• Journal of the Ergonomics Society of Korea
• /
• v.21 no.1
• /
• pp.33-49
• /
• 2002

With the wide range of movement, the movement of neck accompanies the body surface change of neck and shoulders. And neck corresponds to the collar of garment, meaning that the body surface change of this part affects the construction of patterns for collars. So the purpose of this study was to manifest the changes of body surface in the neck and shoulder accompanied with the movement of the neck and to draw up the facts worth consideration when constructing the collar pattern. In this study, the draft of body surface of neck and shoulder was drawn up by gypsum method according to the 5 movements (standing at attention, neck bending - front, back, right, left). The length of body surface was measured and analyzed by ANOVA, post hoc test, correlation and regression analysis using SPSS 10.0 for Windows. The variation of the surface of neck was remarkable in the vertical lines than the horizontal ones. So the height of collar should be established considering the range of movement of the neck. It was the raising amount of c.f(center front) of neck and girth of neckbase (back) that were proved to have significantly varied after movement. With correlation analysis done, in every movement, the raising amount of side and the girth of neckbase had remarkably positive relation. The movement of the neck accompanied the variation of body surface in the shoulder as well. It was the part of scapula and side of neckbase that the variation was notable, suggesting that the surplus is needed in these parts.

• The Research Journal of the Costume Culture
• /
• v.13 no.3 s.56
• /
• pp.439-451
• /
• 2005

This study was to provide the fundamental data for the ease necessary to design clothes by investigating the variation of the upper body surface with the method of surgical tape. The subject were 8 young women in the standard somatotype. In the form of body surface according to arm movements, the shape of armscye circumference became gentle from the sunken form for the standing posture; scye depth became lower; lateral shoulder moved and rose toward the front center as the angle of arm movement became larger; scye depth is greatest in the standing. The items of horizontal ware largest in the standing posture except for front neck base circumference and front interscye breadth for side $90^{\circ}$ movement. In the items of vertical, while most of the front items increased but back ones generally decreased for all movement compared to the standing. After comparing differences in actual values between the form of body surface in the standing posture and the direct measurement, the following ease were suggested considering minimum measures to accommodate daily movements. Bust circumference/2 = 3cm; waist circumference/2 = 1.5cm; front interscye breadth/2 = 0.6cm; back interscye breadth/2 = 0.6cm; and underarm depth = 1.5cm

• Journal of the Korean Home Economics Association
• /
• v.26 no.2
• /
• pp.1-13
• /
• 1988

The purpose of this study was to classify somatotype of males, to show changes of the body skin surface by the somatotype. The size of sample was 156 males between age 20 and 24. Somatotype classified into Bending somatotype, Standard somatotype, Turning over somatotype. And according to the somatotype, changing of the upper part of the body by the arm movements analyzed through gypsum experiment. The result obtained from this study were as follows; 1. the variation of the upper part of the body form by changing the am movements, by the increasing of movements, shoulder-point ws moved to be inside or upside, the anterior armpit point & armpit point were moved to the upside. 2. As a result of investigating into the rate of the expansion and contraction of the basic lines and body surface area by the arm movements, the rate of expansion and contraction of the basic lines by the arm movements, the side sea length showed the maximum rate of extension in 135 degrees, the shoulder length showed the maximum rate of contraction in 135 degrees. The rate of expansion and contraction on the body surface area by the arm movements showed the phenomenon of contraction, of items F1, F6, B1, B9 showed the phenomenon of extension, of items F3, F4, F8, F9, B8, B9. 3. According to somatotypes, items which show the significant difference were, of items f3, f8, b3, b8, F2, F7, F8, B3, B7, in all movements.

• Journal of the Korean Society of Costume
• /
• v.55 no.5 s.95
• /
• pp.87-100
• /
• 2005

This study was to provide the fundamental data for a scientific and rational clothing construction by investigating the length variation of the upper body surface, using the method of surgical tape. The subjects were 15 early elementary schoolgirls in Busan area classified by three somatotypes, Arm-movements were consisted of 6 types. The statistical analyses used in this study were mean, standard deviation and the ANOVA and LSD procedure. The results of the analysis of the length of the upper body surface are as follows: By arm-movements, in the items of horizontal, front neck base girth, back upper bust girth, back bust girth and back under bust girth were increased and the other standard lines were apt to be decreased. In the items of vertical, all standard lines of front side and side seam length showed increased, the lines of bark side were apt to be decreased. The shoulder length represented the maximum rate of decrease($-36.59\%{\~}-48.98\%$) in M6($180^{\circ}$) and the side seam showed the maximum rate of increase($49.74\%{\~}59.22\%$) in the same movement.

• Fashion & Textile Research Journal
• /
• v.4 no.2
• /
• pp.137-144
• /
• 2002

This study was to provide the fundamental data for a scientific and rational clothing construction by investigating the variation of the upper body surface with the use of the method of Surgical tape. The subject were 3 middle elementary schoolboys classified standard somatotype, and arm-movements were consisted of 6 types. The statistical analyses used in this study were mean, standard deviation and the ANOVA and LSD procedure. Shoulder point was moved to be the inside or upside and the shape of the armhole-line was differently changed as the arm-movement become larger. By moving to upside of the anterior armpit point, posterior armpit point and armpit point, the increase of the side seam length and the ascent of the line of width between armpits were distinct. And by arm-movements, in the items of horizontal, front neck base girth, back upper bust girth, back bust girth and back waist girth were increased and the other standard lines were apt to be decreased. In the items of vertical, all standard lines of front side and side seam length showed increased, back waist length and back length showed decreased. The variation of armhole was indefinite. In the rate of the variation, the shoulder length showed the maximum rate of contraction by 41.3%, decreasing 3.7 cm in $180^{\circ}$ degrees, and the side seam length showed the maximum rate of expansion by 60.6%, increasing 8.97 cm in the same degrees.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.799-809
• /
• 2020

