• Annual Conference of KIPS
• /
• 2009.11a
• /
• pp.235-236
• /
• 2009

비휘발성 나노 저장 소자는 고속의 바이트 단위 접근성과 함께 비휘발성을 동시에 갖고 있다. 이와 같은 특징은 차세대 장치로 주목 받을 만큼 오늘날의 컴퓨터 구조에 큰 변화를 줄 수 있는 잠재력을 갖고 있으며 이를 접목한 시스템적인 개발 역시 활발하게 진행되고 있다. 본 논문에서는 기존의 메인 메모리와 나노 저장 소자가 융합된 스토리지 메모리 클래스(SCM) 환경 하에서 입출력시에 원자성(Atomicity)이 보장되도록 설계, 구현된 새도우 블록 기법을 소개하고, 더불어 캐시를 사용하며 발생할 수 있는 데이터 일관성 처리의 보장을 다루었다. 또한 실제 FRAM이 장착된 하드웨어 환경 하에서 개선된 새도우 블록을 동작하여 측정한 성능 결과를 함께 제공한다.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.193-198
• /
• 2009

The H.264/ AVC video coding standard supports the intra prediction with various block sizes for luma component and a 8x8 block size for chroma components. This new feature of H.264/AVC offers a considerably higher improvement in coding efficiency compared to previous compression standards. In order to achieve this, H.264/AVC uses the Rate-distortion optimization (RDO) technique to select the best intra prediction mode for each block size, and it brings about the drastic increase of the computation complexity of H.264 encoder. In this paper, a fast block size decision algorithm is proposed to reduce the computation complexity of the intra prediction in H.264/AVC. The proposed algorithm computes the smoothness based on AC and DC coefficient energy for macroblocks and compares with the nonparametric criteria which is determined by considering information on neighbor blocks already reconstructed, so that deciding the best probable block size for the intra prediction. Also, the use of non-parametric criteria makes the performance of intra-coding not be dependent on types of video sequences. The experimental results show that the proposed algorithm is able to reduce up to 30% of the whole encoding time with a negligible loss in PSNR and bitrates and provides the stable performance regardless types of video sequences.

• Imaging Science in Dentistry
• /
• v.45 no.2
• /
• pp.117-122
• /
• 2015

Purpose: Panoramic radiographs taken using conventional chin-support devices have often presented problems with positioning accuracy and reproducibility. The aim of this report was to propose a new bite block for panoramic radiographs of anterior edentulous patients that better addresses these two issues. Materials and Methods: A new panoramic radiography bite block similar to the bite block for dentulous patients was developed to enable proper positioning stability for edentulous patients. The new bite block was designed and implemented in light of previous studies. The height of the new bite block was 18 mm and to compensate for the horizontal edentulous space, its horizontal width was 7 mm. The panoramic radiographs using the new bite block were compared with those using the conventional chin-support device. Results: Panoramic radiographs taken with the new bite block showed better stability and bilateral symmetry than those taken with the conventional chin-support device. Patients also showed less movement and more stable positioning during panoramic radiography with the new bite block. Conclusion: Conventional errors in panoramic radiographs of edentulous patients could be caused by unreliability of the chin-support device. The newly proposed bite block for panoramic radiographs of edentulous patients showed better reliability. Further study is required to evaluate the image quality and reproducibility of images with the new bite block.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.2
• /
• pp.115-127
• /
• 2006

At the initial design stage, the generation process of the production material information of a building block and the simulation process of the block erection, which are required to perform the production planning and scheduling, have been manually performed by using 2D drawings, data of parent ships, and design experiences. To make these processes automatic, the accurate generation method of the production material information and the convenient simulation method of the block erection using the 3D CAD model, which was generated from the initial hull structural design system early developed by us, were proposed in this study. For this, a 3D CAD model for a whole hull structure was generated first, and the block division method for dividing the 3D CAD model into several building blocks was proposed. The generation method of the production material information for calculating the weight, center of gravity, painting area, joint length, etc. of a building block was proposed as well. Moreover, the simulation method of the block erection was proposed. Finally, to evaluate the efficiency of the proposed methods for the generation of the production material information and the simulation of the block erection, these methods were applied to corresponding processes of a deadweight 300,000 ton VLCC (Very Large Crude oil Carrier). As a result, it was shown that the production material information of a building block can be accurately generated and the block erection can be conveniently simulated in the initial design stage.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.186-186
• /
• 2010

• Korean Circulation Journal
• /
• v.48 no.11
• /
• pp.1012-1013
• /
• 2018

• Clinical Endoscopy
• /
• v.56 no.3
• /
• pp.313-314
• /
• 2023

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2745-2754
• /
• 2011

In this paper, we propose a Peak to Average power Ratio(PAR) reduction algorithm by using the Adaptive Block Coding(ABC). The problem of a PAR due to each sub-carrier overlap phenomenon in the OFDM (Orthogonal Frequency Division Multiplexing) system causes the an increasing in the complexity of the A/D converter in the transmitter and a reduction in the efficiency of the amplifier. The proposed ABC algorithm selects the block coding which provides the lowest PAR value based on the various check bit position. It is shown that a PAR of the ABC algorithm can be reduced from 8.35dB to 6.02dB in 16 sub-carriers compared to theconventional block coding scheme. We also extended the ABC algorithm to a larger number of sub-carriers and estimated their PAR values.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.110-113
• /
• 2012

We propose a very-low-complexity lattice-reduction (LR) algorithm for multi-input multi-output detection in time-varying channels. The proposed scheme reduces the complexity by performing LR in a block-wise manner. The proposed scheme takes advantage of the temporal correlation of the channel matrices in a block and its impact on the lattice transformation matrices during the LR process. From this, the proposed scheme can skip a number of redundant LR processes for consecutive channel matrices and performs a single LR in a block. As the Doppler frequency decreases, the complexity reduction efficiency becomes more significant.

• Journal of Environmental Science International
• /
• v.11 no.11
• /
• pp.1183-1187
• /
• 2002

Existing retaining walls are usually made from only one cast form and any damage must be promptly repaired. However, when a part of a retaining wall is repaired, a gap can be created between the repaired and existing parts, along with an unpleasing visual effect. As such, the whole structure is often reconstructed, rather than repairing one part, resulting in construction waste and possible contamination of the environment. Accordingly, the current study proposes a construction method for a retaining wall that uses separate blocks to downsize of quantity of construction waste. In addition, by changing the color or modifying the block cover a more environmentally friendly retaining wall construction method is achieved.