• Anxiety and mood
• /
• v.19 no.2
• /
• pp.77-82
• /
• 2023

Objective : During the coronavirus disease 2019 (COVID-19) pandemic, hospital avoidance had a significant impact on public health. We investigated the factors associated with hospital avoidance and explored practical strategies hospitals could employ to address this phenomenon. Methods : We conducted a patient experience survey in a general hospital in Korea during the COVID-19 pandemic. Between July 6, 2020, and July 20, 2020, a total of 842 patients who had previously visited hospitals before the COVID-19 outbreak participated. Self-reported hospital avoidance, factors associated with hospital avoidance, and satisfaction with the hospital's infection control policies were the main outcomes. Binary logistic regression analysis was used to identify associated factors. Results : Data indicated that 29.9% (n=252) of the respondents avoided visiting the hospital after the COVID-19 outbreak. Satisfaction with the hospital infection control policy (odds ratio [OR]=2.297, p<0.001), female sex (OR=1.619, p<0.05), and higher educational level (OR=1.884, p<0.001) were associated with hospital avoidance. The "entrance body temperature check" was the most satisfactory policy among the hospital's infection control policies. Conclusion : To manage hospital avoidance during an infectious disease crisis, targeted policies for at-risk groups and hospital policies to reassure and satisfy patients are needed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.3
• /
• pp.383-391
• /
• 2010

This study was performed to investigate the food habits, eating behaviors, perception of body shape, statuses of body weight control by BMI (Body Mass Index) of 732 middle school students in Gwangju and Jeonnam. The results of this study were compared among under weight (UW), normal weight (NW), and overweight (OW) groups according to BMI levels. In the OW group, female students had low scores in eating at night only, while male students had low scores in eating at night, eating speed, and food selection. All subjects wanted more height than measured. Only male students in the UW group wanted weight loss, whereas female students in the OW and NW groups did. Higher BMI in female students resulted in more weight difference between measured and wanted. All subjects responded properly themselves in perception of body shape but the OW groups showed a big difference between their present weight and wanted weights. Higher BMI in all students corresponded to more interest in concern and experience of weight management. In the male students, the reason for weight management showed high tendency in being healthy, whereas the female students had high tendency in having a slender figure. Higher BMI in all students corresponded to bigger difference between wanted and perceived body shape. In contrast, lower BMI in all students meant more stress. Greater difference between wanted and measured weight and greater difference between wanted and perceived body shape corresponded to less satisfaction in body shape. In conclusion, compared to the NW and UW groups, the OW group had overeating habits highly linked to stress. Also the OW group didn't have desirable eating behaviors and attitudes because of their greater interest in concern and experience of weight control and stress accumulation, and finally there was difference in food habits and behaviors according to the BMI level. Therefore these results suggest that effective nutritional programs should be developed including correct body image and good dietary habits.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.939-942
• /
• 2007

