• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.21-24
• /
• 2001

Bluetooth wireless technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range and point-to-multipoint voice and data transfer. It operates in the 2.4GHz ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module we have developed. This module has a UART interface for HCI and a audio codec for voice. The interface between controller and this module supports common control interface. An FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.337-339
• /
• 2005

The demand for a real-time image surveillance system using network camera server is increasing as the network infra has been grown and digital video compression techniques have been developed. The image surveillance system using network camera server has several merits compared to existing real-time image surveillance system using CCTV. It would be more convenient if wireless realtime image transmission were possible. In this paper, a bluetooth module is designed and implemented for a real-time image surveillance system to send and receive informations wirelessly. It may simplify the system development procedures and increase the productivity by low power consumption, low cost, and simple wireless installation. A scatter-net formation is proposed using dynamic and distributed algorithm so that the network connection is reliable.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.547-552
• /
• 2003

In this thesis, interference phenomena of bluetooth networks requiring Security were minimized; strengthened security of piconet by assigning an identical PIN code to bluetooth devices, which was establishing a specific piconet during authentication stage. To establish a bluetooth piconet system. an unique ID was assigned to each bluetooth device, communication algorithms having different data formats between devices was designed, and an embedded hardware module using ARM processor and uCOS-II RTOS was implemented. About 30% of CPU efficiency in the module was increased by modifying functions including block parameters to work as nonblocking; by the increased efficiency of total piconet, the module could be used as an access point. The module could transmit maximum 10 frames of image and also audio signal by switching the packet effectively according to channel condition. By above-mentioned process, video, audio, and data could be well transmitted by the bluetooth managing program and the possibility of a commercial remote control system using bluetooth technology was suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2801-2806
• /
• 2011

During data transmissions via Bluetooth networks, data to be encrypted, or plain text between the application layer and the device layer, can be hacked similar to a key-logger by the major function hooking technique of Windows Kernel Driver. In this paper, we introduce an improved protection module which provides data encryption transmission by modifying the data transmission driver of the Bluetooth device layer, and also suggest a self-protecting scheme which prevents data exposure by various hacking tools. We implement the protection module to verify the confidentiality guarantee. Our protection module which provides data encryption with minimal latency can be expected the widespread utilization in Bluetooth data transmission.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1285-1288
• /
• 2002

Bluetooth wireless technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range and point-to- multipoint voice and data transfer. It operates in the 2.4GHz ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module we have developed. This module was developed based on IP reuse. So Interface of each module such as link controller UART, and audio CODEC is designed based on ARM7 comfortable processor. We also considered various interfaces of related external chips. The fully synthesizable baseband module was fabricated in a $0.25{\mu}m$ CMOS technology occupying $2.79{\times}2.8mm^2$ area including the ARM TDMI processor. And a FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1304-1307
• /
• 2002

In this paper, we describe the structure and the test results of a Bluetooth baseband module we have developed. The module has a distributed buffer, i.e. FIFO, for data stream. Bus interface of the module is designed on the basis of interface of microprocessor widely used and the external interface is designed to consider chips connected directly. Since the module performs as many hardware efficient tasks as possible, processing load of microprocessor is very small. It can also be controlled either by software or by hardware for flexibility. The fully synthesizable baseband module was fabricated in a $0.25\mu\textrm{m}$ CMOS technology occupying $2.79\times2.8{\textrm{mm}^2}$ area. And an FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

• The KIPS Transactions:PartC
• /
• v.11C no.4
• /
• pp.539-544
• /
• 2004

This paper presents the implementation of the bluetooth headset and the audio gateway connected to the mobile Phone in the embedded environment. The bluetooth module includes the BC02 processor chip, the BCSP02 firmware and the bluelab software Including bluetooth protocol stack. The above components in the bluetooth module developed at CSR company are used as the development environment. The application program using API functions supported by bluelab is coded by C language and loaded on the flash ROM of the bluetooth module. The cail processing capacity measuring the call setup time and the clearing time between the audio gateway and the headset is considered as the performance parameter of the developed systems. As a call setup and clearing time between the audio gateway and the headset is about 88.8ms, the call processing capacity is about 11 calls per second. Therefore the performance result is satisfied in the aspect of the call processing time.

• Journal of Korea Multimedia Society
• /
• v.18 no.5
• /
• pp.652-662
• /
• 2015

It is necessary to develop small, implantable bio-telemetry systems which can measure and transmit patients' bio-signals from internal body to external receiver. When measuring bio-signals, like electrical bio-signals, acoustic bio-signal measurement has also a big clinical usefulness. But, sound signal has larger frequency bandwidth than any other bio-signals. When considering these issues, a wireless telemetry system which has rapid data transmission rate proportional to wide frequency bandwidth is necessary to be developed. The bluetooth module is used to overcome the data rate limitation caused by the large frequency bandwidth. In this paper, a novel multimedia bluetooth biotelemetry system was developed which consists of transmitter module located in the body and receiver device located outside of the body. The transmitter consists of microphone, bluetooth, and wireless charging device. And the receiver consists of bluetooth and codec system. The sound inside the skin is captured by microphone and sent to receiver by bluetooth while charging. The wireless charging system constantly supplies the electric power to the system. To verify the performance of the developed system, an in vitro experiment has been performed. The results show that the proposed biotelemetry system has ability to acquire the sound signals under the skin.

• Journal of the Korean Dietetic Association
• /
• v.22 no.3
• /
• pp.225-231
• /
• 2016

The study suggests the possibility of using internet of things for a dietary intake survey. The development scenario of the dietary intake survey was composed of a weighing sensor for measuring food weight, bluetooth module for communicating through smart-phones, and smart-phone application. The weighing sensor attached to the bottom of utensils was designed to measure the weight of initial food & food eaten, and the results were transmitted to the smart-phone through the bluetooth module. The exclusive application in the smart-phone displayed the results of the amount of food intake, calorie intake, and eating rate. Through this system, subjects could continuously monitor their dietary intake & eating rate and recognize their actual eating environment, which leads to prevent overconsumption of food intake & form balanced eating habits. Based on this system, we need to consolidate and develop a weight control program.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.73-75
• /
• 2010

In this paper, using Android's Bluetooth module in order to develop a kiosk PC for Bluetooth communication between the Android framework is developed. Existing kiosk using a touch-screen kiosks for single occupancy were used by single users. However, the kiosks offer a single kiosk for multiple users to access and has the advantage that you can use.