• Journal of the Korean Dietetic Association
• /
• v.21 no.3
• /
• pp.181-193
• /
• 2015

This study investigated anthropometric and biochemical characteristics, nutrient intakes, and bone density of Korean elderly men (over 65 yrs). Data on bone density and anthropometric (height, weight, waist circumference, body mass index and blood pressure) and biochemical (total cholesterol, high-density lipoprotein (HDL)-cholesterol, low-density lipoprotein (LDL)-cholesterol, triglyceride and hemoglobin) characteristics, nutrient intakes, and nutrient density were obtained from the Fifth Korea National Health and Nutrition Examination Survey (KNHANES, 2008~2011). Subjects were categorized into smoking and non-smoking groups, and smoking groups were divided into three groups by smoking period (under 20 yrs, 21~40 yrs and over 41 yrs). Serum triglyceride concentrations of the smoking group aged 21~40 yrs were higher than those of other groups (P<0.01), whereas other biochemical factors were not different. Intake ratios of energy, protein, phosphorus and sodium in subjects were over 100% of Dietary Reference Intake for Koreans (KDRI). Nutrient densities according to intakes of thiamin, riboflavin, and niacin per 1,000 kcal were significantly different among the groups (P<0.05). Bone density of subjects decreased according to smoking period (T-score of total femur in non-smoking group -0.3108, and -0.2918, -0.4941, -0.6847 in smoking group, respectively). Ratio of osteoporosis was 38.1% in the non-smoking group and 44.4%, 51.1%, and 64.0% in the smoking group, respectively. The findings of the present study show that smoking may be associated with bone health, higher ratio of osteoporosis, and low nutrient density in elderly men. Therefore, practical and systematic non-smoking programs are required to improve the bone density of elderly men as well as maintain healthy bone levels and desirable lifestyle.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.1
• /
• pp.51-55
• /
• 2015

PURPOSE. Bone density at implant placement site is a key factor to obtain the primary stability of the fixture, which, in turn, is a prognostic factor for osseointegration and long-term success of an implant supported rehabilitation. Recently, an implant motor with a bone density measurement probe has been introduced. The aim of the present study was to test the objectiveness of the bone densities registered by the implant motor regardless of the operator performing them. MATERIALS AND METHODS. A total of 3704 bone density measurements, performed by means of the implant motor, were registered by 39 operators at different implant sites during routine activity. Bone density measurements were grouped according to their distribution across the jaws. Specifically, four different areas were distinguished: a pre-antral (between teeth from first right maxillary premolar to first left maxillary premolar) and a sub-antral (more distally) zone in the maxilla, and an interforaminal (between and including teeth from first left mandibular premolar to first right mandibular premolar) and a retroforaminal (more distally) zone in the lower one. A statistical comparison was performed to check the inter-operators variability of the collected data. RESULTS. The device produced consistent and operator-independent bone density values at each tooth position, showing a reliable bone-density measurement. CONCLUSION. The implant motor demonstrated to be a helpful tool to properly plan implant placement and loading irrespective of the operator using it.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.1
• /
• pp.7-15
• /
• 2003

This study used FEM(Finite Element method) based on micro-CT images to see the effects of occlusal force distribution with varying bone density and structure. the mandibular premolar region from human cadaver, thickness of 10mm was imaged using micro-CT. the cross sectional images were taken every $10{\mu}m$. these were reconstructed and the longitudinal image at the mid point of mesiodistal of the speciman was obtained for the specimen for the FEM. The stress disribution produced by a vertical force at 100N and 100N horizontal were analyzed by MSC Nastran FEM Package. according to the result of this study the occlusal force distribution depends on the structure of cancellus bone and for further information on the occlusal force distribution on the tooth and the surrounding structure requires further studies on cancellus bone structure. CEJ of all model show the highest peak and region whice meet teeth and bone show second high peak. Original model and cortical bone add model show different stress distribution. Stress distribution changed according to bone structures and densities.

