• Korean journal of food and cookery science
• /
• v.15 no.4
• /
• pp.382-387
• /
• 1999

This study was conducted to investigate the changes of mineral contents in radish leaves, soybean sprout and chwi namul by cooking method(boiling, steaming, sauting) and cooking time(1, 3, 5 min.). The residual rate of minerals(such as Calcium, Sodium, Potassium, Iron and Magnesium) in radish leaves, soybean sprout and chwi namul by 1 minute sauting was the range of 83.2 to 99.1%. It was shown that sauting was desirable method for all three vegetables. The residual rate by the cooking method was sauting, steaming, boiling, in that order, but boiling in radish leaves and chwi namul were more desirable method than steaming for Calcium use. At the cooking method and cooking time, Potassium content in soybean sprout was reduced remarkably in 5 minutes boiling. Boiling of radish leaves and soybean sprout showed that Sodium was reduced remarkably after 5 minutes of boiling, 54.4% for radish leaves and 19.9% for soybean sprout, respectively.

• Nuclear Engineering and Technology
• /
• v.44 no.8
• /
• pp.847-854
• /
• 2012

Despite extensive research efforts, the mechanism of the nucleate boiling phenomena is still not clear. A direct numerical simulation of the boiling phenomena is one of the promising approaches in order to clarify its heat transfer characteristics and discuss their mechanism. Therefore, many DNS procedures have been developed based on recent highly advancing computer technologies. This brief review focuses on the state of the art in direct numerical simulation of the pool boiling phenomena over the past two decades. In this review, the fundamentals of the boiling phenomena and the bubble departure and micro-layer models are briefly introduced, and then the numerical procedures for tracking or capturing interface/surface shape such as the front tracking method, level set method, volume of fluid treatments, and other methods (Lattice Boltzmann method, phase-field method and so on) are briefly reviewed.

• Food Science and Preservation
• /
• v.4 no.3
• /
• pp.337-341
• /
• 1997

Texture is an important quality factor of processed chestnut products, which changes depending on the conditions of boiling process. The conventional boiling process consists of three stage(1st : 70 minutes at 60$^{\circ}C$; 2nd : 20minutes at 70$^{\circ}C$; 3rd : 80minutes at 98$^{\circ}C$). To improve the conventional boiling process of processed chestnut products, we investigated the changes of texture at different stages of boiling process and undertook the optimization of boiling process by response surface method on heating times of 2nd and 3rd heating, and amount of softening agent. The initial hardness and cohesiveness, the most important textural characteristics of chestnut, were 7.876kg and 0.189, respectively. In the third boiling stage, hardness decreased to 0.313kg and cohesiveness increased to 0.310. Using response surface method the minimum point of hardness and maximum point of cohesiveness was examined and model equations for predicting the changes of hardness and cohesiveness in the optional boiling condition were developed.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.218-222
• /
• 2009

A level-set (LS) method is presented for computation of boiling phenomena which involve liquid-vapor interfaces that evolve, merge and break up in time, the flow and temperature fields influenced by the interfacial motion, and the microlayer that forms between the solid and the vapor phase near the wall. The LS formulation for tracking the phase interfaces is modified to include the effects of phase change on the liquid-vapor interface and contact angle on the liquid-vapor-solid interline. The LS method can calculate an interface curvature accurately by using a smooth distance function. Also, it is straightforward to implement for two-phase flows in complex geometries. The numerical method is applied for analysis of nucleate boiling on a horizontal surface and film boiling on a horizontal cylinder.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.232-239
• /
• 2001

The present study is an experimental investigation of nucleate boiling heat transfer mechanism in pool boiling from wire heaters immersed in saturated FC-72 coolant and water. The vapor volume flow rate departing from a wire during nucleate boiling was determined by measuring the volume of bubbles, varying $25{\mu}m,\;75{\mu}m,\;and\;390{\mu}m$, from a wire utilizing the consecutive-photo method. The effects of the wire size on heat transfer mechanism during a nucleate boiling were investigated by measuring vapor volume flow rate and the frequency of bubbles departing from a wire immersed in saturated FC-72. One wire diameter of $390{\mu}m$ was selected and tested in saturated water to investigate the fluid effect on the nucleate boiling heat transfer mechanism. Results of the study showed that an increase in nucleate boiling heat transfer coefficients with reductions in wire diameter was related to the decreased latent heat contribution. The latent heat contribution of boiling heat transfer for the water test was found to be higher than that of FC-72. The frequency of departing bubbles was correlated as a function of bubble diameters.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.2
• /
• pp.242-251
• /
• 2014

The traditional food - jungkwa of Korea, is difficult to manufacture. In this study, jungkwa with carrots was made in a rice cooker to simplify preparation. The boiling times for red color, chewiness and overall acceptability of jungkwa with carrots in a rice cooker as compared to the traditional method were 135 minutes, 150 minutes, 165 minutes, 180 minutes and 195 minutes, respectively. The rice cooker produced a lower moisture content in jungkwa with carrots when cooked for a longer time period, whereas the sugar content increased significantly. The color value of jungkwa with carrots was reduced at a longer boiling time as compared to the traditional method, yellowness increased when boiling time was longer than 195 minutes, whereas it remained the same with the traditional method. The hardness of jungkwa with carrots increased and candied jungkwa's result increased significantly when the boiling time was longer than 165 minutes. The rice cooker created a similar chewiness even when boiling time was over 165 minutes, although not consistently. The sensory evaluation scores of jungkwa made with carrots in terms of appearance, smell, taste, texture and overall preference were highest at 150 minutes and 165 minutes. Boiling jungkwa for 150 minutes in the rice cooker is the traditional method which simmers jungkwa at a lower timethan the preference time. Therefore, the best time for boiling jungkwa in the rice cooker highest was 165 minutes. After storage for 15 days chewiness and moisture content of jungkwa made with carrots at different boiling times, increased and decreases respectively. Therefore, the rice cooker can used to achieve comparable jungkwa without the traditional method.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.6
• /
• pp.875-885
• /
• 2022

