• The Journal of Internal Korean Medicine
• /
• v.12 no.2
• /
• pp.52-58
• /
• 1991

Review of literature on the symptoms of sweat. According to comparative studies of oriental and occidental medical literature on the symptoms of sweat, following results were obtained. 1. oriental medicine 1) time: ja han (自汗), do han (盜汗) 2) body : du han (頭汗), su jog han (手足汗), sim han (心汗), eum ban (陰汗) pyun hang (偏汗) 3) kan (肝) : hwang han (黃汗), sim(心) : sin han (心汗), hyul han(血汗), bee (脾) : sig hu han (腎虛汗) sin(腎) : eum han (陰汗) By the study of the oriental medical literature, sweat were concerned with physiological function and pathological transformation of the body, 2. occidental medicine 1) NO sweat of the whole body 2) NO sweat of the part 3) much sweat of the whole body, 4) much sweat of the part. By the study of the western medical literature, sweats were tiny reaction of the· nerve and the mind.

• Journal of the Ergonomics Society of Korea
• /
• v.22 no.1
• /
• pp.57-67
• /
• 2003

The resonance behaviour needs be understood to identify the mechanisms responsible for the dynamic characteristics of human body, to allow for the non-linearity when predicting the influence of seating dynamics. and to predict the adverse effects caused by various magnitudes of vibration. However, there are currently no known studies on the effect of vibration magnitude on the transmissibility to thoracic or lumbar spine of the seated person. despite low back pain(LBP) being the most common ailment associated with whole-body vibration. The objective of this paper is to develop a proper mathematical human model for LBP and musculoskeletal injury of the crew in a maritime vehicle. In this study, 7 degree-of-freedom including 2 non-rigid mass representing wobbling visceral and intestine mass, is proposed. Also. when compared with previously published experimental results, the model response was found to be well-matching. When exposed to various of vertical vibration, the human model shows appreciable non-linearity in its biodynamic responses. The relationships of resonance for LBP and musculoskeletal injury during whole-body vibration are also explained.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.6
• /
• pp.965-977
• /
• 2021

The study aimed to analyze the functional differences in 3D virtual garment programs and compare body scan data with the corresponding 3D virtual models. We selected 3D virtual garment programs, formed virtual models in a representative size for high-school male cyclists, and analyzed them using the Design-X program. The results were as follows. In the 3D virtual garment programs, the anthropometric items for virtual model forming differed significantly from the standard anthropometric items suggested by Size Korea. Comparing the lower body scan data and virtual models formed by the 3D virtual garment programs, the biggest difference was in the shapes of the waist and hips, i.e., the flatness values of the waist and hips were different for each program in the cross-section view. In the lower body, a data-input-based program was needed for changing the exact measurement position of the waist circumference and hips' shape in detail. If a 3D virtual garment program provides functions for the virtual model's joint angle input and free motion transformation, it is expected to be widely used in the sportswear industry.

• Journal of architectural history
• /
• v.13 no.2 s.38
• /
• pp.21-38
• /
• 2004

This study provides a descriptive and analytical account of major aspects of urban development and transformation of housing types of Italian Firenze from the 13th century to the 19th century. It is a typo-morphological depiction of urban spatial structure of the extraordinary city, Firenze, the center of Italian Renaissance. And this study has proceeded on the assumption that the evolving form of the urban structure and housing types cannot be understood without reference to the larger context of political, economic, and social life. Based on these backgrounds, the purpose of this study is threefold: to provide a comprehensive discussion of general characteristics of urban spatial structure of Firenze, and to explain the process of formation of working-class neighborhoods by constructing new city wall in later 13th century, and to discuss transformation of housing types of the working-class neighborhood with understanding the mechanism of existence of housing in the newly formed residential neighborhoods. The development of residential neighborhoods was pursued by 'planned' manner through forming square-shaped blocks, and characterized by the subdivision of larger properties into standardized building lots for the construction of houses. On the bases of documentary evidences, several ecclesiastical institutions are identified as the agents of a distinctive type of development. While the institutions did the major role for developing lands, the construction of houses was done by small scale construction agents with moderate amount of properties. The major housing type of working-class neighborhoods of Firenze has been the 'casa a schiera' characterized by the form of narrow front and long depth. The type was generalized by the newly formed middle and working-class of Firenze which grew their body very rapidly, Even though the type assumed very uniform in its fen there were many variations. And through passing time, the casa a schiera developed to be multi-family housing, and the level of variation became deepen. Eventually, transformation of housing type of Firenze was ended by appearance of the 'casa in linea', which was very similar to modern apartment in its spatial organization.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.61.2-61
• /
• 2001