• Journal of Surface Science and Engineering
• /
• v.37 no.5
• /
• pp.249-252
• /
• 2004

Effects of HA and TiN coating on the electrochemical characteristics of Ti-6AI-4V alloys for bone plates were investigated using various test methods. Ti-6AI-4V alloys were fabricated by using a vacuum induction furnace and bone plates were made by laser cutting and polishing. HA was made of extracted tooth sintered and then tooth ash was used as HA coating target. The TiN and HA film coating on the surface were carried on using electron-beam physical vapor deposition (EB-PVD) method. The corrosion behaviors of the samples were examined through potentiodynamic method in 0.9% NaCI solutions at $36.5\pm$$1^{\circ}C$ and corrosion surface was observed using SEM and XPS. The surface roughness of TiN coated bone plates was lower than that of tooth ash coated plates. The structure of TiN coated layer showed the columnar structure and tooth ash coated layer showed equiaxed and anisotrophic structure. The corrosion potential of the TiN coated specimen is comparatively high. The active current density of TiN and tooth ash coated alloy showed the range of about $1.0xl0^{-5}$ $A\textrm{cm}^2$, whereas that of the non-coated alloy was$ 1.0xl0^{-4}$ $A\textrm{cm}^2$. The active current densities of HA and TiN coated bone plates were smaller than that of non-coated bone plates in 0.9% NaCl solution. The pitting potential of TiN and HA coated alloy is more drastically increased than that of the non-coated alloy. The pit number and pit size of TiN and HA coated alloy decreased in compared with those of non-coated alloy. For the coated samples, corrosion resistance increased in the order of TiN coated, tooth ash coated, and non-coated alloy.

• Journal of the East Asian Society of Dietary Life
• /
• v.5 no.1
• /
• pp.41-51
• /
• 1995

Bone mass accretion during puberty appears to be critical in the development of peak bone mass. Although bone density of females in Korea has been studied, only a few studies have related bone mass with anthropometric patterns or puberty in the pubescent girls. This study was conducted as part of a study of major determinants of bone development during puberty. Subjects were aged 14∼16 yr(mean 14.97), and had no history of disorders or dedication use likely to influence bone or calcium metabolism. Bone mineral density and content were measured by dual energy X-ray absorptiometry using a Lunar DPX+Scanner (Lunar Madison, WI). Also, total body fat, and total lean body mass were assessed using a Lunar DPX dual-energy X-ray absorptiometer, Pubertal status was assessed according to the Marshall and Tanner guidelines. Serum levels of osteocalcin was measured by RIA using a commercial kit assay. Skinfold measurements were taken with a skinfold caliper(Lange Caliper, USA). Data were analyzed using the regression and GLM procedure of the statistical package SAS. The results indicated that the observed means for lumbar spine BMD and femoral BMD correspond to approximately 91% and 96% of the means for young adult females, respec tively. All subjects were menarchal, with the majority being in the middle to end stages of pubertal development. Total body BMD was positively related to fat mass(P<0.001), lean body mass and time since menarche, and negatively related to urine pyridinoline, serum alkaline phosphatase and osteocalcin. The data indicate that girls who reported lower age for menarche had significantly higher bone densities than girls who reported higher age for menarche. Attaining peak skeletal bone mass during puberty may reduce the incidence of osteoporosis in later life. this finding suggests that early menarche may augment peak bone mass, influencing the extent of bone loss later in adulthood. The results suggest that good nutrition in childhood appears to be needed not for growth and development, but possibly also to assure an optimal peak of bone mass and thus greater latitude for the maintenance or skeletal integrity in the face of bone losses. Troeps skinfold thickness was a better predictor of total BMD and total BMC than was any other skinfold thickness. The study did not find a relationship between total BMD and body fat %, but total fat was significantly positively related to total BMD(r=0.49) and total BMC(r=0.60). It supports earlier report that there was a significant correlation between TBMD and body weight. Conclusively, total fat, lean body mass and pubertal development could influence BMD in pubescent girls. Clearly, longitudinal studies are required to assess the effect of puberty on peak bone mass, and to define further the potential determinants of peak bone mass.

