• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.623-630
• /
• 2007

Grouting materials are used for the unification of superstructural and substructural body like bridge seat (shoe) or machinery pedestal and e.t.c by filling their intercalary voids. Accordingly, grouting materials have been developed and used mainly with products of high strength because those materials are constructed specially in a part receiving large or impact load. In this situation, the structural body constructed by grouting materials with high stiffness-centered (caused by high strength) products is apt to cause brittle failure when receiving over a limit stress and to cause cracks according to cumulative fatigue by continuous and cyclic load. In addition, grouting materials are apt to cause cracks by using too much rapid hardening agents that give rise to high heat of hydration to maintain high strength at early age. In this study, to overcome these problems, cement type grouting materials including powder of waste tire and resin as elastic materials which aim to be more stable construction and to be improvement of mother-body's unification are developed and endowed with properties of high toughness and high durability add to existing properties of high flowability, non-shrinkage and high strength. Besides, this study contribute to of for green construction materials for being possible recycling industrial waste like waste tire and flyash. On the whole, seven type mixing conditions are tested and investigated to choose the best mixing condition.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2003.11a
• /
• pp.15-23
• /
• 2003

Interest in the regulation of body weight and the pathological physiology of obesity has been rekindled by the cloning of the obese(ob) gene and identification of its product, leptin, in 1994. The first publication appeared in Nature and is a milestone of obesity research. The remarkable metabolic effects of leptin in rodents are: a) inhibition of food intake, b) stimulation of energy expenditure, and c) reversal of obesity. These effects, though mostly desirable, have not been fully demonstrated in humans. The central action of leptin in the regulation of body weight includes two pathways in rodents: a) When the body weight increasing, more leptin is secreted from adipose tissue, which acts on hypothalamus, probably through a POMC or MSH pathway via M4 receptor, initiates a series of response to obesity, i.e. sympathetic tone increased, energy expenditure enhanced and food intake reduced. b) When body weight reduced, leptin concentration decreased with the shrinkage of fat mass, which may also act on the hypothalamus, probably through a NPY-Y5 receptor pathway. Then a cascade of response to hungry was induced, i.e. increase of parasympathetic tone and food intake, decrease of energy expenditure and body temperature, as well as shut-down of the reproductive function.

• Journal of the Korean Ceramic Society
• /
• v.32 no.2
• /
• pp.227-233
• /
• 1995

By using homestyle microwave oven, Al-Al2O3 powder mixture could be oxidized and sintered into Al2O3 body. The differences in powder characteristics among the differently processed raw materials affect the oxidation and sintering behaviours, and these effects were more pronounced in case of microwave oven than of conventional furnace. Al-Al2O3 powder mixture was oxidized and sintered within 2hrs, which could save both processing time and energy.

• Journal of the Korean Ceramic Society
• /
• v.31 no.11
• /
• pp.1265-1270
• /
• 1994

Ultra-fine hydroxyapatite powder were synthesized by the hydrothermal reaction at 10 atm, 3 hrs of Ca(OH)2 suspension with (NH4)2HPO4 solution, and were characterized sintering behavior. Sintered bodies of hydroxyapatite powders which synthesized by hydrothermal reaction method has less weight loss, less sintering shrinkage and superior mechanical property, and was more dense than sintered bodies of hydroxyapatite powder which synthesized by wet method. Sintered bodies were hydroxyapatite single phase. When soack in Ringer's solution for 2 weeks, hydroxyapatite powders preserved hydroxyapatite and sintered body absorbed trace of Ca2+ ion with soaked time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.2
• /
• pp.97-102
• /
• 1990

A procedure to standardize camel carcass fabrication is proposed. This includes a definitive method of jointing the carcass into wholesale neck, shoulder, brisket, rib, plate, loin, flank, rump and leg cuts. Carcass cutout data were collected from the right sides of 21 Najdi male camels averaging 8, 16 and 26 months of age in order to determine the influence of age on the weight of each wholesale cut. The weight of body, empty body, hot carcass, cold carcass, hump fat, kidney, pelvic and heart fat (KPH) and each wholesale cut increased (p < .01) with age. Except for percent shrinkage and wholesale rump weight, all studied traits increased (p < .01) linearly as the age increased. This change was most pronounced in wholesale flank and plate cuts, increasing by 4.2 and 3.4 times, respectively, while the rump and shoulder cuts changed the least, increasing by 1.8 and 1.9 times, respectively. Allometric growth coefficients indicated that as the camel grew, the weight of rib, brisket, plate and flank cuts increased relatively more rapidly than did cold carcass or empty body weight and that the weight of wholesale shoulder, neck, leg and rump increased less rapidly than did cold carcass or empty body weight.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.548-553
• /
• 2009

