• Journal of the Korean GEO-environmental Society
• /
• v.14 no.12
• /
• pp.53-60
• /
• 2013

A new type of reinforced earth wall(REW) system is developed with vegetated facing which provides proper environment for long-term vegetation and also applicable to high retaining wall system. Vegetated retaining wall is a green alternative for retaining walls and an effective way to reduce heat island effect than conventional block or concrete systems. Several construction sites using vegetated facing is observed to monitor adaptation state of vegetation and estimate surface temperature of wall facing over two years. It was observed that a number of plants including Siberian chrysanthemum adapt well to the inside of the facing blocks because vegetation bag helps to keep a proper condition for vegetation. According to the results using thermographic camera, average surface temperature of vegetated facing is higher for all ranges of coverage ratio of vegetation. The increment of average surface temperature of vegetated facing is larger than that of non-vegetated facing when the air temperature rises, and vice versa.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.71-78
• /
• 2012

Recycled aggregates are made from construction wastes, and they have many national and social benefits by saving energy, developing substitute resources, and protecting environment. However, low-quality recycled aggregate with low density and high absorption rate cannot be used for structural concrete aggregate but is used mainly for low added value. Therefore, this study aims to identify the characteristics of the materials of recycled aggregates made after crashing and pulverizing waste concrete. For this, their major physical characteristics of cement content, absolute dry density, absorption rate, etc. were reviewed to make a mix design (draft) for the production of the secondary product and performance evaluation was done on the bending strength, absorption rate, bending strength after freezing and thawing, compressive strength, air-dried gravity, etc. of the test products produced by applying the mix design to compare the results with the quality standards of GR mark. The results of the tests showed that the substitution rate of recycled aggregate increased to 50~90 %, which is of superior quality than the performance standards of GR F 4007. Therefore, it is thought that they can be used for various construction works with certain physical characteristics applicable to the production of secondary concrete products using recycled aggregates.

• Korean Journal of Remote Sensing
• /
• v.34 no.5
• /
• pp.749-762
• /
• 2018

In this study, the changes of the sunshine environment due to the construction of buildings were analyzed by season. Using a geographic information system (GIS) data, the topography and the buildings were constructed around Pukyong National University (PKNU) in Busan. The numerical model was performed for a week in each season, before and after the construction of buildings. Even before the construction of the high-rise building complex, the area of sunshine block is wide due to the apartment complex located in the southeast of the PKNU campus and the mountain in the south. After the construction, the sunshine-blocked area became wider after the sunrise and before the sunset. The area of sunshine block after 1 hour at sunrise increased by 1.60%, 1.50%, 1.58% and 1.36% in the vernal equinox, summer solstice, autumnal equinox and winter solstice, respectively. The building complex in the east (south) of the PKNU campus made shadow in more than 1,000 m (750 m) toward the west (east) just before the sunrise (sunset). Especially, the sunshine duration in PKNU campus decreased by 46.61%, 22.75%, 58.56%, and 11.31% in the vernal equinox, summer solstice, autumnal equinox and winter solstice, respectively. The analysis of the sunshine duration for a dormitory building showed that the construction of the building complex in the south of the PKNU campus reduced the sunshine area of the western (southern) wall of the dormitory by 30.91% (49.45%) for a winter week.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1131-1137
• /
• 2005

An orthogonal frequency division multiplexing(OFDM) system has the problem of peak-to-average power ratio (PAPR) due to the overlapping phenomena of many sub-carriers. In order to improve the performance of PAPR, we propose in this paper a new genetic sub-block phase weighting(GA-SPW) using the SPW technique. Not only the selecting mapping(SLM) and the partial sequence(PTS) but also the previously proposed SPW becomes more effective as the number of sub-blocks and phase elements increases. However, all of them have limitation on the number of sub-blocks since the searching repetition increases exponentially as the number of sub-blocks increases. Therefore, in this research, a new GA SPW is proposed to reduce the amount of calculation by using Genetic algorithm(GA). In the proposed method, the number of calculations involved in the iterative phase searching yields to depend on the number of population and generation not on the number of sub-blocks and phase elements. The superiority of the proposed method is presented in the experimental results and analysis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.12
• /
• pp.1765-1772
• /
• 2002

