• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.4
• /
• pp.546-550
• /
• 2014

In this research, we report all the elements are placed in the space above the patient table as a transmit coil to give optimized B1+ field for the body object. Through the simulations, we compared upper-and-lower parts combined 8 channel Tx array to upper only 8 channel Tx array and showed the utilities of B1+ shimming in multi-channel Tx body imaging at 3T. Half-cylinder shaped upper array shows weak B1+ field area around back of patient without B1+ shimming. After B1+ shimming, highly induced SAR places occurred in the arm region due to the close distance to the both end elements which were driven by very high RF current to enhance B1+ in back area. The proposed upper and lower combined array provides an enhanced homogeneous B1+ field in large ROI imaging as a result of shimming over the body size phantom. Through this research we proved the usefulness of the proposed insertional upper and lower parts combined transmit array for 3T body imaging.

• The Korean Journal of Community Living Science
• /
• v.23 no.3
• /
• pp.221-231
• /
• 2012

To find the differences between the real somatotype and the ideal somatotype, WHR(Waist to Hip Ratio), WCR(Waist to Chest Ratio), and body cathexis were analysed by using ANOVA test, Duncan's multiple range test, and $x^2$ test. Fashion image sought by female collegians was surveyed, too. The results were as follows. WHRs in slim, usual, fat body type were 0.75, 0.76, and 0.83 and WCRs were 0.77, 0.81, 0.80. The respondents who considered themselves to be overweight recognized themselves to be fatter than their real weight. They were not satisfied with their bust girth in slim body type, thighs and calves in usual body type, and all parts except for foot length, hand length and arm length in fat body type. 60% of the thin people considered their body hourglass shape, 30.4% of regular people recognized their body triangle type, 43.8% of fat people thought their body was round form. They thought current ideal body size was bigger in height and bust girth and smaller in waist girth and hip girth, and weight than real body size. Also they responded ideal body shape was an hourglass type independent of somatotype. The pursuit of clothing image was that 45.5% of female collegians were fashionable and raffine and 10.4% of female collegians was elegant and graceful. Among the body area, body parts that may have an effect on body image were body length in 13.1% of the respondents, waist girth in 10.7% of the respondents, and hip girth in 10.0% of the respondents.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.4 s.44
• /
• pp.405-416
• /
• 1992

This study was performed to investigate correlation between total body weight loss and local sweat rate and to find out any possible method that can estimate total body weight loss judging from local sweat rate. Twelve adult females were kept at 44 $\pm1^{\circ}C$, 50 ${\pm}5\%$ R.H. (1) Physiological responses such as total body weight loss, local sweat rate, rectal temperature, skin temperature, blood pressure and pulse, (2) micro climate inside garment and (3) subjective sensation were examined. Two types of garment such as long-sleeves with long pants (Type I) and half·sleeves with short pants (Type II) were used to observe the effect of garment types on sweating response. Both clothing weight was equal (132$\pm$3 g/$m^{2}$). The results were as follows: 1. Regardless of the different types, total body weight loss was more interrelated with the sweat rate on forehead than any other parts of the body. Except the forehead, different parts of body with different types of garment influenced on body weight loss quite differently. 2. Total body weight loss was more interrelated with the weight gain of garment than the local sweat rate. 3. Under the environment of 44$\pm1^{\circ}C,\;50{\pm}5\%$R.H., body weight loss during 1 hour of subject clothed and silted was 275.2 g/hr and weight loss per body surface area was 178.9 g/$m^{2}/hr$ Garment types have no influences on total body weight loss. 4. Local sweat rate (mg/7.07 $cm^{2}/hr$) was 208.0,191.0, 133.0, 115.0,81 0, 75.1 and 66.3 on scruff, breast, forehead, forearm, thigh, upper arm, leg respectively No evidence has been found that garment types influenced on local sweat rate (p<0.1). 5. No interrelationships between rectal temperature and total body weight loss, local skin temperature and total body weight loss, and local skin temperature and local sweat rate were found. From this study, some possible method that we can estimate total body' weight loss judging from weight loss of garment. But considering the fact that clothing design factor, the physical characteristics of fabric and environmental factor such as humidity and wind velocity should be concerned in weight loss of garment, it should be studied further whether the total body weight loss can be estimated properly from the weight loss of garment. This experiment suggest that different parts of body with different types of garment can influence on body weight loss quite differently. Therefore, in order to get more precise results, more studies under the diversity of garment types should be done in the near future.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.10a
• /
• pp.132-132
• /
• 2003

