• 에너지공학
• /
• 제5권1호
• /
• pp.8-18
• /
• 1996

석탄가스화 복합발전(IGCC) 시스템의 공정 시뮬레이션의 일환으로서 석탄가스용 복합발전 플랜트의 성능해석을 하였다. Texaco 가스화기와 저온가스 정제공정에서 생성된 가스를 연료로 하는 가스터빈/증기터빈/폐열회수보일러로 구성된 복합사이클발전시스템을 구성한 후, ASPEN(Advanced System for Process Engineering) Code를 이용하여 정상상태 성능해석을 수행하였다. 가스터빈 사이클(GE MS 7001FA)은 공기분리 공정과의 연계성(Integration)이 고려되었고, 증기사이클은 가스화공정과 가스정제 공정과의 연계성(Integration)을 고려하여 구성하였다. 공정해석결과 가스터빈출력(MWe)은 천연가스를 사용하는 경우에 비하여 동일 입열량(연소기 입구기준)기준으로 약 20%의 증가를 가져왔다. 본 연구의 결과를 Bechtel Canada Inc.에서 Nova Scotia 발전소를 대상으로 1991년에 수행한 연구결과와 비교하였을때 잘 일치하였으며, 이를 통하여 본 연구에서 사용된 해석방법이 상용화 공정의 시뮬레이션에 적정하게 이용될 수 있음을 확인하였다.

• ETRI Journal
• /
• 제28권3호
• /
• pp.401-404
• /
• 2006

A new log-domain first-order multifunction filter is proposed in this letter. The proposed filter is systematically derived using the state-space synthesis procedure from a corresponding block diagram. It provides low-pass (LP), high-pass (HP), and all-pass (AP) responses simultaneously for a single input signal. The filter circuit has a very simple structure since it uses only bipolar junction transistors (BJTs) and a grounded capacitor. It can be electronically tuned by changing an external current. The filter has a greater bandwidth due to its inherent current-mode and log-domain operations. PSPICE simulations are given to confirm the theoretical analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.490-495
• /
• 1998

In this paper an asymmetric hydraulic actuator which consists of single acting cylinder and servo valve is modeled for a quarter car active suspension system. This model regards the force as an internal state rather than a control input. The control input of the model is the sum of oil flows that pass through the valve's orifices. The resulting dynamic equation in the state space ap-pears a feedback connection of a nominal linear time in-variant term with a nonlinear bounded uncertain block. Since this model makes it possible to eliminate the force control phase, analysis and controller design are made straightforward and simple. Well known LQR method is then applied. Simulation and test rig experiment show the effectiveness of this approach in modeling and control.

• Journal of Communications and Networks
• /
• 제9권4호
• /
• pp.473-481
• /
• 2007

Energy efficiency is one of the most critical concerns for wireless sensor networks. By allowing sensor nodes in close proximity to cooperate in transmission to form a virtual multiple-input multiple-output(MIMO) system, recent progress in wireless MIMO communications can be exploited to boost the system throughput, or equivalently reduce the energy consumption for the same throughput and BER target. However, these cooperative transmission strategies may incur additional energy cost and system overhead. In this paper, assuming that data collectors are equipped with antenna arrays and superior processing capability, energy efficiency of relevant traditional and cooperative transmission strategies: Single-input-multiple-output(SIMO), space-time block coding(STBC), and spatial multiplexing(SM) are studied. Analysis in the wideband regime reveals that, while receive diversity introduces significant improvement in both energy efficiency and spectral efficiency, further improvement due to the transmit diversity of STBC is limited, as opposed to the superiority of the SM scheme especially for non-trivial spectral efficiency. These observations are further confirmed in our analysis of more realistic systems with limited bandwidth, finite constellation sizes, and a target error rate. Based on this analysis, general guidelines are presented for optimal transmission strategy selection in system level and link level, aiming at minimum energy consumption while meeting different requirements. The proposed selection rules, especially those based on system-level metrics, are easy to implement for sensor applications. The framework provided here may also be readily extended to other scenarios or applications.

• 한국정밀공학회지
• /
• 제25권8호
• /
• pp.96-103
• /
• 2008

In this study, we performed the biomechanical analysis of cervical plate systems by using a computer simulation based on finite element method to derive reliable model by analysis of design variables and fatigue behavior. To simulate the cervical spine movement in-vivo state by surgery, we modeled the cervical plate system which consisted of screws, rings, rivets, and plate and Ultra High Molecular Weight Polyethylene (UHMWPE) Block. The experiment of cervical plate system followed the ASTM F1717 standards that covered the materials and methods for the static and fatigue testing. The result of computer simulation is compared with experimented test. We expected this study is to derive reliable results by analysis of design variables and fatigue behavior for developing a new model.