• Journal of Nutrition and Health
• /
• v.37 no.1
• /
• pp.52-60
• /
• 2004

This study was conducted to investigate the bone mineral density (BMD) and the anthropometric measurements, socioeconomic factors, family history of osteoporosis and other environmental factors affecting BMD in children. One hundred sixty children (80 males, 80 females) in second grade of elementary school in Seoul were recruited; the mean age was 7.7 $\pm$ 0.47 years. Bone mineral density was measured in the lumbar spine (LS), femoral neck (FN), femoral trochanter (FT), and Ward's triangle (WT) by Dual Energy X-ray Absorptiometry (DEXA). Socioeconomic factors, family history of osteoporosis, and other environmental factors were assessed by questionnaire. Bone mineral densities of LS, FN, FT, and WT were 0.677, 0.637, 0.618, and 0.658 g/$\textrm{cm}^2$. BMD of boys was higher than that of girls (LS: 0.685 vs. 0.669, FN: 0.660 vs. 0.614, FT: 0.632 vs. 0.604, WT: 0.678 vs. 0.639 g/$\textrm{cm}^2$). Anthrometric measurements (height, weight relative body weight, circumference of waist and hip) were positively correlated with BMD. With increasing family income, BMD of LS was significantly lowered, and negative correlation was observed between mother's age at birth of subject and the BMD of FN. And the BMD of children with a family history of osteoporosis was significantly lower. However BMDs were not different by educational level of parents, family pattern, delivery term, birth weight, and type of feeding. Further studies are needed to clarify the factors affecting BMD of children and earlier age, included infants and even prenatal life. If any association is revealed and persist until the attainment of peak bone mass, osteoporosis prevention programs are needed to be start very early in the life cycle.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.438-444
• /
• 2011

Purpose: Adipose-derived stromal cells (ASCs) are readily harvested from lipoaspirated tissue or subcutaneous adipose tissue fragments. The stromal vascular fraction (SVF) is a heterogeneous set of cell populations that surround and support adipose tissue, which includes the stromal cells, ASCs, that have the ability to differentiate into cells of several lineages and contains cells from the microvasculature. The mechanisms that drive the ASCs into the osteoblast lineage are still not clear, but the process has been more extensively studied in bone marrow stromal cells. The purpose of this study was to investigate the osteogenic capacity of adipose derived SVF cells and evaluate bone formation following implantation of SVF cells into the bone defect of human phalanx. Methods: Case 1 a 43-year-old male was wounded while using a press machine. After first operation, segmental bone defects of the left 3rd and 4th middle phalanx occurred. At first we injected the SVF cells combined with demineralized bone matrix (DBM) to defected 4th middle phalangeal bone lesion. We used P (L/DL)LA [Poly (70L-lactide-co-30DL-lactide) Co Polymer P (L/DL)LA] as a scaffold. Next, we implanted the SVF cells combined with DBM to repair left 3rd middle phalangeal bone defect in sequence. Case 2 was a 25-year-old man with crushing hand injury. Three months after the previous surgery, we implanted the SVF cells combined with DBM to restore right 3rd middle phalangeal bone defect by syringe injection. Radiographic images were taken at follow-up hospital visits and evaluated radiographically by means of computerized analysis of digital images. Results: The phalangeal bone defect was treated with autologous SVF cells isolated and applied in a single operative procedure in combination with DBM. The SVF cells were supported in place with mechanical fixation with a resorbable macroporous sheets acting as a soft tissue barrier. The radiographic appearance of the defect revealed a restoration to average bone density and stable position of pharyngeal bone. Densitometric evaluations for digital X-ray revealed improved bone densities in two cases with pharyngeal bone defects, that is, 65.2% for 4th finger of the case 1, 60.5% for 3rd finger of the case 1 and 60.1% for the case 2. Conclusion: This study demonstrated that adipose derived stromal vascular fraction cells have osteogenic potential in two clinical case studies. Thus, these reports show that cells from the SVF cells have potential in many areas of clinical cell therapy and regenerative medicine, albeit a lot of work is yet to be done.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.2
• /
• pp.107-114
• /
• 2001