This study was performed to confirm the optimal extraction method for antimicrobial peptides from the Hard-shelled mussel. Extractions were performed with two processes including 1% HAc/boiling and 1% HAc/non-boiling methods and used extracts for the comparison of the antimicrobial activity, protease stability, action mechanism, AU-PAGE (acid-urea PAGE), and HPLC chromatograms. 1% HAc/boiling extract showed potent antibacterial activities both against Gram-positive and negative bacterium but 1% HAc/non-boiling extract showed antibacterial activity only against Gram-positive bacteria. Treatment of 1% HAc/boiling extract with proteases retained almost antibacterial activity against B. subtilis, but abolished significant antibacterial activity against E. coli D31. Only 1% HAc/boiling extract showed two discrete clearing antibacterial zones including slow migrating and rapid migrating zones. Both extracts showed strong DNA-binding ability but did not show bacterial membrane permeabilizing ability. In comparison of the chromatogram obtained from C₁₈ or cation-exchange HPLC, the eluted peaks from 1% HAc/boiling extract showed high hydrophobic property or absorbance compared to 1% HAc/non-boiling extract, respectively. The concentration of the purified antimicrobial peptide was also higher in 1% HAc/boiling extract than in 1% HAc/non-boiling extract. Our results suggest that the effective extraction condition for antimicrobial peptides from marine invertebrate is boiling process in a weak acetic acid solution (1%).

• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.93-103
• /
• 1998

The nucleate boiling heat transfer experiments are performed using a ternary refrigerant R407C which is a candidate of alternatives of HCFC 22. The boiling phenomena of R-32, R-125 and R-134a which are the constituent refrigerants of R407C are also investigated. The nucleate boiling heat transfer coefficients of R407C are less than those of HCFC 22 which have the similar physical and transport properties. In our experimental pressure range, which is similar to the operational pressure of air conditioning system, the deterioration of boiling heat transfer coefficients of mixture refrigerant R407C does not appear for moderate wall superheat region. Since nucleate boiling heat transfer coefficients cannot be obtained from ideal mixing law of mixture, Thome's method was used to predict. To account for the heat flux effect and system pressure in Thome's method, the correcting factor, a(P.L1T), was introduced and obtained from experiments for ternary refrigerant R407C.

• Culinary science and hospitality research
• /
• v.9 no.2
• /
• pp.85-97
• /
• 2003

This study is an attempt that Rheology changes are occurred by boiling, frying, and boiling potatoes with soy bean sauce. Three different methods are tested for chemical analysis, fine potato starch grain structural change, sensory evaluation. 1) Alkaline number and acidity number are changed (+)2.17 in raw, decreased (+)1.76 by boiling, increased (+)2.38 by frying, and (-)2.22 by boiling with soy bean sauce. 2) Potatoes are completely dissolved into the gelatinization when they are boiled at 10$0^{\circ}C$ for 15minutes(PB III), fried at 18$0^{\circ}C$ for 3 minutes(PF IV), and boiled with soy bean sauce l0$0^{\circ}C$ for 30 minutes(PS III). 3) The pectin content ratio is decreased according to frying (31.78$\mu\textrm{g}$/$m\ell$), boiling(44.20$\mu\textrm{g}$/$m\ell$), boiling soy bean sauce(36.37 $\mu\textrm{g}$/$m\ell$), Hemicellulose content ratio is decreased according to frying(1.19%), boiling(1.17%), boiling soy bean sauce(0.92%). And the contend of cellulose and lignin is still regardless of any cooking method. 4) The sensory evaluation conducted by 30 university students as panelists showed that there are more significant differences among four samples in appearance, flavour, texture. As a result, the optimum cooking condition for potatoes is that potatoes are boiled l0$0^{\circ}C$ for 15minutes, fried at 18$0^{\circ}C$ for 3minutes, and boiled with soy bean sauce at 1$0^{\circ}C$ for 30minutes.

• Journal of Mechanical Science and Technology
• /
• v.15 no.7
• /
• pp.931-940
• /
• 2001

A numerical method for simulating bubble motion during nucleate boiling is presented. The vapor-liquid interface is captured by a level set method which can easily handle breaking and merging of the interface and can calculate an interfacial curvature more accurately than the VOF method using a step function. The level set method is modified to include the effects of phase change at the interface and contact angle at the wall as well as to achieve mass conservation during the whole calculation procedure. Also, a simplified model to predict the heat flux in a thin liquid microlayer is developed. The method is applied for simulation of a sliding bubble on a vertical surface to further understand the physics of partial boiling. Based on the computed results, the effects of contact angle, wall superheat and phase change on a sliding bubble are quantified.