• 폴리머
• /
• 제32권3호
• /
• pp.239-245
• /
• 2008

Block copolymers of the general formula $[(-CO-R'-CO-HN-Ar-NH-CO-R'-CO)_xNH(CH_2)_3-(Me_2SiO)_y(CH_2)_3NH_2]_n$, [n=18.00 to 1175.0] where $R'=CH_2CH(CH_2GeCl_3)$;$CH_2CHGeCl_3CH_2$; and $Ar=-C_6H_4$;$-(o.CH_3C_6H_4)_2$;$-o.CH_3OC_6H_4)_2$;$-(o.CH_3C_6H_4)$ were prepared by a polycondensation reaction of polyamide containing a pendant trichlorogermyl group and terminal acid chloride $Cl(-CO-R'-CO-NH-Ar-NH-CO-R'-CO-)_xCl$ with aminopropyl-terminated polydimethylsiloxane $H_2N(CH_2)_3(Me_2SiO)_y-(CH_2)_3NH_2]$, (PDMS). These polymers were characterized by elemental analysis, $T_g$, FT-IR, $^1H$-NMR, solid state $^{13}C$-NMR, and molecular weight determination. The thermal stability of these copolymers was examined using thermal analysis techniques, such as TGA and DSC. Their molecular weights as determined by laser light scattering technique ranged $5.13{\times}10^5$ to $331{\times}10^5\;g/mol$. These polymers display their $T_g$ in the range of 337 to $393^{\circ}C$ with an average decomposition temperature at $582^{\circ}C$.

• 한국지반공학회논문집
• /
• 제34권3호
• /
• pp.13-27
• /
• 2018

사석경사식 방파제의 안정성에 있어 파랑에 의한 사석마운드내의 침투흐름의 영향이 연구되었다. 침투흐름은 일반적으로 태풍시 방파제 주변 수위차에 의해 발생된다. 기존 사석마운드의 안정해석법은 정적해석으로 활동면 상의자중(콘크리트블록, 사석, 필터, 보호층)에 의한 수직력과 콘크리트 블록에 작용하는 파압에 의한 수평력(Goda 식으로 산정)의 힘의 평형조건으로 결정된다. 그러나 이 정적방법은 사석마운드 내의 파랑에 의한 침투흐름을 고려할 수 없다. 이런 침투흐름은 사석마운드의 안정성을 감소시킬 수 있다. 본 연구에서는 침투 작용시 사석경사식 방파제의 안정성에 대해 CFD 프로그램(OpenFOAM)과 한계평형해석법(GeoStudio)을 이용하여 검토하였다. 수치해석결과 침투로 인해 사석경사식 방파제의 안정성이 감소하는 것으로 나타났다. 또한 수치해석 결과는 사석마운드의 안정성이 시간에 따라 변하는 것을 보여주었다. 특히 파가 방파제를 월류하고 침투류에 의해 상치콘크리트 측면과 하부에 강한 양압력과 사석마운드 내부에 간극수압이 크게 발생하는 시점에 가장 불안정 상태를 보이는 것으로 나타났다. 따라서 동적 파랑에 의한 침투류의 영향을 고려한 동적해석도 정적해석과 함께 검토할 필요가 있다.

• 한국분무공학회지
• /
• 제8권1호
• /
• pp.1-8
• /
• 2003

The flow analysis of the axial fan of rotary burner was performed by SIMPLE(Semi Implicit Method for Pressure Linked Equations) algorithm and finite volume mothod performed in the case of 3-D, incompressible, turbulent flow. In this study, the coordinate transformation was adapted for the complex geometry of axial fan, and the standard $k-{\varepsilon}$ model and wall function method were used for analysis of turbulent flow. Multi-block grid system was used for flow field and divided into four domains such as the inlet, outlet, flow field of rotating vane, and tip clearance. Fan rotation was simulated by rotational motion using MRF(Multiple Rotating Reference Frame) in steady, incompressible state flow.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.339-353
• /
• 1997

Fiber reinforced plastic (FRP) rods provide certain benefits over steel as concrete reinforcement, such as corrosion resistance, magnetic and electrical insulation, light weight, and high strength. FRP composites can be combined with a steel core to form hybrid reinforcing rods that take advantage of properties of both materials. The objective of this study was to characterize the bond behavior of hybrid FRP rods made with braided epoxy-impregnated aramid or poly-vinyl alcohol FRP skins. Eleven rod types were tested using two concrete strengths. Specific topics examined were bond strength, slip, and type of failure in concentric pull-out tests from concrete cubes. From analysis of identical pull-out tests on both hybrid and steel rods, information on relative bond strength and behavior were obtained. It is concluded that strength is similar but slip in hybrid rods is much higher. Hybrid rods failed either by pull-out or splitting the concrete block (with or without yielding of the steel core). Experimental data showed consistency with similar test results presented in the literature.

• Macromolecular Research
• /
• 제17권8호
• /
• pp.557-562
• /
• 2009

The free radical polymerization of styrene was initiated with azobis(isobutyronitrile) in the presence of benzene sulfonyl chloride. Analysis of the terminal structures of the obtained polystyrene with $^1H$ NMR spectroscopy revealed the presence of a phenyl sulfonyl group at the ${\alpha}$-end and a chlorine atom at the ${\omega}$-end of each polystyrene chain. The terminal chlorine atom in the polystyrene chains was further confirmed through atom transfer radical polymerization (ATRP) of styrene and methyl acrylate using the obtained polystyrenes as macroinitiators and CuCl/2,2'-bipyridine as the catalyst system. GPC traces of the products obtained in ATRP at different reaction times were clearly shifted to higher molecular weight direction, indicating that nearly all the macroinitiator chains initiated ATRP of the second monomers. In addition, the number-average molecular weights of the polystyrenes increased directly proportional to the monomer conversions, and agreed well with the theoretical ones.