• The Korean Journal of Applied Statistics
• /
• v.29 no.7
• /
• pp.1421-1428
• /
• 2016

This paper concerns the freshness of rice depending on packing materials using MANOVA. Freshness of rice is measured in terms of moisture content and rice flavor. Ordinary paper and charcoal-coated paper are compared as packing materials. Storing places are considered as a block. The bivariate observations of moisture content and the rice flavor are compared using MANOVA for a completely randomized block design. It is observed that there is a significant difference between ordinary paper and charcoal-coated paper. Therefore we apply ANOVA for moisture content and rice flavor, respectively. Significant differences are observed for the moisture content but not for the rice flavor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.62-67
• /
• 2003

This paper is concerned with the design of the beam forming module that is a key unit of the active phased array antenna(APAA) system for mobile satellite communications. This module includes two blocks for main signal and tracking signal. Main signal block has the role of transmitting input signal from phased array antenna to tracking signal block. And, tracking signal block executes main roles, beam forming of tracking signal and electronic beam control. The several electrical performances of this module, phase characteristics and linear gain, etc., agreed with specifications needed fur APAA, and for more clear verification of the performances, the satellite communication test of the APAA including the modules was accomplished in the outdoors.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.1
• /
• pp.36-44
• /
• 2008

This paper proposes a modeling and simulation process of a panel production line (PPL) in a shipyard. The panel production line is an assembly process to produce a main panel of a flat block and a curved block. In this paper, its activity analysis is carried out using expression of IDEF0, and its process is qualitatively and quantitatively analyzed and modeled by Petri Nets. A commercial discrete event simulation tool, $QUEST^{TM}$, is used for virtual PPL and simulation. The modeling results by Petri Net are mapped to elements of the simulation tool. Finally, an integrated simulation environment of PPL is implemented in order to efficiently utilize the virtual PPL model. With the help of IDEF0 and Petri Nets, we could systematically analyze and describe the PPL process that are characterized as being concurrent, asynchronous, distributed, parallel, nondeterministic, and/or stochastic. Also, the dynamic and concurrent activities of a PPL system were able to be simulated. A timing concept can be included into the Petri nets model to evaluate performance and dependability issues of the system.

• Journal of Internet Computing and Services
• /
• v.6 no.3
• /
• pp.1-16
• /
• 2005

This paper propose not only MDIT(Mobile Digital Investment Trust) agent design for Trust Investment under Mobile E-commerce environment, but also the symmetric key algorithm 3BC(Bit, Byte and Block Cypher) and the public encryption algorithm F2mECC for solving the problems of memory capacity, CPU processing time, and security that mobile environment has. In Particular, the MDIT Security Agent is the banking security project that introduces the concept of investment trust in mobile e-commerce, This mobile security protocol creates a shared secrete key using F2mECC and then it's value is used for 3BC that is block encryption technique. The security and the processing speed of MDIT agent are enhanced using 3BC and F2mECC.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.290-293
• /
• 2001

The mid-schedule planning of the ship is making a schedule about the process from cutting to erection. The ship consists of lots of blocks. This block has different process because of the shape of the block varies in accordance with the ship-type and the part position of the ship. The type and order of each block process initially must be generated for the mid-schedule planning. In this paper, the process planning, described as above is preparing the basic information before scheduler make a plan with the prepared manhour. The scheduling is done with this process planning which includes the information of the process order. This paper shows the research about three methods to design the process planning. First, investigate the expression method about information of the process planning for the mid-schedule planning in real workplace. Second, design the object of the process planning on the basis of investigating the expression method. Finally, develop the prototype of object on the basis of this designed process planning and then find the practical use in the mid-schedule planning. The object, which is developed in this paper, contains the main algorithm. In case of developing The Mid-Schedule Planning System, this object is expected to be utilized very easily as consisting another object.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.44-54
• /
• 2012

Because of the intrinsic lack of internal-system observability and controllability in highly integrated multicore processors, very restricted access is allowed for the debugging of erroneous chip behavior. Therefore, the building of an efficient debug function is an important consideration in the design of multicore processors. In this paper, we propose a flexible on-chip debug architecture that embeds a special logic supporting the debug functionality in the multicore processor. It is designed to support run-stop-type debug functions that can halt and control the execution of the multicore processor at breakpoint events and inspect the possible causes of any errors. The debug architecture consists of the following three functional components: the core debug support block, the multicore debug support block, and the debug interface and control block. By embedding this debug infrastructure, the embedded processor cores within the multicore processor can be debugged simultaneously as well as independently. The debug control is performed by employing a JTAG-based scanning operation. We apply this on-chip debug architecture to build a debugger for a prototype multicore processor and demonstrate the validity and scalability of our approach.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.8
• /
• pp.637-642
• /
• 2014

In this paper, we propose a efficient shift index searching algorithm for design of the block LDPC codes. It is combined with the message-passing based cycle search algorithm and ACE algorithm. We can determine the shift indices by ordering of priority factors which are effect on the LDPC code performance. Using this algorithm, we can construct the LDPC codes with low complexity compare to trellis-based search algorithm and save the memory for storing the parity check matrix.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.40-45
• /
• 2008

This paper proposes the signal design techniques of quasi-orthogonal space time block codes (QO-STBCS) on the multi-dimensional signal space. In the multiple antenna system(MIMO), QO-STBC achieves the full-diversity and full-rate by grouping two based-symbols. We study the condition for the full-diversity of the grouping QO-STBC geometrically and the performance analysis of codes on the multi-dimensional signal space regarding the various signal constellations. Simulation results show that the way of the performance analysis is validity.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.205-211
• /
• 2007

In this paper, foam-composite sandwich structures for EDM machine tool components such as column and column block designed by controlling stacking sequences and cross-sectional dimensions of the composite structures. The original column block is a box-shaped structure made of aluminum connecting a column and a Z-stage of the system. This research was focused on the design of efficient column block structure using a foam-composite sandwich structure which have good bending stiffness and damping characteristics to reduce the mass and increase damping ratio of the system. Vibration tests for getting damping ratio with respect to the stacking angle and thickness of the composites were carried out. Finite element analyses for static defection and vibration behaviour were also carried out to find out the appropriate stacking conditions; that is, stacking sequence and rib configuration. From the test and analysis results it was found that composite-foam sandwich structures for the microfactory system can be successful alternatives for high precision machining.

• International journal of steel structures
• /
• v.18 no.4
• /
• pp.1139-1152
• /
• 2018

Many studies on the application of stainless steels as structural materials in buildings and infra-structures have been performed thanks to superior characteristics of corrosion resistance, fire resistance and aesthetic appeal. Experimental investigation to estimate the ultimate strength and fracture mode of the fillet-welded connections of cold-formed austenitic stainless steel (STS304L) with better intergranular corrosion resistance than that of austenitic stainless steel, STS304 commonly used has carried out by authors. Specimens were fabricated to fail by base metal fracture not weld metal fracture with main variables of weld lengths according to loading direction. All specimens showed a block shear fracture mode. In this paper, finite element analysis model was developed to predict the ultimate behaviors of welded connection and its validity was verified through the comparison with test results. Since the block shear behavior of welded connection due to stress triaxiality and shear-lag effects is different from that of bolted connection, stress and strain distributions in the critical path of tensile and shear fracture section were investigated. Test and analysis strengths were compared with those by current design specifications such as AISC, EC3 and existing researcher's proposed equations. In addition, through parametric analysis with extended variables, the conditions of end distance and longitudinal weld length for block shear fracture and tensile fracture were suggested.