• Journal of Korean Society on Water Environment
• /
• v.35 no.2
• /
• pp.99-104
• /
• 2019

The objective of this study was to investigate the relationship between the biomass of cyanobacteria and the concentration of 2-methylisoborneol (2-MIB) in the lower Gongji stream. The investigation was done using a field study that was conducted from 2015 to 2017. The 2-MIB concentration in the lower Gongji stream ranged from 0 to 153 ng/L, while the upper stream had 0 2-MIB concentration. 3 genera (Oscillatoria, Phormidium, Pseudanabaena) of cyanobacteria were detected in the lower Gongji stream with 2-MIB concentration. Among these 3 genera, an increase in Phormidium, Pseudanabaena biomass was associated with an increase in 2-MIB concentration. Accordingly, Phormidium, Pseudanabaena were regarded as the biological source of 2-MIB in that area. In October 2017, although planktonic cyanobacteria occurred less frequently, many benthic cyanobacteria mats were observed on the surface of the water body. Therefore, the high 2-MIB concentration, which exceeded 110 ng/L, can likely be attributed to the benthic cyanobacteria. In a laboratory experiment, individual Oscillatoria filaments were aggregated to form a colony with a higher density. This colony tended to float on the water surface. Cyanobacteria mats after floating aggregated mats were distributed in a net shape on the bottom.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.4
• /
• pp.281-288
• /
• 2020

BACKGROUND: Generally, ammonia occurs from agricultural waste disposal. Ammonia is known as a harmful substance to the human body and has a bad influence such as eutrophication on the ecosystem. It is possible to remove the ammonia by ammonia adsorption method using natural zeolite, without external influence. However, due to the natural zeolite shape, it is hard to reuse. METHODS AND RESULTS: Electrospinning method can produce fiber with constant diameter. Moreover, electrospinning method has no limitation for selecting the material to make the fiber, and thus, it is valuable to reform the surface of adsorbent. In this study, reusable membrane was made by electrospinning method. The highest removal efficiency was shown from the membrane with 20% of zeolite included, and it has been verified that it is possible to reuse the membrane through chemical treatment. The highest ammonia removal efficiency was about 92.4%. CONCLUSION: In this study, ammonia adsorption characteristics of zeolite fibers were studied. Electrospinning method can produce zeolite fiber with even distribution. Ammonia can be removed efficiently from ion exchange ability of the natural zeolite. The result of adsorption isotherm indicated that both Freundlich model and Langmuir model provided the best fit for equilibrium data. And study on desorption has demonstrated that the ion exchange from zeolite was reversible when 0.01 M NaCl and KCl solution were used.

• The Research Journal of the Costume Culture
• /
• v.28 no.6
• /
• pp.858-874
• /
• 2020

This study attempts to analyze the social and cultural meanings of the ethnic groups to which different types of shamans belong in Siberia from the appearance characteristics in terms of clothing through Roland Barthes's semiotic theory. The research method here is to analyze three types of shaman costume classified by Holmberg, which are bird-type, deer-type, and bear-type, through theoretical research and to investigate the analysis process of Roland Barthes's semiotics theory. Roland Barthes's approach to semiotics presents an analysis model that can explore the sociocultural meaning of the Siberian shaman costume. The research results are as follows. In the first type, to be closer to the god of the upperworld, shamans transform themselves into birds by decorating their costumes with the characteristic elements of birds such as feathers and wings. In the second type, the shamans' costumes are made of deerskin, and the headdress is shown in the shape of antlers to make it easier to receive messages from the upperworld and run fast in the underworld. In the third type, the shaman's costume is made of bearskin, the head is covered with bearskin, and the body is decorated with bear pendants. Through the power of the bear, the shaman is sent to the underworld to defeat evil gods and remove diseases. Shamans can show their particularity of being a demigod and non-binary gender through clothing. They use this to reflect their authority as a medium of communication between man and god.