Three experiments were conducted to determine the feed processing method best suited for early and conventionallyweaned pigs, and to investigate the effects of different extrusion temperatures on ileal digestibility of amino acids in diets containing different protein sources. In exp.1, a total of 108 pigs (Landrace${\times}$Yorkshire${\times}$Duroc; 24 d of age and 7.60 kg average body weight) were alloted on the basis of sex, weight and ancestry to three treatments in a randomized complete block design. Feed processing methods used were mash (M), simple pellet (SP), and expanded pellet (EP). In exp. 2, a total of 96 pigs (Landrace${\times}$Yorkshire${\times}$Duroc; 14 d of age) were allotted on the basis of sex, weight, and ancestry to three treatments in a randomized complete block design. Diets were mash (M), expanded pellet (EP), and expanded pellet crumble (EPC). In exp. 3, a study was designed to investigate the effect of different extrusion temperatures (100, 120, and $140^{\circ}C$) over the control (untreated) on the ileal digestibility of amino acids in diets containing protein sources such as spray-dried plasma protein (SDPP), whey protein concentrate (WPC), and fish meal (FM). Results in exp.1 showed that ADG, ADFI and the F/G ratio of pigs fed the SP diet were improved (p<0.05) compared with those fed the M or the EP diets, but the digestibility of nutrients was not different (p>0.05) among the treatments. In exp. 2, pigs fed expanded pellet treatments (EP or EPC) had a significantly improved (p<0.05) F/G ratio compared to the pigs fed the M diet which was primarily attributed to the significant reduction (p<0.05) in ADFI, but the overall growth rate of pigs fed expanded pellet diets was not improved. In exp. 3, there was a significant interaction effect (p<0.05) between the extrusion temperature and protein source on the ileal digestibility of amino acids. With an extrusion temperature of $100^{\circ}C$, the ileal digestibility of Lys, Val, Gly and Ser was significantly lower in the diet containing WPC compared to the diet containing SDPP. Increasing the temperature to $120^{\circ}C$ led to significant differences (p<0.05) in the digestibility of Thr and Tyr between diets containing WPC and SDPP. Regardless of extrusion temperatures, the weaned pigs' diet containing either SDPP or FM had significantly higher Lys, Phe, Thr, Val, and Gly digestibility relative to the WPC diet. Results of the present study suggest that simple pelleting of diets containing protein sources such as whey protein concentrate, spray-dried plasma protein and fish meal would be better than the extruded or expanded pellet diets. Extruder or expander processing of weaned pigs' feed could reduce palatability and ileal digestibility of several amino acids and therefore may be responsible for a negative growth response in weaned pigs.

• Journal of the Korean Chemical Society
• /
• v.47 no.6
• /
• pp.601-607
• /
• 2003

We studied on preparation of nanoparticles modified surface using biodegradable polymer, poly(DL-lactide-co-glycolide) (PLGA). Two kinds of PLGA nanoparticles were prepared by a spontaneous emulsification solvent diffusion (SESD) method using cetyltrimethylammonium chloride (CTAC) and tetradecyltrimethylammonium bromide (TTAB) as a cationic surfactant and polyethylene glycol-block-polypropylene glycol copolymer (Lutrol F68) as a nonionic surfactant. Model protein was coated on the surface of nanoparticles by the ionic complexation. The model protein was that influenza vaccine ($H_3N_2,\;H_1N_1$, B strain) labeled with NHS-fluorescein. The sizes of cationic nanoparticles were 140-160 nm and the surface charges were 50-60 mV. The sizes of nonionic nanoprticles were 80-90 nm and the surface charge was -10 mV. After coating vaccine on the surface of nanoparticles, the sizes of cationic nanoparticles were increased to 380-400 nm and the size of nonionic nanoparticles was not increased. The amount of coated vaccine on the cationic nanoparticles was 22.73 ${\mu}g$/mg.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.493-504
• /
• 2005

This study was performed to investigate the compatibility between 4 dentin adhesives and 4 resin luting cements. Dentin adhesives used in this study were All-Bond 2 (Bisco Inc., Schaumbrug, IL, USA), Clearfil SE-Bond (Kuraray Medical Inc, Osaka, Japan), Prompt L-Pop (3M Dental Products, St. Paul, MN, USA), One-Up Bond F (Tokuyama corp., Tokyo, Japan) Resin luting cements used in this study were Choice (Bisco Inc., Schaumbrug, IL, USA), Panavia F (Kuraray Medical Inc, Osaka, Japan), RelyX ARC (3M Dental Products, St. Paul, MN, USA) Bistite II DC (Tokuyama corp., Tokyo, Japan). Combination of each dentin adhesive and corresponding resin cement was made to 16 experimental groups. Flat dentin surfaces was created on mid-coronal dentin of extracted mandibular third molars, then dentin surface was polished with 320-grit silicon carbide abrasive papers. Indirect resin composite block (Tescera, Bisco) was fabricated. Its surface for bonding to tooth was polished with silicon carbide abrasive papers Each dentin adhesive was treated on tooth surface and resin composite overlay were luted with each resin cement. Each bonded specimen was poured in epoxy resin and sectioned occluso-gingivally into 1.0mm thick slab, then further sectioned into $1.0{\times}1.0mm^2$ composite-dentin beams. Microtensile bond strength was tested at a crosshead speed of 1.0mm/min. The data were analysed by one-way ANOVA and Duncan's multiple comparison tests The results of this study were as follows, 2-step self-etching dentin adhesive which has additional bonding resin is more comparison than tests. self-etching dentin adhesive.

