• Korean Journal of Materials Research
• /
• v.20 no.11
• /
• pp.559-569
• /
• 2010

The liquid-phase sintering method was used to prepare a glass lens forming core composed of SiC-$Al_2O_3-Y_2O_3$. Spark plasma sintering was used to obtain dense sintered bodies. The sintering characteristics of different SiC sources and compositions of additives were studied. Results revealed that, owing to its initial larger surface area, $\alpha$-SiC offers sinterability that is superior to that of $\beta$-SiC. A maximum density of $3.32\;g/cm^3$ (theoretical density [TD] of 99.7%) was obtained in $\alpha$-SiC-10 wt% ($6Al_2O_3-4Y_2O_3$) sintered at $1850^{\circ}C$ without high-energy ball milling. The maximum hardness and compression stress of the sintered body reached 2870 Hv and 1110 MPa, respectively. The optimum ultra-precision machining parameters were a grinding speed of 1243 m/min, work spindle rotation rate of 100 rpm, feed rate of 0.5 mm/min, and depth of cut of $0.2\;{\mu}m$. The surface roughnesses of the thus prepared final products were Ra = 4.3 nm and Rt = 55.3 nm for the aspheric lens forming core and Ra = 4.4 nm and Rt = 41.9 for the spherical lens forming core. These values were found to be sufficiently low, and the cores showed good compatibility between SiC and the diamond-like carbon (DLC) coating material. Thus, these glass lens forming cores have great potential for application in the lens industry.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.859-865
• /
• 2007

This paper presents a method to analyze the unbalance response of a high speed polygon mirror scanner motor supported by sintered bearing and flexible supporting structures by using the finite element method and the mode superposition method. The appropriate finite element equations for polygon mirror are described by rotating annular sector element using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. The rotating components except for the polygon mirror are modeled by Timoshenko beam element including the gyroscopic effect. The flexible supporting structures are modeled by using a 4-node tetrahedron element and 4-node shell element with rotational degrees of freedom. Finite element equations of each component of the polygon mirror scanner motor and the flexible supporting structures are consistently derived by satisfying the geometric compatibility in the internal boundary between each component. The rigid link constraints are also imposed at the interface area between sleeve and sintered bearing to describe the physical motion at this interface. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by solving the associated eigenvalue problem by using the restarted Arnoldi iteration method. Unbalance responses in time and frequency domain are performed by superposing the eigenvalues and eigenvectors from the free vibration analysis. The validity of the proposed method is verified by comparing the simulated unbalance response with the experimental results. This research also shows that the flexibility of supporting structures plays an important role in determining the unbalance response of the polygon mirror scanner motor.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.5
• /
• pp.910-920
• /
• 2016

This study is to understand the problems of current police raincoats for professional policemen and conscripted policemen. Interviews and a survey were completed to investigate the wearing conditions of current police raincoats. The questionnaire was composed of questions on current wearing conditions of raincoat, motional adaptability, dimensional compatibility, design suitability and demographic information on the research target. The results indicated that the wearing frequency of raincoats had significant difference according to duty and age range. The main reason for the low wearing frequency was the uncomfortableness of working while wearing the raincoat, followed by the inconvenience of managing the raincoat after use and feeling hot while wearing the raincoat. The three most important factors when wearing a raincoat was pleasantness, activity capability and the functionality of the fabric. The satisfaction on body parts during motions tended to be evaluated lower as the raincoat size increased. The results of the dissatisfaction factors indicated that the raincoat hood had the most problems. There was inconvenience when using the equipment belt because officers have to wear their belts inside the raincoat. In regards to the fabric satisfaction level, respondents were less satisfied with ventilation, hygroscopicity, and drying time. Therefor it appeared that the current raincoat had problems due a lack of functionality in regards to ventilation, hygroscopicity, and quick drying; in addition, the satisfaction on motional adaptability had a significant difference according to raincoat size.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.393-401
• /
• 2012

Inorganic pigment is excellent at stability to human body and compatibility with different materials and has been used in a variety of field such as cosmetics, printing inks, paints, and construction materials for improving the aesthetic features. In this paper, hydrothermal synthesis method was used to prepare the manganese and iron dopped with titania pigment. As process parameters, the amount of manganese precursor and iron precursor, and calcined temperature was changed. Optimum amounts of manganese and iron dopped with titania precursor to give excellent color index was manganese 1.0wt% and iron 1.5wt% for dopped titania, and Optimum calcination temperature was $550^{\circ}C$. The synthesized pigments were analyzed by XRD, SEM, EDS, Spectrophotometer and UV-Vis Spectrometer.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.11-15
• /
• 2004

This paper deals with EMC filter for a personal computer( PC). A PC contains many sources of noise inside and out, with many connected cables. High noise levels are also emitted from the PC became of high-speed signals. So radiated noise from the computer body may sometimes cause problems. Therefore, we design and fabricate an electromagnetic compatibility (EMC) filter for PC, which is composed of feed-through capacitors and ferrite beads with high permeability. Through extensive test, the proposed EMC filter is shown to have excellent differential-mode and common-mode noises filtering characteristics above 30 dB in the frequency band from 10 MHz to 1.5 GHz. The immunity characteristics are improved more than 10 to 30 dB over the frequency band from DC to 1.8 GHz