• The Research Journal of the Costume Culture
• /
• v.12 no.1
• /
• pp.121-135
• /
• 2004

The purpose of this study is to analyze the image evaluation and the preference of tailored jacket according to the body type and the degree of satisfaction with their body of middle-aged women. The subjects used for this study were three hundred and twenty three middle-aged women ranging from 35 to 50 years old. We measured their bodies and asked them report to the questionnaire. The results are as follows. 1) Middle-aged women were classified into four typical types of body. The type 1 was tall and thin and had a front view silhouette with the form of a letter X. The type 2 was the tallest and the medium of fatness and had a front view silhouette with the form of a letter H that the lower part of the body is short. The type 3 was the medium of height and width and had a front view silhouette with the form of a letter A that the upper part of the body is short compared with their height. The type 4 were the shortest and the fattest and had a front view silhouette with the form of a letter Y that the lower and upper parts of the body is the longest. 2) Middle-aged women roughly tended not to be satisfied with part of their body. The results showed that a neck was the most satisfied body part and the weight was the least satisfied as well as overall leg shape among all 13 body parts. 3) The type 1 had the highest the degree of satisfaction on their face size, upper arm girth, waist, hip girth, weight and body shape, etc., excepting hip shape among 4 body types.

• Herbal Formula Science
• /
• v.16 no.1
• /
• pp.169-183
• /
• 2008

In this study, we measured body mass index, visceral fat ratio and 6 parts of body, neck circumference, circumference of upper arm, chest circumference, abdomen circumference, hip circumference, and thigh circumference by bioimpedence analysis system, after taking Gyeongshingangjeehwan16 (GGEx16) in five months except the first period before taking GGEx16 on 49 women who are obesity or high-level obesity. In order to examine the significance test for the effect of obesity improvement of GGEx16, we practices repeated measure ANOVA with values of measurement variables in 6 monthly times. As a result of all measurement variables, there were significant difference (P-value=0.001). Therefore, we can say that GGEx16 is effective about obesity improvement. As it dramatically decreased between second measure period and first measure period for all measure variables, we can see that there were the most effect of GGEx16 in the first time after taking GGEx16. It is known that a important measurement variable to have a effect for obesity improvement about two variable which are body mass index and visceral fat ratio is waist circumference through correlation analysis. The result of whether there are differences to effect of obesity improvement for GGEx16 around the climacteric, there were significant difference for the effect of obesity improvement for GGEx16 around the climacteric about all parts of body (P-value=0.001). There were also powerfully difference in effect of obesity improvement for GGEx16 around the climacteric about all parts of body (P-value=0.001). Especially, the climacteric before is more effective than the climacteric after in the aspect of the effect of GGEx16.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.3
• /
• pp.81-92
• /
• 2008

Musculoskeletal disorder (MSD) problems have been increasingly reported in hospital sector but the problems were not addressed with respect to holistic aspects of the target population in Korea. Often, it is required to understand how MSD symptoms are associated with factors such as personal, work environmental and psychosocial stressors. To examine features of association between sets of MSD symptoms and the factors, a questionnaire survey was conducted in a university hospital. A 140-item questionnaire was developed and used for collecting information including factors (e.g., job/occupation, task/activity, job stress) and MSD symptoms. A total of 1,091 workers (male 23.7% and female 76.3%) were finally determined for data analyses. Prevalence rate for the whole body was 72% and, among body parts, the highest was 48.7% for the shoulder, followed by 34.6%(the low back), 32.7%(the leg/foot), 27.9%(the neck), 26.7%(the wrist) and 12%(the elbow). The symptoms were significantly different by job/occupational variable in each of all body parts except the neck. The symptoms were very significantly different by task/activity variables in each of all body parts while those symptoms were significantly different by psychosocial variables, depending on body part and gender. In the logistic regression analyses performed for MSD symptoms by body part and each of 3 factors, odds ratio values varied, ranging from 0.7 to 3.3. The controls for reducing the symptoms were discussed on the basis of the findings. The results show that the MSD symptoms can remarkably vary by the factors and, in particular, can be highly differential for the task/activity factor. This study suggests that MSD symptom features be examined by using various factors and then a higher differential factor be primarily utilized for controling MSD symptoms in general industry including hospital settings.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.119-128
• /
• 2017