In this study, the supercavitating flow of a high-velocity moving body near air-water surface is calculated and analyzed based on a commercial CFD software ANSYS Fluent. The effect of regular wave parameters including both wave height and wavelength on the cavitating flow and force characteristics of a body at different velocities is investigated. It is found that the cavity shape, lift coefficient and drag coefficient of the body vary periodically with wave fluctuation, and the variation period is basically consistent with wave period. When the wavelength is much greater than the cavity length, the effect of wave on supercavitation is the alternating effect of axial compression and radial compression. However, when the wavelength varies around the cavity length, the cavity often crosses two adjacent troughs and is compressed periodically by the two wave troughs. With the variation of wavelength, the average area of cavity shows a different trend with the change of wave height.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.45.1-45.1
• /
• 2018

We present observational evidence of the surface homogeneity on Phaethon based on the time-series multi-band photometry and spectrometry. The observations of Phaethon were conducted in Nov.-Dec. 2017. We confirmed that Phaethon is a B-type asteroid, as was previously known, and its rotational color variation was not detected. During our observation period, the sub-solar latitude of this asteroid was approximately $55^{\circ}S$, corresponding to the southern hemisphere of the body. Thus, we found that the southern hemisphere of Phaethon has a homogeneous surface from our observation results. In addition, we compared our spectra with archival data to investigate the latitudinal surface properties of the asteroid. The result showed that it doesn't have a latitudinal color variation. To verify this assumption, we investigated its solar-radiation heating effect, and the result suggested that this asteroid underwent a uniform thermal metamorphism regardless of latitude, which is consistent with our observations. Based on this result, we discuss the homogeneity of the surface of the body.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.1
• /
• pp.97-109
• /
• 2014

This study developed a functional dress shirt for adult males that reflected the body surface variation of a human body section by motion. This study conducted a 3D body scan for 8 subjects in their 40's based on the Size Korea 2010 database. Data recorded the proper posture change value and body surface change value to develop functional dress shirts for adult males. We scanned the subjects with a 3D body scanner for five primarily male wearing dress shirts and operating postures, right standing, arms raised to $90^{\circ}$ horizontal forward position, arms raised $90^{\circ}$ to the horizontal position side, lift up the arm $180^{\circ}$, and arm forward $90^{\circ}$ in a bent posture. We analyzed the 3D scan data from those motions to examine change of length using 3D software Rapidform XOS. The results indicated that the body surface sections with contraction were the front and rear shoulder area, armpit and central length as well the width of arms at more than 10%. The increased body section included the body and armpit back length; in addition, the rear arm vibration girth and under arm girth were more than 10%. In order to reflect the size variation of for each motion, the ease amount of the front and rear shoulder length and width needs to be reduced 20% because it affects the shoulder length during the right standing. The results suggest that the ease amount of the shoulder length should be minimal. The ease amount of the back size needs to be 0.5-2cm bigger and set 0.5-1.5cm longer than the dress shirt length side drooping to compensate for the side length shortage of each motion. The sleeve length needs to be 0-0.5cm shorter, and ease amount of the girth of sleeve bottom needs to be reduced 0-0.7cm due to the size variation of arms. However, the girth of the rear arms is suggested to be 0-0.6cm longer in the ease amount to the rear arm girth as the extension is more than 10% over the width and length of each motion.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.395-406
• /
• 2011

In this research a numerical simulation method is developed for moving body in free surface flows using fixed staggered rectangular grid system. The non-linear free surface near the body is defined by marker-density method. The body boundary is defined by line segment connecting the points where the body surface and grid line meet. Continuity equation and Navier-Stokes equations are used as governing equations and the equations are coupled with two-step projection method. The velocities and pressures of body boundary and free surface cells are calculated with simultaneous iterative method. To treat a body movement in a fixed grid system, the volume displaced by moving body is added to the divergence of the body boundary cell. For the verification of the present numerical method. vortex shedding period of advancing cylinder is calculated and the period is compared with existing experiment results. Moreover, added mass and damping coefficients of a vertically excited box are calculated and the computed results are compared with published experiment results. Impulsive pressure and water level variation due to sloshing phenomenon are simulated and the results are compared with published experiment results. Varying the plunger shape, the waves generated by plunging type wave maker are compared with the 2nd order Stokes wave theory The plunger shape generating the wave that shows the best agreement with the theory is represented.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.36-39
• /
• 2000

A small electrical potential difference which appears on any solid body when subjected to illumination by a modulated light beam generated by laser is called photocharge voltage(PCV)[1,2]. This voltage is proportional to the induced change in the surface electrical charge and is capacitatively measured on various materials such as conductors, semiconductors, ceramics, dielectrics and biological objects. The amplitude of the detected signal depends on the type of material under investigation, and on the surface properties of the sample. In photocharge voltage spectroscopy measurements[3], the sample is illuminated by both a steady state monochromatic bias light and the pulsed laser. The monochromatic light is used to created a variation in the steady state population of trap levels in the surface and space charge region of semiconductor samples which does result in a change in the measured voltage. Using this technique the spatial variation of PCV can be utilized to evalulate the surface conditions of the sample and the variation of the PCV due to the monochromatic bias light are utilized to charactrize the surface states. A qualitative analysis of the proposed measuremen is present along with experimental results performed on amorphous silicon samples. The deposition temperature was varied in order to obtain samples with different structural, optical and electronic properties and measurements are related to the defect density in amorphous thin film.