• Informatization Policy
• /
• v.19 no.3
• /
• pp.36-49
• /
• 2012

Internet Corporation for Assigned Names and Numbers (ICANN) is the body which manages the allocation and registration of global Internet IP addresses and domain names. As a gesture to overcome the dependency on the U.S. government, ICANN and the U.S. Department of Commerce jointly made the Affirmation of Commitment in which they submitted the workings of ICANN to the supervision of a council of Internet experts. Accountability and Transparency Review Team (ATRT) is one of four teams created for this purpose. In December 2010, ATRT made 27 recommendations, which were subsequently approved by the ICANN Board. These reform efforts of ICANN provide significant implications for the future of Korean Internet governance. Korea should enhance the compatibility of its domestic decision making process related to Internet addresses with the private sector driven, bottom-up process of global Internet governance. In order to increase the involvement of private sector and civil society, it is recommended for Korea to formalize the mechanism for bottom-up process. Insertion of a new provision concerning a bottom-up process into the Internet Addresses Act should be considered.

• Journal of Periodontal and Implant Science
• /
• v.31 no.1
• /
• pp.91-109
• /
• 2001

The purpose of this study is to evaluate histologically the resorption and tissue response of various resorbale membranes used for guided tissue regneration procedures, using a subcutaneous model on the dorsal surface of the rat. In this study, 12 Sprague-Dawley male rats(mean BW 150gm) were used and the commercially available materials included dense collagen membrane, freeze-dried bovine dura mater loos collagen membrane, PLA/PLGA membrane. Animals were sacrificed at 3, 6 and 8 weeks after implantation of various resorbable membranes. Specimens were prepared with Hematoxylin-Eosin stain for light microscopic evaluation. The results of this study were as follows: 1. Resorption : Loose collagen membrane group was resorbed most rapidly. Dense collagen membrane group and freeze-dried bovine dura mater group were rarely resorbed. 2. Inflammatory reactions : PLA/PLGA membrane group showed persistent and severe inflammatory reactions for 3 to 8 weeks. Moderate inflammatory reactions and the ectopic formation of calcified material were observed in dense collagen membrane group. Freeze-dried bovine dura mater group and loose collagen membrane group showed mild inflammatory reactions 3. In PLA/PLGA membrane group, multinucleated giant cells by foreign body reactions were observed. In conclusion, the resorption of freeze-dried bovine dura mater didn't happen for 3-6weeks, which showed the best bio-compatibility. Therefore, freeze-dried bovine dura mater was considered proper resorbable membrane for guided tissue regeneration.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.2079-2084
• /
• 2013

Background: Breast cancer is the most prevalent cancer among Iranian women and mastectomy comprises 81% of surgeries for treatment of breast cancer. Mastectomy may create feelings such as deformation or impairment in patients, cause body-image disorder, and reduce sexuality and sexual activity which in turn may entail mental disorders. The study aimed to elaborate coping processes. Materials and Methods: A grounded theory method was used in conducting this study. Twenty Iranian participants undergoing mastectomy were recruited with purposive sampling. An open, semi-structured questionnaire were developed. Obtaining consent, conversations were recorded and immediately transcribed after each session. Data analysis was carried out with the constant comparative method using the Strauss Corbin approach. Results: Analyzing the collected data, the study came up with seven main categories which affected the coping process in patients with breast cancer, namely: reactions to mastectomy; loss and death contest; reconstruction of evaluation system; consent for undergoing mastectomy; reactions and troubles after loss; confrontation of loss and health; and reorganization and compatibility with changes. Conclusions: The results of the study indicated: when patients become informed of their breast cancer and the necessity of undergoing mastectomy as the treatment, they probably pass through seven categories to adapt after mastectomy. Having insight about them is likely to contribute medical personnel in leading patients to the highest degree of feeling healthy.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.251-258
• /
• 2005

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings (HDB) in an HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Reynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigen value problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.2
• /
• pp.67-84
• /
• 1991

This study was carried out to investiagate the residual stress caused by the mismatch of thermal expansion and the bond failure resistance of alloy-porcelain specimens. The thermal expansions of alloys and porcelains were measured by using a straight push-rod dilatometer. Porcelain glass transition temperatures, thermal expansion coefficients, and thermal compatibility indices were derived from length-versus-temperature curves. Strain gauges were used to experimentally determine the Young's moduli of porcelains, the residual stresses of porcelain surface, and tensile bond strengths of the specimens of simulated porcelain metal crown. The obtained results were as follows: 1. The coefficients of thermal expansion for alloys were the minimum of $13.53\mu/^{\circ}C$ and the maximum of $20.11\mu/^{\circ}C$ in the range of $100\sim600^{\circ}C$ and those for porcelains were the minimum of $7.72\mu/^{\circ}C$ and the maximum of $31.24\mu/^{\circ}C$ in the range of $100\sim500^{\circ}C$. 2. The glass transition temperature of porcelains exhibited the same value without my relation to the healing rate, and the thermal disharmony of porcelain and alloy was more affected by porcelains than by the alloys. 3. The Young's moduli of body porcelains were larger than those of opaque porcelains(P<0.01) 4. It seemed that the residual stresses of porcelain surfaces in the porcelainalloy systems were more affected by porcelains than by alleys. 5. The bond strengths of the procelain-base metal alloy systems were larger than those of the porcelain-precious metal alloy systems. The fracture strengths of porcelain surfaces showed significant difference between porcelains (P<0.05).