G-induced Loss of Consciousness(G-LOC) can be predicted by measuring Electromyogram(EMG) signals. Existing studies have mainly focused on specific body parts and lacked of consideration with quantitative EMG indices. The purpose of this study is to analyze the indices of EMG signals by human body parts for monitoring G-LOC condition. The data of seven EMG features such as Root Mean Square(RMS), Integrated Absolute Value(IAV), and Mean Absolute Value(MAV) for reflecting muscle contraction and Slope Sign Changes(SSC), Waveform Length (WL), Zero Crossing(ZC), and Median Frequency(MF) for representing muscle contraction and fatigue was retrieved from high G-training on a human centrifuge simulator. A total of 19 trainees out of 47 trainees of the Korean Air Force fell into G-LOC condition during the training in attaching EMG sensor to three body parts(neck, abdomen, calf). IAV, MAV, WL, and ZC under condition after G-LOC were decreased by 17 %, 17 %, 18 %, and 4 % comparing to those under condition before G-LOC respectively. Also, RMS, IAV, MAV, and WL in neck part under condition after G-LOC were higher than those under condition before G-LOC; while, those in abdomen and calf part lower. This study suggest that measurement of IAV and WL by attaching EMG sensor to calf part may be optimal for predicting G-LOC.

• Journal of Acupuncture Research
• /
• v.30 no.5
• /
• pp.65-76
• /
• 2013

Objectives : This study was designed to find out the differences of the acupuncture sensation by body parts. Methods : Sixty-three subjects got acupuncture at five acupoints which represent five different body parts ; head($GV_{20}$), abdomen($ST_{25}$), back($BL_{24}$), upper extremity($LU_9$), lower extremity($GB_{40}$). All subjests were asked to complete questionnaire rating the intensity of 13 kinds of acupuncture sensation(acupuncture sensation scale, ASS). We compared the subjective acupuncture sensation between the body parts. Results : Intensity of acupuncture sensation of $GV_{20}$ was significantly lower than $LU_9$(p=0.001) and $GB_{40}$(p=0.000). Sum of acupuncture sensation of $GV_{20}$ was also significantly lower than $BL_{24}$(p=0.011), $LU_9$(p=0.004) and $GB_{40}$(p=0.033). Among the 13 types of acupuncture sensation scale, tingling and aching were well sensed at $GV_{20}$ and $ST_{25}$, aching, tingling and sharp pain were well sensed at $LU_9$, $GB_{40}$, dull pain, deep pressure and heaviness were well sensed at $BL_{24}$. Conclusions : Head showed significantly lower intensity of acupuncture sensation than upper extremity and lower extremity. Among the acupuncture sensation scales, tingling and aching were well sensed at head and abdomen, aching, tingling and sharp pain were well sensed at upper extremity and lower extremity, dull pain, deep pressure and heaviness were well sensed at back.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.4
• /
• pp.109-118
• /
• 2012

Large number of part design for aircraft and automobile is preceded by functional or sectional design groups for efficiency. However, interferences and gaps can be found when the parts and sub-assemblies by those design groups are to be assembled. These interferences and gaps cause design changes and additional repair processes. While interference problem has been resolved by digital mockup and concurrent engineering methodology, gap problem has been covered by temporary treatment of filling gap with sealant. This kind of fast fix causes fatal problem of leakage when the gap is too big for filling or the treatment gets old. With this research, we have developed a program to find the gap automatically among parts of assembly so that users can find them to correct their design before manufacturing stage. By using decomposition model representation method, the developed program can search the gap among complex car body parts to be visualized with volumetric information. It can also define the boundary between the gap and exterior empty space automatically. Though we have proved the efficiency of the developed program by applying to automobile assembly, application of the program is not limited to car body only, but also can be extended to aircraft and ship design of large number of parts.