This study is on the application of ceramic body and art glaze by using coal ash according to each wt%. Body color was turned red and dark as increasing coal ash contents in the body and art glaze because of the effect of noncombustible carbon in $Fe_2O_3$ and coal ash. Not only pore and black core were generated but also absorptance and shrinkage were increased as increasing coal ash contents. The glaze of coal ash 20 wt% showed blue absorption band, turned red band as increasing coal ash contents, $Al_2O_3\;to\;SiO_2$ ratio got lower and became mat because glaze is estranged from $Al_2O_3\;to\;SiO_2$ mol ratio 1:10 of transparent glaze as increasing coal ash contents. Glaze showed unstable dissolving condition in the more coal ash contents.

• Geomechanics and Engineering
• /
• v.13 no.5
• /
• pp.881-892
• /
• 2017

Design and management of concrete slabs in concrete-faced rock-fill dams are crucial issues for stability and overall dam safety since cracks in the concrete face induced by stress, shrinkage, and deterioration can cause severe leakage from the reservoir into the dam. Especially, the increase of dam height to a certain level to enhance the storage capacity and to improve hydraulic stability can lead to undesirable deformation behavior and stress distribution in the existing dam body and in the concrete slabs. In such conditions, simulation of a concrete slab with a numerical method should involve the use of an interface element because the behavior of the concrete slab does not follow the behavior of the dam body when the dam body settles due to the increase of dam height. However, the interfacial properties between the dam body and the concrete slab have yet to be clearly defined. In this study, construction sequence of a 125 m high CFRD in South Korea is simulated with commercial FDM software. The proper interfacial properties of the concrete slab are estimated based on a comparison to monitored vertical displacement history obtained from the concrete slab. Possibility of shear strength failure under the critical condition is investigated based on the simplified model. Results present the significance of the interfacial properties of the concrete slab.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.31-41
• /
• 2020

We studied the anisotropic shrinkage and deformation characteristics of large size sintered bodies in the manufacturing of glass-ceramic composite wasteform. We used uranium-bearing waste, generated from the treatment of spent uranium catalyst. Sintered specimens were prepared in several forms, comprising a circular disk, and a quarter disk in several diameters of up to 40 cm. Regardless of form or size, the sintered bodies had high isotropic shrinkage when they were fabricated using green bodies prepared at 60 MPa. The average anisotropy rate and average shrinkage rate were 1.6%, and 37.4%, respectively. We confirmed that the glass-ceramic composite wasteform in a large scale disk-type for packing in a 200 L drum could be fabricated with a tolerable anisotropy shrinkage. This has resulted in a significant reduction in the volume of radioactive waste to be disposed of with highly stable wasteform.

• Journal of the Korean Ceramic Society
• /
• v.19 no.2
• /
• pp.95-100
• /
• 1982

Instead of barium carbonate, domestic barite was used as the flux in manufacturing theinsulating porcelain. To avoid the problems arising from the decomposition of barite in the body during firing, BaO.$Al_2O_3$ was synthesized at $1300^{\circ}C$ for 5 hours. synthetic BaO.$Al_2O_3$ was mixed with other materials such as kaoline, alumina, clay, dolomite. The RO content (CaO. MgO. BaO) of the batches was varied from range of 4 to 14wt. % at 2wt. % - intervals, and firing temperature was varied from 1280 to 140$0^{\circ}C$-at 4$0^{\circ}C$ intervals The properties such as water absorption, bulk density. mechnical strength, specific resistance, and linear shrinkage were measured. The body containing 12 wt.% of RO content showed the satisfactory for the application in the Fixed Carbon Film Resistor.

• Journal of the Korean Ceramic Society
• /
• v.14 no.4
• /
• pp.215-225
• /
• 1977

In this study, we are observe to the sagger which is composed of cordierite-mullite system. And especialy, we investigated the characteristics of the body which composed of Chamotte-Kaolin-Plastic clay-Talc (or Clinochlore) system and Chamotte-Kaolin-Plastic clay-Agalmatolite-Talc (or Clinochlore) system. The obtained results are as follows. 1. Modulus of rupture and apparent porosity were improved by particle size of talc and clinochlore in order that -16 mesh, -6 mesh, 6-16 mesh. 2. When the body composed of talc, the modulus of rupture was increased as firing temperature was rising up but composed of clnochlore, it was reversed. 3. When added to the agalmatolite, firing shrinkage, modulus of rupture and apparent porosity were improved. 4. Mineral phases of samples fired at 125$0^{\circ}C$ above consist of cordierite, mullite and $\alpha$-cristobalite.