• 제목/요약/키워드: block design

검색결과 3,009건 처리시간 0.033초

A Study on the Optimum Design of Cylinder Block in Swash Plate Type Oil Hydraulic Piston Pump

  • Baek, Il-Hyun;Cho, Ihn-Sung;Jung, Jae-Youn;Choi, Byung-In;Oh, Seok-Hyung
    • KSTLE International Journal
    • /
    • 제8권2호
    • /
    • pp.29-34
    • /
    • 2007
  • Recently, requirements relating to performance, environment and noise in the oil hydraulic system of the heavy construction equipment have been reinforced continuously. In order to solve these technical trends, studies on the system compactness, operation under high pressure and great rotating speed, electronic control, substitute oil, and noise reduction have been progressed briskly. Among these recent studies, the system operation under high pressure is quite difficult to carry into effect due to mechanical limitations; that is, for realizing the system operation in the hydraulic pump under high pressure, the improvements or innovations on the design techniques, the manufacturing techniques, and the lubrication performance of the working oil are required. Accordingly, in this study, the stress distribution and optimum design factors under the maximum pressure were discussed by using stress analysis on the cylinder block of the hydraulic axial piston pump, which is one of the most important relative sliding regions.

소형 트랙터용 전자제어 직접 분사식 디젤 엔진 고강도 실린더 블록의 설계에 관한 연구 (A Study on Design of High strength Cylinder Block about Common Rail Direct Injection Diesel Engine for Small Tractor)

  • 남석주;박성호;김규태;김귀남
    • 한국산업융합학회 논문집
    • /
    • 제26권4_2호
    • /
    • pp.649-656
    • /
    • 2023
  • Recently, global warming has become severe, and regulation is established for carbon savings each field. its regulation is applied to various fields using IC engine such as automobile, ship, agricultural machine. Therefore engine block applied Common Rail Direct Injection(CRDI) technology, that carry out thermal-structure analysis to examine design. The thermal load about 900℃ by explosion was applied in cylinder. And pressure about 9 MPa(90 Bar) was applied to structure analysis. As a result, it was the highest at 185.99℃ at the top of cylinder. Static-structure analysis applied thermal load, that was shown maximum equivalent stress at 142.59 Mpa and Maximum principal stress 145.03 MPa, Minimum principal stress -149 MPa. When compare analysis results to material property, it design is safety structurally.

Unknown Inputs Observer Design Via Block Pulse Functions

  • Ahn, Pius
    • Transactions on Control, Automation and Systems Engineering
    • /
    • 제4권3호
    • /
    • pp.205-211
    • /
    • 2002
  • Unknown inputs observer(UIO) which is achieved by the coordinate transformation method has the differential of system outputs in the observer and the equation for unknown inputs estimation. Generally, the differential of system outputs in the observer can be eliminated by defining a new variable. But it brings about the partition of the observer into two subsystems and need of an additional differential of system outputs still remained to estimate the unknown inputs. Therefore, the block pulse function expansions and its differential operation which is a newly derived in this paper are presented to alleviate such problems from an algebraic form.

고강도 폴리머 콘크리트보의 등가직사각형 응력분포 (Distribution of the Equivalent Rectangular Stress Block for High-Strength Polymer Concrete Beams)

  • 김관호;연규석;김남길;조규우
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.915-920
    • /
    • 2001
  • This study was conducted to analysis the distribution of the rectangular stress block for high-strength polymer concrete beam. C-shaped specimens were produced and tested to compute parameters of the rectangular stress block. They were $\kappa_{1}$ = 0.73, $\kappa_{3}$ = 0.94 and $\gamma$= 0.845, respectively. Experimental value of flexural strength of beam was same to be compared with theoretical value. But there is desirable to need many experimental data in order to exact design of polymer concrete structure.

  • PDF

행렬부호 함수에 의한 선형 이산치 대단위 계토의 블럭-분해 (Block-decomposition of a Linear Discrete Large-scale systems Via the Matrix Sign Function)

  • 천희영;박귀태;권성하;이창훈
    • 대한전기학회논문지
    • /
    • 제35권11호
    • /
    • pp.511-518
    • /
    • 1986
  • An algorithm for block-decomposition of a linear, time-invariant, discrete large-scale systems is presented, based upon the matrix sign function on Z-plane. The block-decomposition is performed by defining a reference circle, a circular stripe and projection operators. Simulation study shows that the presented algorithm is very useful for multivariable control system's analysis and design.