• Development and Reproduction
• /
• v.21 no.1
• /
• pp.47-54
• /
• 2017

Unlike mouse results, cloning efficiency of nuclear transfer from porcine induced pluripotent stem cells (piPSCs) is very low. The present study was performed to investigate the effect of cell cycle inhibitors on the cell cycle synchronization of piPSCs. piPSCs were generated using combination of six human transcriptional factors under stem cell culture condition. To examine the efficiency of cell cycle synchronization, piPSCs were cultured on a matrigel coated plate with stem cell media and they were treated with staurosporine (STA, 20 nM), daidzein (DAI, $100{\mu}M$), roscovitine (ROSC, $10{\mu}M$), or olomoucine (OLO, $200{\mu}M$) for 12 h. Flow Cytometry (FACs) data showed that piPSCs in control were in G1 ($37.5{\pm}0.2%$), S ($34.0{\pm}0.6%$) and G2/M ($28.5{\pm}0.4%$). The proportion of cells at G1 in DAI group was significantly higher than that in control, while STA, ROSC and OLO treatments could not block the cell cycle of piPSCs. Both of viability and apoptosis were affected by STA and ROSC treatment, but there were no significantly differences between control and DAI groups. Real-Time qPCR and FACs results revealed that DAI treatment did not affect the expression of pluripotent gene, Oct4. In case of OLO, it did not affect both of viability and apoptosis, but Oct4 expression was significantly decreased. Our results suggest that DAI could be used for synchronizing piPSCs at G1 stage and has any deleterious effect on survival and pluripotency sustaining of piPSCs.

• Molecules and Cells
• /
• v.25 no.3
• /
• pp.390-396
• /
• 2008

Calreticulin (CRT) is one of the major $Ca^{2+}$ binding chaperone proteins of the endoplasmic reticulum (ER) and an unusual luminal ER protein. Postnatally elevated expression of CRT leads to impaired development of the cardiac conductive system and may be responsible for the pathology of complete heart block. In this study, the molecular mechanisms that affect $Ca^{2+}$-dependent signal cascades were investigated using CRT-overexpressing cardiomyocytes. In particular, we asked whether calreticulin plays a critical role in the activation of $Ca^{2+}$-dependent apoptosis. In the cells overexpressing CRT, the intracellular calcium concentration was significantly increased and the activity of PKC and level of SECAR2a mRNA were reduced. Phosphorylation of Akt and ERKs decreased compared to control. In addition the activity of the anti-apoptotic factor, Bcl-2, was decreased and the activities of pro-apoptotic factor, Bax, p53 and caspase 8 were increased, leading to a dramatic augmentation of caspase 3 activity. Our results suggest that enhanced CRT expression in mature cardiomyocytes disrupts intracellular calcium regulation, leading to calcium-dependent apoptosis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1643-1648
• /
• 2006

To investigate the effects of feeding restricted on growth, carcass characteristics and plasma profiles in an attempt for optimum responses, a total of 108 cross-bred finishing barrows [(Landrace${\times}$Yorkshire)${\times}$Duroc]weighing an average of $46.88{\pm}0.52kg$ were assigned in a randomized complete block (RCB) design to one of four treatments with three replicates and nine pigs per pen. Feeding regimens were, 1) ad libitum from 50 kg to market weight (Ad 3/3), 2) restricted feeding from 90 kg to market weight (Ad 2/3), 3) restricted feeding from 70 kg to market weight (Ad 1/3), and 4) restricted feeding from 50 kg to market weight (Ad 0/3). During the experimental period, average daily feed intake (ADFI) was decreased from 2.53 kg (AD 3/3) to 2.09 kg (AD 0/3) with increasing restricted feeding duration of (p<0.05). Average daily gain (ADG) of AD 3/3 (0.79 kg) was significantly higher (p<0.05) than those of AD 1/3 (0.74 kg) or AD 0/3 (0.72 kg). Feed efficiency was not influenced by restriction regimens. Blood IGF-I concentrations were increased from 74.14 to 134.25 (167.36-115.66) ng/ml as body weight increased. Blood leptin concentrations were affected by feed intake level and coincided with blood IGF-I concentrations. Most of carcass characteristics were not significantly affected by restricted feeding, however cooking losses in AD 1/3 and Ad 0/3 treatment diet were higher than those in Ad 3/3 and Ad 2/3. In addition, there was a trend that backfat thickness was lowered in proportional to decreasing feed intake (p>0.05). In conclusion, restricted feeding improved feed efficiency after 50 kg body weight without deteriorating the pork quality of barrows.