The purpose of the initial alignment of a SDINS is to get a coordinate transformation matrix from the body frame to the navigation frame. The initial alignment is one of the most important processes in the navigation system since its error has a large influence on the navigation solution. In this paper, a real-time initial alignment algorithm for the SDINS is developed using the Kalman filter. The steady state error analysis is performed for the developed Kalman filter technique and the gyrocompass loop method. The performance of the developed alignment method is compared with the gyrocompass loop method through the real-time alignment experiments.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.1
• /
• pp.65-73
• /
• 1997

The floating body discussed in this study is a 2-D rectangular floating unit supported by four vertical piles at its corners. Structures of this type are frequently seen as floating piers for the crafts in a small harbour. The movement in some modes of motion of such a flating body is fully or partially restrincted by the piles. The authors(Kim et al. 1994) carried out a series of model tests on its wave control function, its motion and the loads on piles. The experimental results showed that a certain degree of intial constriction force which clamps the floating unit in the horizontal direction can effectively reduce the body motion and wave energy without increasing mooring forces. This may be due to the friction forces occuring between the piles and the rollers installed in the mooring equipments on the floating unit. In this paper, we develop a numerical model for the prediction of wave transformation and floating body motions, where the friction force is idealized as the Coulomb friction and linearized into a damping force using the equivalent damping cofficient. This linearization is verified by comparing the results of motions between the linear and nonlinear analysis of the ezuations of motion. We further compare the caculation results by the linear model with the experimental results and discuss the effect of the friction force or the constriction force on body motions and wave energy dissipation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.66-70
• /
• 2001

The purpose of this paper is to investigate the characteristics of springback for the U-bending of steel sheets for automotive body panels. This study presents the experimental and analytical approach for the two kind of steel sheets, namely SCP1 and TRIP(Transformation-induced plasticity), the newly developed high strength steel. The adopted thicknesses are 0.8, 1.2 and 1.6 mm for SCP1, and 1.0 mm for TRIP. The punch profile radii are designed in 3, 6, 9, 12, and 15 mm. As results, the springgo aspect could be observed experimently in the small punch profile radius. The degree of springback for TRIP sheets was more than the SCP1 sheets.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.2
• /
• pp.197-207
• /
• 2005

The purpose of this study was to investigate the body segment kinematics by lap time during men's 5,000m racing. The subjects in this study were 4 male athletics who take part in the competition. The two dimension motion analysis with DLT(direct linear transformation) method was executed using digital video cameras. The following conclusion was that : It was shown that top ranking in a competition is continuous race pattern and the last Lap time is the most fast. It was shown that top ranking in a competition is continuos the stride length and it was the largest in the last Lap time. It was shown that according to the passing Lap time trunk frontal angle was decreasing and shoulder angle was continuous.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.8 no.2
• /
• pp.75-86
• /
• 2004

In this study, a recursive algorithm for generating the equations of motion of a chain of rigid rods is presented. The methods rests upon the idea of replacing the rigid body by a dynamically equivalent constrained system of particles. The concepts of linear and angular momentums are used to generate the rigid body equations of motion without either introducing any rotational coordinates or the corresponding transformation matrices. For open-chain, the equations of motion are generated recursively along the serial chains. For closed-chain, the system is transformed to open-chain by cutting suitable kinematic joints with the addition of cut-joints kinematic constraints. An example of a closed-chain of rigid rods is chosen to demonstrate the generality and simplicity of the proposed method.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.5
• /
• pp.310-311
• /
• 2009

Synovial chondromatosis is an uncommon disease of cartilage transformation of synovial membrane with formation of loose bodies within the joint space. The involvement of temporomandibular joint is very rare. Symtoms include swelling, pain, stiffness of the jaw, and inability to close the jaw. A case involving the temporomandibular joint(TMJ) and non-symptoms is presented.