Objectives : To compare jaw bone density of young adults (control group) and post-menopausal women(experimental group) in periapical and panoramic film. Materials and Methods : The bone mineral density values of lumbar and femur were measured by dual-energy X-ray absorptiometry(DEXA) and T scores of lumbar were obtained. T scores were classified into 3 group (T<-2.5, $-2.5{\leqq}T<-1$, $-1{\leqq}T$). Radiographic densities of alveolar bones were measured from interdental bones of premolar, molar areas in the maxilla and mandible and expressed into copper step wedge thickness by Scion $Image^{(R)}$ program. We considered these values of step wedge thickness as bone density of alveolar bone. Panorama mandibular index(PMI) was calculated by the method that the height of the inferior cortex of the mandible was divided by the height from the lower border of the mandible to the superior edge of the mental foramen. Bone density of alveolar bone and PMI were analysed statistically. Results : There were significant differences in bone mineral density of lumbar and femoral neck between control and experimental groups. There were also significant differences in bone density of premolar and molar area of jaw between control and experimental groups by MANOVA test. When considered lumbar T variables, there was only difference in interdental bone density of maxillary molar area between control and experimental group, but there was interaction. Interdental bone density of experimental group was appeared higher in $-1{\leqq}T$ group and lower in T<-2.5 group than control group. There was significant difference in PMI between control and experimental groups, but there was also inter action, thus, PMI of experimental group was appeared higher in $-1{\leqq}T$ group and lower in T<-2.5 group than control group. Conclusion : There were significant differences of alveolar density and cortical bone thickness between young men and post-menopausal women in periapical and panoramic film. These differences were dependent on lumbar T.

• Journal of radiological science and technology
• /
• v.22 no.1
• /
• pp.49-53
• /
• 1999

To inquire its usefulness of the clinical application of intelligent replenishment system of automatic X-ray film processor based on film density, we processed the serial 300 sheets of radiographic film of chest [$14{\times}14"$, HR-C type] and bone [elbow & ankle($8{\times}10"$), skull($10{\times}12"$), hand & foot($11{\times}14"$), pelvis($14{\times}17"$), HR-G type, 68, 70, 77, 85 sheets respectively]. We analyzed the characteristic corves, relative speeds, average gradients and base plus fog densities every twenty five sheets. We also evaluated the developer and fixer replenishment volumes every that time. In the chest and bone radiograph two all, the characteristic curves were little change, and the relative speeds, average gradients and base plus fog densities were within the maximum control limits. The average developer replenishment volumes were about 43m1/sheet and 39m1/sheet respectively. It brings decreased results about 29% in comparison with the conventional replenishment system. In our experiences, we conclude that the intelligent replenishment system of automatic X-ray film processor based on film density maintains image quality consistently, decreases also the replenishment volumes. Therefore, this system will be resulted in economic and environmental effects, and solve problems of over and low replenishment volume.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.6
• /
• pp.542-547
• /
• 2009

In this in vivo study, correlations of lumbar and femoral bone mineral densities (BMDs) with calcaneal speed of sound (SOS) were investigated in 36 osteoporotic women. Areal BMDs of the L2-L4 lumbar spine and the right femoral neck were measured by using dual energy X-ray absorptiometry (DEXA). SOS of the right calcaneus was measured by using ultrasound bone densitometry. Pearson's correlation coefficient (r) and level of significance (p) were used to evaluate the correlations between measurements. Lumbar BMD was highly correlated with femoral BMD (r=0.81). Lumbar and femoral BMDs exhibited similar comparable negative correlations with age (r=-0.52 and r=-0.55). A moderate negative correlation was found between calcaneal SOS and age (r=-0.45). Calcaneal SOS was significantly correlated with lumbar and femoral BMDs, with a higher correlation with femoral BMD rather than with lumbar BMD (r=0.54 and r=0.62). However, calcaneal SOS may not be an optimum index for the estimation of BMD of the most important fracture sites, such as the lumbar and the femur, because it showed lower correlations with lumbar and femoral BMDs compared to that with calcaneal BMD. Therefore, the development of a quantitative ultrasound technology for the direct measurement of acoustic properties at the lumbar and the femur is required to estimate BMD of these sites more accurately.