• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.947-950
• /
• 1999

The PLD design of new scheme LCD driver circuit is described in this paper. A new scheme LCD driver circuit doesn't used microprocessor for the convenience of users. A new scheme LCD driver circuit consists of 4 main parts, that is, a serial/parallel communication control block part, a LCD controller part, a LCD driver part and a RAM/ROM control block part. The validity and efficiency of the proposed LCD driver circuit have been verified by simulation and by ALTERA EPM7192SQC160-15 PLD implementation in VHDL. After comparing this LCD driver circuit to specify it was verified that the developed LCD driver circuit showed has good performances, such as low cost, convenience of users.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.4
• /
• pp.406-416
• /
• 1994

In this study the reactor design procedure and method of solid-solid-gas chemical heat pump system using STELF technology were investigated. For manufacturing IMPEX block which is the kernel of reactor, proper salt pair should be selected, and equilibrium temperature drop and COP should be examined for selected salt pair. Moreover, apparent density, residual porosity, and graphite ratio should be calculated to give minimum block volume and mass, and maximum energy density without causing heat and mass transfer problems. Since heat exchange area can be changed with operating condition, reactor diameter, length, and stainless steel thickness should be decided for desired specifications. These procedure and method were applied to the case study of 6kW cold production and 8 hours storage capacity reactor.

• Korean Journal of Child Studies
• /
• v.22 no.2
• /
• pp.1-13
• /
• 2001

For the development of a short form of the Korean Wechsler Preschool and Primary Scale of Intelligence (K-WPPSI), 360 preschool and primary school children were tested with 4 subtests: Object Assembly, Arithmetic, Block Design, and Comprehension. Transformed scores were derived according to K-WPPSI norms. Interscorer reliability coefficients measured by two independent scorers with the data of 16 children were satisfactory: Comprehension, .92; Arithmetic, .94; Block Design, .97; Object Assembly, .97 Cronbach alpha reliability coefficient for the 4 subtests were very similar to those for the original K-WPPSI, ranging between .71 and .92. Factor analyses revealed 2 factors corresponding to Wechsler's 2 factor theory of intelligence. Discriminant validity was obtained with a Picture-Vocabulary test. Boys performed slightly better than girls on all subtests except for Comprehension. Boys significantly out-performed girls in Arithmetic.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.81-83
• /
• 2006

This Paper suggests efficient design method which is used by Bit_Inerleaver in the IEEE 802.15,3.a. Bit_Interleaver is consist of Symbol_Interleaver and Tone_Interleaver Each Interleaver is designed by using memory. In other to resolve burst error, Block Interleaver is using different leading and writing address for mixing the data. However This method has a different reading and writing memory address to realize Block Interleaver so this schematic is some complex. This Paper suggests efficient and simple Bit_Interleaver Method which classify the memory of Bit_Interleavr to reduce complexity of shcemeatic.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.398-403
• /
• 1998

This paper describes a controller design for the stator reactive power generator in the transmission system. The controller of static reactive power generator was designed using a mathematical model and non-linear state feedback. The performance of controller was verified using computer simulation with EMTP code and experimental work with scaled-model. The dynamic interaction with a simple power system was also analyzed using both the simulation model and hardware scaled-model. Both simulation and experimental results prove that the controller using PI block and non-linear state feedback offers better performance than the controller using PI block only.

• Journal of the Korean Statistical Society
• /
• v.15 no.1
• /
• pp.9-25
• /
• 1986

In this paper we propose a distribution-free rank test for ordered alternatives in a randomized block design and investigate the properties of the proposed test. The proposed test is an extension of the Page test to allow replications in each cell. Some asymptotic properties including ARE's are investigated. A small sample Monte Carlo study was performed to compare the powers of the test considered in this paper for small samples. The results show that our proposed test is robust and efficient in the case of equally-spaced treatment effects.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.57-68
• /
• 1995

An upper bound elemental technique (UBET) program has been developed to predict forging load, die-cavity filling, preform in non-axisymmetric forging. To analyze the process easily, it is suggested that the deformation is divided into two different parts. Those are axisymmetric part in corner, plane-strain part in lateral. The plane-strain and axisymmetric parts are combined by building block method. And the total energy is computed through combination of three deformation parts. A dumbbell-type preform has been obtained from height and volumetric compensations of the billet based on the backward simulation. Experimetns have been carried out with pure plasticine at room temperature. Theoretical predictions are in good agreement with expereimental results.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.584-586
• /
• 1997

The orthogonal polynomials have been widely employed to solve control problems, but the LQG(linear quadratic gaussian) problem remains unsolved. In this paper, we obtained the solutions of Riccati equation and covariance matrix Riccati equation by two point boundary problem and matrix fraction method using BPF(Block Pulse Function), respectively. This solutions are solved the problem of the LQG controller design.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.198-205
• /
• 2005

Reduction of labor hour for cleaning up of the used abrasives after blasting. is attempted by improving the efficiency of abrasive recovery process in the protective coating of ship's block, For this purpose, the theoretical background for pneumatic transport technology in the abrasive recovery system as well as experimental evaluation on the effect of design parameters such as flow pattern, saltation velocity and pressure drop on the efficiency of the abrasive recovery system are employed . By optimizing the operating parameters such as the length and diameter of the suction hose, specification of recovery device and recovery mouth, a new method which can dramatically increase the efficiency of abrasive recovery system, is proposed.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.6
• /
• pp.374-381
• /
• 2009

To meet the soaring demand recently, South Korea big shipbuilders are examining two things. One is new investment in plant and equipment. The other is replacement of production resources. Considering plant & equipment investment and replacement of production resources, even if actual production ability would be enough, the real output could be affected by limitation of logistics with lack of analysis. As we set up big shipyard in virtual space, we could perform actual production by using confirm production plan in virtual space. We've analyzed the load of block stock, load of road and load of transporter for logistics effects are followed by production increase. This research is to determine the possible problems of those analyzed results and to present the resolution using the current layout. And then modified yard layout, we reanalyzed previous three logistics effects. This simulation model could help administrator to make rational decision for changing yard layout.