• Fashion & Textile Research Journal
• /
• v.24 no.2
• /
• pp.249-259
• /
• 2022

To analyze recent changes in designer-specific garment composition, detail, and design elements of jackets, we classified jackets from the Paris Haute Couture Collection from 2000 S/S to 2019 F/W according to their designers and examined their characteristics. Our analysis of the jackets by Armani, Chanel, Dior, Jean-Paul Gaultier, and Valentino shows that the hour-glass silhouette was most common in Armani, Chanel, Dior, Jean-Paul Gaultier and Valentino jackets; Chanel used more straight silhouettes compared to other designers. Most jackets, regardless of the designer, had midlength waist-to-bottom, tight sleeves fitted to the body, natural shoulder shape, and solid color. Moreover, woven fabric was the most common material. Jackets with no collar were the most common for Armani, tailored collars for Dior and Jean-Paul Gaultier, and standing collars for Chanel and Valentino. For the closure method, Armani used hook-and-eye, Chanel, Jean-Paul Gaultier, Valentino used button closures, and Dior used snap closures the most. New design attempts by designers are bringing details and design elements together. In an era characterized by an abundance of designs and frequent replacement of each brand's creative designers, it is important to create and maintain a brand's unique design identity and philosophy that can meet consumers' elevated standards, which tend to be biased towards new and stimulating designs due to the development of the IT industry.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.1
• /
• pp.146-159
• /
• 2023

As a makeup technique for a baby-faced image, there will be a difference in perception of the expression technique of baby-faced makeup according to general matters.' Two hypotheses were supported: 'There will be a difference in perception of the expression technique of baby face makeup depending on the general characteristics', and the makeup technique for creating a baby face image is an important function for both men and women, as well as appearance. As a 'physical resource' for social activities, it was confirmed that there is an improvement in the efficiency of the body and mind and an outstanding improvement in mental ability in daily life. Through the results of the study on 'expression of baby face image makeup', awareness and interest in baby face images are high, but research on the production of baby face images is needed. The need for facial expression elements for baby face makeup is expected to be used as basic data for developing baby face images, and this study focuses on external face management for baby face images and baby face makeup.

• Transactions of Materials Processing
• /
• v.31 no.3
• /
• pp.129-135
• /
• 2022

The purpose of this study was to quantitatively evaluate the influence of hardness of tool materials on wear resistance in the sheet metal forming process. Punches used in the wear test were made of STD-11 and K340 tool material, and the tempering temperature was set to 530℃ and 500℃, respectively, to control the hardness of the tool materials. The punches mimic the shape of stamping tool of automotive body component to reflect its plastic deformation, and are designed to concentrate wear on the curvature region of punches. Progressive die and coil sheet were used to save time, cost, and raw sheet materials. By quantitatively measuring the wear depth of the punches, the wear behavior and mechanism of the punches were investigated, and characteristics of hardness and wear resistance according to tool materials and tempering temperatures were evaluated. Testing results indicate that the punch made of K340 tool steel with higher hardness had better wear resistance than that of STD-11 tool steel, and the hardness and wear resistance of tool steel were significantly impacted by the tempering temperature.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.1
• /
• pp.50-65
• /
• 2024

By analyzing the style of creator avatars in the world of Metaverse, which is emerging as a fourth-generation social media platform, this study aims to identify the meta-fashion tastes of Generation Z (Gen Z) creators (born in the late 2010s and early 2020s) and to analyze the extent to which current trends in the fashion market are influencing meta-fashion. The research method uses a case study to compare meta-fashion and current fashion trends. First, five Gen Z fashion creators on ZEPETO were selected to analyze the meta-fashion styles presented by this group. In the end, a total of 100 fashion styles were analyzed by combining 50 items each from the current meta-fashion and real fashion trends. The fashion styles were found to be hip-hop, easy-casual, punk, lovely feminine, and sexy, and the main fashion items were analyzed as jeans, hip-hop style pants, sneakers, tight crop tops, dresses, tattoos, chain accessories, and dyeing. Meta-fashion is the emergence of items similar in shape to those popular in the current fashion market, but are more exaggerated or show off the human body than actual fashion items.