Vacuum cleaner is a close life product that can remove various dusts from our surroundings. However well vacuum cleaner clean our environments, many people are looking away from it, due to its loud noise. Its noise causes a big trouble in the usual life, for example, catch calls, TV watching and discussing etc. To reduce these inconveniences, noise reduction methods and systematic design of low noise vacuum cleaner are studied in this paper. At first, sound quality investigation is performed to get the noise level and quality that make people TV watching and catch calls available. Based on the European and domestic customer SQ survey result, sound power, peak noise level and target sound spectrum guideline are studied and introduced. As a second, precise product sound spectrums are designed into each part based on the sound quality result. Fan-motor, brush, mainbody, cyclone spectrums are decided to get the final target sound based on the contribution level. Fan-motor is the major noise source of vacuum cleaner. Specially, its peak sound, RPM peak and BPF Peak, cause the people nervous. To reduce these peak sounds, high rotating impeller and diffuser are focused due to its interaction. A lot of experimental and numerical tests, operation points are investigated and optimization of flow path area between diffusers is performed. As a bagless device, cyclones are one of the major noise sources of vacuum cleaner. To reduce its noise, previous research is used and adopted well. Brush is the most difficult part to reduce noise. Its noise sources are all comes from aero-acoustic phenomena. Numerical analysis helps the understanding of flow structure and pattern, and a lot of experimental test are performed to reduce the noise. Gaps between the carpet and brush are optimized and flow paths are re-designed to lower the noise. Reduction is performed with keeping the cleaning efficiency and handling power together and much reduction of noise is acquired. With all above parts, main-body design is studied. To do a systematic design, configuration design developments technique is introduced from airplane design and evolved with each component design. As a first configuration, fan-motor installation position is investigated and 10 configuration ideas are developed and tested. As a second step, reduced size and compressed configuration candidates are tested and evaluated by a lot of major factor. Noise, power, mass production availability, size, flow path are evaluated together. If noise reduction configuration results in other performance degrade, the noise reduction configuration is ineffective. As a third configuration, cyclones are introduced and the size is reduced one more time and fourth, fifth, sixth, seventh configuration are evolved with size and design image with noise and other performance indexes. Finally we can get a overall much noise level reduction configuration. All above investigations are adopted into vacuum cleaner design and final customer satisfaction tests in Europe are performed. 1st grade sound quality and lowest noise level of bagless vacuum cleaner are achieved.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.57.1-57.8
• /
• 2019

Background: The relationship between the lateral deviation of chin and the upper and middle facial third asymmetry is still controversial. The purpose of this study is to evaluate the correlation of upper and middle facial third asymmetry with lateral deviation of chin using 3-dimensional computed tomography. The study was conducted on patients who underwent orthognathic surgery from January 2016 to August 2017. A total of 40 patients were included in this retrospective study. A spiral scanner was used to obtain the 3-dimensional computed tomography scans. The landmarks were assigned on the reconstructed 3-dimensional images, and their locations were verified on the axial, midsagittal, and coronal slices. The Pearson correlation analysis was performed to evaluate the correlation between chin deviation and difference between the measurements of distances in paired craniofacial structures. Statistical analysis was performed at a significance level of 5%. Results: In mandible, the degree of chin deviation was correlated with the mandibular length and mandibular body length. Mandibular length and mandibular body length are shorter on the deviated-chin side compared to that on the non-deviated side (mandibular length, r = -0.897, p value < 0.001; mandibular body length, r = -0.318, p value = 0.045). In the upper and middle facial thirds, the degree of chin deviation was correlated with the vertical asymmetry of the glenoid fossa and zygonion. Glenoid fossa and zygonion are superior on the deviated-chin side than on the non-deviated side (glenoid fossa, r = 0.317, p value = 0.046; zygonion, r = 0.357, p value = 0.024). Conclusion: Lateral deviation of chin is correlated with upper and middle facial third asymmetry as well as lower facial third asymmetry. As a result, treatment planning in patients with chin deviation should involve a careful evaluation of the asymmetry of the upper and middle facial thirds to ensure complete patient satisfaction.

• Korean journal of food and cookery science
• /
• v.21 no.1 s.85
• /
• pp.64-74
• /
• 2005

