• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.4
• /
• pp.117-126
• /
• 1988

This paper attempts to characterize general tendency in water level fluctuations at paddy fields, that may be important to efficient irrigation water uses Banweol district was chosen to be the study area, and water levels among irrigation practice parameters were measured daily throughout the irrigation periods of 1985-1986. Time series analyses showed that water levels at fields have strong serial correlationships. A rather long term periodicity was also observed from spectral analyses. Correlationships between water levels at adjacent fields ranged 0.4-0.9, indicating wide variations in irrigation practices. The water levels showed little correlationships with meteorological factors like evapotranspiration, nor with irrigation practices like water supply rates. Standard errors of the average water levels were computed for different number of field plots within a block. The results indicated that low level areal coverage of gauging plots may be applied for field monitoring of daily water level fluctuations.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.290-293
• /
• 2017

In this study, the fundamental behavior of microdomains in block copolymer/nanoparticle composite thin films was examined. In this experiment, polystyrene-b-poly(2-vinylpyridine) block copolymer and CdSe nanoparticles having a noncentrosymmetric property were employed. Composite hybrid thin films were produced by a spin coating method, and changes in the internal structure of composite thin films were monitored mainly by transmission electron microscopy. In summary, nanoparticles resided inside the thin film relatively intact, however, the block copolymer microdomains rotated parallel to the electric field direction. This study will be very helpful for future research activities regarding behaviors of heterogeneous composite materials under external fields.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4962-4967
• /
• 2010

Security of the electronic commercial transaction especially through the information communication network is gaining its significance due to rapid development of information and communication related fields. For that, some kind of cryptographic algorithm is already in use for the smart card. However, the growing needs of handling multimedia and real time communication bring the smart card into more stringent use of its resources. Therefore, we proposed a key scheduler block of the smart card to facilitate multimedia communication and real time communication.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.6
• /
• pp.172-182
• /
• 2003

In this study, the back analysis was performed by means of stereo-net, plane failure and block failure method to collapsed fields among the rock slopes designed by standardized criterion, and the internal frictions from the back analysis were compared with those used to reinforcement design. It was concluded that in the result of the analysis by means of stereo net, plain failure and block failure methods, the internal frictions used to re-design of collapsed slope underestimated 10$^{\circ}$, 5$^{\circ}$ and 10$^{\circ}$ in average. At present, the internal friction on the design is used the experience value according to the state of weathering, but internal friction angle by the back analysis on collapsed slope with various methods were more reliable values than those from the present method. And it was concluded that re-design was made extravagantly because the internal friction used to re-design for reinforcement of the collapsed slope was less than back analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.507-509
• /
• 2018

Recently, the research for IoT technologies has been established actively, however the structure of centralized network has been pointed out as the vulnerable points. To solve these problems such as system load and security vulnerability, the research to introduce block chain technology is needed. In this paper, we propose the network domain for convergence of block chain and IoT platform, and describe the advantages from the convergence and various and applicable fields.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.2
• /
• pp.125-130
• /
• 2004

With development of information communications and network environments security importance to the informations deepen as time goes. In this viewpoint, cryptosystem is developing but proportionally cracking and hacking technology is developing Therefore, in this paper we proposed and designed block cryptosystem with byte variable operation. Designed cryptosystem based on byte operation is safe than existed cryptosystem because it is not generate the fixed DC and LC characteristics. Additionally, proposed cryptosystem have high processing rate and authenticated operation. Therefore proposed cryptosystem is considered to many aid in the network fields.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.3
• /
• pp.267-277
• /
• 1997

In this paper, heat conduction characteristics of the cylinder block of a small 3 - cylinder, 4¬stroke gasoline engine were analyzed using the 3 - dimensional finite element method. Based on the experimental data, the engine cycle simulation was carried out in order to obtain the heat transfer coefficient and the temperature of the gas and the mean heat transfer coefficient of the coolant. Heat transfer data of the gas, which were averaged with respect to exposure time to the wall, were taken as convective boundary conditions corresponding to the operating conditions to obtain the temperature fields of the block. Finally silicon nitride(Si3N4) was taken as the material of the block liner in order to investigate its temperature distribution characteristics and compare the results with the original ones.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.4
• /
• pp.33-38
• /
• 2013

Image retrieval is one of the most exciting and fastest growing research fields in the area of multimedia technology. As the amount of digital contents continues to grow users are experiencing increasing difficulty in finding specific images in their image libraries. This paper proposes an efficient image descriptor which uses a local color and texture in the non-overlapped block images. To evaluate the performance of the proposed method, we assessed the retrieval efficiency in terms of ANMRR with common image dataset. The experimental trials revealed that the proposed algorithm exhibited a significant improvement in ANMRR, compared to Dominant Color Descriptor and Edge Histogram Descriptor.

• Journal of the Korean Society of Safety
• /
• v.15 no.1
• /
• pp.19-27
• /
• 2000

This paper numerically deals with combined heat transfer in a enclosure with a block. The block affected by hot wall is located centrally in the enclosure with a radiating gray gas. The discrete ordinate method(DOM) was used for solving the radiative transfer equation. Both laminar and turbulent cases were investigated for various Rayleigh number and standard k-$\varepsilon$ model was adopted to turbulent case. The effects of optical thickness, wall emissivity and fluid-solid thermal conductivity ratio are investigated on the flow and temperature fields. This study shows that as the wall emissivity decreases, the temperature distribution gradually becomes uniform and the heat transfer is reduced in enclosure. It is expected that this study can help to design the energy system related to the combined heat transfer and operate it safely.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.11
• /
• pp.923-930
• /
• 2002

Cooling characteristics of a parallel channel with protruding heat sources using convection and conduction heat transfer are studied numerically. A two-dimensional model has been developed for numerical prediction of transient, compressible, viscous, laminar flow, and conjugate heat transfer between parallel plates with uniform block heat sources. The finite volume method is used to solve the problem. The assembly consists of two channels formed by two covers and one printed circuit board which has three uniform heat source blocks. Six different cooling methods are considered to find out the most efficient cooling method in a given geometry and heat sources. The velocity and temperature fields of cooling medium, the temperature distribution along the block surface, and the maximum temperature in each block are obtained. The results are compared to examine the cooling characteristics of the different cooling methods.