  • PDF

Audio Sampling Rate Conversion Block의 설계 (Design of Audio Sampling Rate Conversion Block)

  • 정혜진;심윤정;이승준
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 II
    • /
    • pp.827-830
    • /
    • 2003
  • This paper proposes an area-efficient FIR filter architecture for sampling rate conversion of hi-fi audio data. Sampling rate conversion(SRC) block converts audio data sampled at 96KHz down to 48KHz sampled data and vice versa. 63-tap FIR filter coefficients have been synthesized that gives 100dB stop band attenuation and 5.2KHz transition bandwidth. Time-shared filter architecture requires only one multiplier and accumulator for 63-tap filter operation. This results in huge hardware saving of up to 10~19 times smaller compared with traditional FIR structure.

  • PDF

고속블럭정합 알고리즘을 위한 실시간 영상프레임 데이터 처리 제어 방법의 설계 및 구현 (A Design and Implementation of Real-time Video frame data Processing control for Block Matching Algorithm)

  • 이강환;황호정
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
    • /
    • pp.373-376
    • /
    • 2001
  • This paper has been studied a real-time video frame data processing control that used the linear systolic array for motion estimation. The proposed data control processing provides to the input data into the multiple processor array unit(MPAU) from search area and reference block data. The proposed data control architecture has based on two slice band for input data processing. And it has no required external control logic blocks for input data as like reference block or search area data.

  • PDF

Space-Time Block Code에서의 성능에 관한 연구 (A Study on Performance in Space-Time Block Code)

  • 이은희;김종성
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2002년도 가을 학술발표논문집 Vol.29 No.2 (3)
    • /
    • pp.64-66
    • /
    • 2002
  • 공간-시간 부호(Space-Time Code)는 다중 안테나 시스템에서 기존의 기술에 비해서 부가적인 대역폭이 필요 없이 부호화 이득을 얻을 수 있다. 지금까지 공간-시간 부호(Space-Time Code)는 다이버시티 이득의 관점에서는 신호행렬들의 차가 완전-계수(Full-Rank)를 가져야 하고, 코딩 이득의 관점에서는 신호행렬들의 차의 determinant 값이 최소값을 가져야 한다. 본 논문에서는 공간-시간 블록 부호 디자인(Space-Time Block Code) 관점에서 직교-디자인(Orthogonal-design) 즉, 최소거리가 5이면서 완전-계수(Full-Rank)인 디자인을 비교대상으로 완전-계수(Full-Rank)가 아니면서 최소거리가 5와7인두 부호에 관하여 연구되어졌다.

  • PDF

Space-Time Block Code에서의 코드워드(codeword)가 완전계수(Full-Rank)가 아닌 경우에 관한 연구 (A Study on codeword's nonfull-Rank in Space-Time Block Code)

  • 이은희;김종성;최병태
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2002년도 추계학술발표논문집 (중)
    • /
    • pp.1575-1578
    • /
    • 2002
  • 본 논문에서는 공간-시간 블록 부호디자인(Space-Time Block Code) 관점에서 직교-디자인(Orthogonal-design) 즉, 최소거리가 5이면서 완전-계수(Full-Rank)인 디자인을 비교대상으로 완전-계수(Full-Rank)가 아니면서 최소거리가 5와7인 두 부호에 관하여 연구되어졌다.

  • PDF

Perceiving green vs. non-green related objects; A study with fMRI

  • 윤효운;한창환;임동미;조은미;박현욱
    • 대한자기공명의과학회:학술대회논문집
    • /
    • 대한자기공명의과학회 2002년도 제7차 학술대회 초록집
    • /
    • pp.108-108
    • /
    • 2002
  • Purpose: We had hypothesized that the perceiving green related (more natural like forest, woods etc.) objects causes more emotional cue or salience than non-green related objects. Method: Six subjects participated the study. We used a classical block or box car design for the MRI experiment. Six green related and six non-green related pictures were presented 2 sec each as one block. As baseline T and ㅗ shapes were presented in the same fashion as one block.

  • PDF