To develop the diet for Korean type 2 diabetic patients, a consumer survey was conducted (N=35) and was analyzed statistically. The survey compared the results of a questionnaire, somatometry, and blood parameters before and 8 weeks after the experiment. It was divided into Diabetic diet enforcement group (DDE) vs. Non diabetic diet enforcement group (NDDE). There was no significant difference in body weight, body mass index (BMI), body fat, triglyceride (TG) and low density lipoprotein cholesterol (LDL-C) of the subjects before and 8 weeks after the experiment. DDE's average fasting glucose (FBG) and post prandial 2 hours blood glucose (PP2) were significantly decreased before and after the experiment (p<0.05). NDDE's average FBG and PP2 showed no significant difference. In terms of Hemoglobin $A_lC\;(HbA_1C)$ content, DDE's had significantly decreased level both before and after the experiment (p<0.05), while there was no significant difference in the NDDE group. Cholesterol and High density lipoprotein cholesterol (HDL-C) were significantly different in DDE (p<0.05) both before and after the experiment. Whereas in the case of NDDE, there was no significant difference on the cholesterol and HDL-C, while DDE's showed a significant difference before and after the experiment. In terms of patients distribution depending on their treatment (p<0.05), NDDE had no significant difference before and after the experiment. For an item asking blood glucose control, DDE had significant difference before and after the experiment (p<0.01), while NDDE had no significant difference. For program satisfaction (p<0.05) and health (p<0.001), both the groups changed significantly after the experiment. But there was no significant difference in applying it to their real life after the experiment. Based on these results, DDE had the decreased blood glucose levels, $HbA_1C$, and cholesterol and increased HDL-C, with decreased rate of the patients taking oral hypoglycemic agents. In addition, many of the patients who participated in the experiment were found to be satisfied with the program, in terms of having less trouble in glucose control and exhibited improvement in health. Hence, based on the above results it was concluded that program was a very successful one for the treatment of diabetes.

• Journal of agricultural medicine and community health
• /
• v.33 no.2
• /
• pp.204-220
• /
• 2008

Objectives: This study was performed to determine the levels of depression symptoms among the community elderlies and to reveal its related factors, specifically aimed at revealing psycho-social factors such as social support net-work, sense of self-esteem, state anxiety, interpersonal behavior trait and locus of control. Methods: The interviews were performed during the period from April 1st to June 30th, 2007 to the 790 elderlies in urban and rural areas. Results: The mean scores of depression (CES-D) among all subjects were 16.65±10.97(urban: 18.81±10.31, rural: 14.49±11.20) and they were higher in urban than rural. The level of depression symptoms was influenced by the variables of educational level, with or without spouse, bear for living expenses, sense of satisfaction in daily life. As for health related behaviors, they were influenced by the variables of with or without regular exercise. As for health status, they were influenced by the subjective health status, with or without disability of body, visual acuity, hearing ability, ability of food mastication, urinary incontinence, with or without help in activity of daily living (ADL) and instrumental activity of daily living (IADL). As for social support net-work and social activities, they were influenced by number of offspring, frequency of offspring contents, frequency of going out and activity of hobbies. As for psycho-social factors, they were influenced by sense of self-esteem, state anxiety and social support, especially, the level of depression symptoms was higher influenced by the variables of psycho-social factors than other variables. Conclusions: Lower of the level of depression symptoms among the community elderlies would require development and application of programs to keep under management psycho-social factors as well as looking for ways to promoting the present health status.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.103-114
• /
• 2023

Objectives: This study was conducted to evaluate hand-arm vibration (HAV) exposure levels due to the use of power hand tools and to evaluate the determinants in the automobile assembly process. Methods: The exposure level to HAV was evaluated for 30 work lines in five assembly processes (body, engine, chassis, door, and design) that use air-powered tools and battery-powered tools and operate in circulation for two hours. The 2-hr equivalent energy vibration acceleration, A (2), of the task was measured. The 8-hr equivalent energy vibration acceleration, A (8), was estimated in consideration of the number of tasks that can be performed per day by each process. In addition, a survey on the working environment was conducted with workers exposed to vibration. Results: The geometric mean of the HAV exposure level, A (2), for a total of 30 tasks was 2.51 m/s², and one case was 10.30 m/s², exceeding TLV (2hr). The HAV exposure level of A (8) was evaluated from 1.03 m/s² to 5.36 m/s². A (2) showed a statistically significant difference (P<0.01) for each process, and the chassis process (GM=3.90 m/s²) was the highest. The larger the tool size and the longer the tool length, the higher was the vibration acceleration when using a battery-powered tool than an air-powered tool (P<0.01). Battery-powered tool users showed higher dissatisfaction on all items than did air-powered tool users. Conclusions: As a result of this study, it is necessary to implement a program to reduce the HAV exposure levels.