• Clinical and Experimental Reproductive Medicine
• /
• v.50 no.4
• /
• pp.270-276
• /
• 2023

Objective: This study investigated the clinical and laboratory factors associated with the presence of dysmorphic oocytes in intracytoplasmic sperm injection (ICSI) cycles. Methods: The study involved 200 ICSI cycles, performed from 2020 to 2021, that yielded at least one mature oocyte. Clinical characteristics and ovarian stimulation methods were compared between 68 cycles with at least one dysmorphic oocyte (the dysmorphic group) and 132 cycles with normal-form oocytes only (the non-dysmorphic group). Dysmorphic oocytes were characterized by dark cytoplasm, cytoplasmic granularity, cytoplasmic vacuoles, refractile bodies in the cytoplasm, smooth endoplasmic reticulum in the cytoplasm, an oval shape, an abnormal zona pellucida, a large perivitelline space, debris in the perivitelline space, or an abnormal polar body. Results: The ages of the women, indications for in vitro fertilization, serum anti-Müllerian hormone levels, and rates of current ovarian endometrioma were similar between the dysmorphic and non-dysmorphic groups. In both groups, the three ovarian stimulation regimens, two types of pituitary suppression, and total gonadotropin dose were employed similarly. However, the dual-trigger method was used more frequently in the dysmorphic group (67.6% vs. 50%, p=0.024). The dysmorphic group contained significantly more immature oocytes and exhibited significantly lower oocyte maturity (50% vs. 66.7%, p=0.001) than the non-dysmorphic cycles. Within the dysmorphic group, significantly lower oocyte maturity was found in the cycles using a dual-trigger, but not in those with a human chorionic gonadotropin trigger. Conclusion: ICSI cycles with dysmorphic oocytes are closely associated with reduced oocyte maturity. This association was observed exclusively in dual-trigger cycles.

• Parasites, Hosts and Diseases
• /
• v.22 no.1
• /
• pp.85-95
• /
• 1984

This study was performed to investigate the intestinal parasites (especially cestoda) in the guts of Theragra chalcogramma in Korea. The cestode larvae collected were morphologically observed and measured, and at the same time, microscopical study was done with the section slides of the cestode larvae. They were identified on the basis of the descriptions by Schmidt and Yamaguti. The results obtained in this study are as follows: 1. The cestode larvae were identified as Khawia sinesis, Eulacistorhynchus chiloscyllius, Tentacularia coryphaenga, Pssudonybelinia odontasantha and Nybelinia Zingualis. These are new species reported in Korea. 2. The characteristics of Khawia sinesis are its scolex lacking loculi and broad, fat and fimbriate shape. Its neck is not separated from the body but a little constricted. 3. Eulacistorhynchus chiloscyzzius is characterized by fairly long and acraspedote scolex. The bulbs are long; retractor muscles are attached to bases of the bulbs. The two bothridia are oval or round in shape and lacking posterior notch. The tentacles are long and poeciloacanthus; double chainette present. 4. Tentacularia coryphaenea is characterized by its long craspedote and subcylindrical scolex. The bothridia are separated, without free borders and spinous. The tentacles are short, slender, armed with solid hooks in spirals, similar except the base of tentacle. The tentacle sheaths are not twisted. The bulbs are ellipsoidal. 5. Pseudonybelinia odontacantha is characterized by its craspedote scolex. The tentacles are inserted near anterior margin of bothridia and armed with hooks in spirals ascending left to right. The hooks are similar, throughout tentacle, with feeble curve and provided with a tooth-like protuberance on the ventral side. The bulbs are three times longer than its width. The posterior margins of bothridia have a pair of eversible ciliated pits; or fossettes. 6. Nybelinia lingualis is characterized by its short and craspedote scolex. The bothridia are separated, with free boarders. The tentacles are cylindrical, armed with solid and similar hooks in quincunxes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.600-608
• /
• 2017

The presence of piping in a levee body allows water seepage to occur by producing a large cavity or water tunnel within it, ultimately resulting in the failure of the river levee and differential settlement. In order to properly cope with river levee failure due to piping and establish a proper remediation method for this problem, it is necessary to analyze the failure mechanism of the river levee due to piping. Therefore, this study analyzed the shape and mechanism of river levee failure due to piping through small-scale and large-scale models and evaluated the seepage pressure distribution characteristics in the hydraulic well, which has been suggested as a remediation method for piping. According to the results of this study, as the safety factor for the piping in the river levee decreased, the river levee failure shape was more clearly shown through the small-scale model test. In the large-scale model test, the type of local damage to the levee due to the piping was identified and the evaluation showed that the hydraulic well had the largest effect on the inhibition of piping below the center of the well. A follow-up study is needed to confirm the reliability of the results. However, it is thought that this study can be utilized as the baseline data for research into the piping-induced river levee failure mechanism and for the preparation of a remediation method.