutment structure was evaluated to determine the relationship between the direction of the load and the stress value. MATERIALS AND METHODS. Two types of three-dimensional models for the mandibular first molar were designed: bone-level implant and tissue-level implant. Each group consisted of an implant, surrounding bone, abutment, screw, and crown. Static finite element analysis was simulated through 200 N of occlusal load and preload at five different load directions: 0, 15, 30, 45, and 60°. The von Mises stress of the abutment and implant was evaluated. Microgap formation on the implant-abutment interface was also analyzed. RESULTS. The stress values in the implant were as follows: 525, 322, 561, 778, and 1150 MPa in a bone level implant, and 254, 182, 259, 364, and 436 MPa in a tissue level implant at a load direction of 0, 15, 30, 45, and 60°, respectively. For microgap formation between the implant and abutment interface, three to seven-micron gaps were observed in the bone level implant under a load at 45 and 60°. In contrast, a three-micron gap was observed in the tissue level implant under a load at only 60°. CONCLUSION. The mean stress of bone-level implant showed 2.2 times higher than that of tissue-level implant. When considering the loading point of occlusal surface and the direction of load, higher stress was noted when the vector was from the center of rotation in the implant prostheses.