• Journal of Korean Public Health Nursing
• /
• v.26 no.2
• /
• pp.227-238
• /
• 2012

Purpose: The purpose of this study was to examine physical activities and health belief in order to provide basic data on obesity prevention and management among elementary school students based on the health belief model. Methods: Participants included 194 fifth grade students in an elementary school located in Seoul. Data were collected by questionnaires and physical measurement, including weight and height. The SPSS Win 17.0 program using descriptive statistics, ANOVA with Scheff$\acute{e}$ post hoc tests, and Cronbach's alpha coefficients was used in data analysis. Results: Significant differences were observed in physical activity according to perceived severity (F=3.444, p=.034), perceived benefit (F=7.674, p=.001), perceived barrier (F=21.014, p<.001), and self-efficacy (F=22.098, p<.001). A significant difference in physical activity (t=4.502, p<.001) and perceived severity (t=-2.278, p=.024) was observed according to gender. Significant differences in physical activity (t=7.633, p=.006), perceived barrier (t=10.826, p=.001), and self-efficacy (t=5.928, p=.016) were observed according to obesity status. Significant differences were observed in physical activity (F=7.503, p=.001), perceived susceptibility (F=37.904, p<.001), and perceived barrier (F=3.425, p=.035) depending on level of satisfaction with body image. Conclusions: In order to promote physical activity among children with low physical activity, development of program with an emphasis on the benefits of physical activity and physical activity self-efficacy, and to decrease the barriers to physical activity is needed.

• Fashion & Textile Research Journal
• /
• v.18 no.3
• /
• pp.363-373
• /
• 2016

This study aims to develop an all-fabric integrated smart jacket in order to create a temperature-regulating system based on a user experience design. For this research, previous research technologies of a textile switch interface and a temperature-regulating system were utilized and a unifying technology for the all-fabric integrated smart jacket was developed which can provide the appropriate temperature environments to the human body. A self-heating textile was applied at the areas of the back and hood in the final tested jacket, and an embroidery circuit was developed in the form of a rectangle in the back and in both ears of the hood, taking into account the pattern of the jacket part where it was be applied and the embroidery production method. The textile switch interface was designed in a three-layer structure: an embroidery circuit line in a conductive yarn, an interval material, and a conductive sensing material, and it was made to work with the input and output sensors through the multiple input method. After the all-fabric integrated smart jacket was produced according to the pattern, all of the textile band lines for transmission were gathered and connected with a miniature module for controlling temperature and then integrated into the inside of the left chest pocket of the jacket. After the users put on this jacket, they were asked to assess the wearing satisfaction. Most of them reported a very low level of irritation and discomfort and said that the jacket was as comfortable as everyday clothing.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.11-20
• /
• 2010

User-oriented Design is necessary in planning the interior design of Metropolitan Railroads trains, since this is a typical means of transportation in this modem society and all ages people with different body scale use this facility. However, there are little studies about facility panning and zoning of Metropolitan Railroads train considering users. Therefore, in this study, after completing the checklist based on the current legal standards of facility installation of South Korea and Japan, we examined user's facility and suggest several improvement of the opening 14 metropolitan railroad lines in Seoul. Then, we evaluated this facilities according to 41 standards; general facility(24 standards), safety facility(4 standards), guide facility(11 standards), other facility(4 standards). The result of this study may be summarized as follows. 1) General facility has to be designed to obtain lots of room for storage and this facility should be fixed up tightly with secure system. 2) Safety facility should be designed to minimize a difference of floor-level between threshold of train and ground. Also, using various color and material could help passengers to distinguish different space and facility. 3) Guide facility should be designed to guide passengers to the accurate direction with proper sign design in the pathway of Metropolitan railroad train. Also, more various color, which based on the research about physiological and psychological effect, should be used to guide people. 4) Other facility should equip more visual system using common good and informative contents. Through this study, we try to understand the current interior physical condition of Metropolitan Railroads trains. However, for future studies, it is expected to supplement evaluation standards considering aesthetic design, environmental improvement of indoor air quality and the satisfaction and demand of Metropolitan Railroads trains.