• 한국치위생학회지
• /
• 제10권6호
• /
• pp.955-963
• /
• 2010

Objectives : The purpose of this study was to examine effect of the application of different types of coffee on teeth stain during home bleaching. Methods : Twenty five premolars that were extracted within the past month and healthy without any signs of dental caries or restorations were collected and divided into five groups. The teeth of a control group were bleached everyday for two weeks, and the teeth of four experimental groups were bleached everyday for two weeks and then deposited respectively in four different types of coffee solution: brewed coffee, black coffee, coffee with sugar, and coffee with sugar and cream. Afterwards, the color of the teeth of the four experimental groups was checked by a shade pilot. Results : As a result, there were significant differences in the change of lightness and color according to the blending type with the lapse of time during home bleaching. Concerning changes in lightness and hue, there were the largest differences in the control group and the experimental group deposited in coffee with sugar and cream, followed by coffee with sugar, black coffee and brewed coffee. When the extent of change in lightness and hue was investigated after home bleaching, the experimental group deposited in coffee with sugar and cream was stained the least, and the experimental group deposited in brewed coffee was stained the most. Conclusions : In conclusion, the intake of coffee that is the cause of stain should be reduced during bleaching, and in case of having a cup of coffee, it's advisable to have coffee with cream.

• 한국의류학회지
• /
• 제35권12호
• /
• pp.1477-1485
• /
• 2011

Dyeability and colorfastness of the blended knits of cotton/rayon (40/60; C/R) and wool/tencel (10/90; W/T) are examined using the natural dyestuff ($Pinux^{TM}$) manufactured from Pinus radiata pine bark extract. In addition, pre-treatments (such as bleaching, mercerization and cationization) are performed to improve dyeability and colorfastness. The $Pinux^{TM}$ powder dyestuffs produced by Pinux Co., Ltd. are used as dyestuffs and their properties are examined for dyeing concentration (0.5-2% (owb)), dyeing time (30-120 minutes) and dyeing temperature (30-$90^{\circ}C$). Dyeability is evaluated with K/S value at 400nm, which is the maximum absorption wavelength for $Pinux^{TM}$. The results show the dyeability of W/T sample containing protein fiber with $Pinux^{TM}$ is superior to all cellulose fiber C/R. A concentration of dyestuff greater than 1.5% (owb), dyeing time 120 minutes and dyeing temperature of $90^{\circ}C$ are the most optimized conditions. It shows that the dyeability of C/R and W/T samples are high in the condition of an acid-dyeing bath and that dyeability highly declined in alkaline bath due to the instability of the proanthocyanidin pigment. After analyzing the effect of bleaching, mercerizing and cationizing (as pre-treatments on dyeability) it was concluded that the dyeability of the C/R sample was enhanced by mercerization but no significant effect by cationization. However, the simultaneous treatment of cationizing and dyeing resulted in far improved dyeability compared to dyeing after cationizing pre-treatment. As for the W/T sample, the effect of cationization was more prominent than the C/R sample. Colorfastness to color changes in the control W/T sample was higher than that of C/R's level 1-2, and it increased to Level 2 when bleaching pre-treatment was given and when a simultaneous cationizing treatment was adopted to the dyeing process. Colorfastness to light in W/T control sample resulted in Level 3 and further increased to an excellent Level of 4 with bleaching and simultaneous cationizing during dyeing process.

• 대한가정학회지
• /
• 제37권4호
• /
• pp.29-40
• /
• 1999

Effects of the commercial laundry detergents, fabric softeners, and bleaches on bactericidal activities were studied. Bactericidal activities under various conditions during washing, rinsing, and bleaching were evaluated in terms of minimum inhibitory concentration(MIC) by a broth dilution method. The experiments were carried out using Staphylococcus aureus and Escherichia coli which were usually employed in antibacterial activity tests. The results are summarized as follows : 1. All samples of Powder detergents(10 samples), soaps(7 samples) and fabric softeners(4 samples) were inactive against the Staphylococcus aureus and Escherichia coli. 2. One sample in the liquid detergents(6 samples) showed a very low MIC for Staphylococcus aureus and Escherichia coli., and three samples showed a selective effect for two bacterial strains. 3. Bleaching agent(containing peroxide) did not have bactericidal effect for Staphylococcus aureus and Escherichia coli. but the other(containing chlorine) had the effect for every bacterial strain in standard concentration. 4. All samples showed bactericidal effect above 60$^{\circ}C$.

• 한국염색가공학회지
• /
• 제7권1호
• /
• pp.32-42
• /
• 1995

In order to reduce the amount of waste water generated from textile dyeing process and processing water, cotton fabric was bleached with ozone in ozone/water contact system, and dyed. The results obtained from the measurement of whiteness, reflectance, tensile strength, color difference, and K/S value of treated samples were as follow : 1) In ozone bleaching, factors affect whiteness most are treatment time and ozone dosage. As treatment time is lengthened, whiteness increases. Futhermore, bleaching effect is high in acidic treatment, but low in alkaline treatment. 2) As bleaching goes on, maximum absorption wave length shifts to shoter wavelengths. 3) As treatment time is lengthened or pH of treatment is low, tensile strenth of treated fabric decrease. 4) In all cases, color difference of dyed cotton fabrics in above 2% o.w.f. dyestuff concentration don't go beyond 1∼2 AN unit, compared with standard.

• 한국잡초학회지
• /
• 제9권3호
• /
• pp.230-237
• /
• 1989

Bleaching herbicides(oxyfluorfen, oxadiazon, paraquat)의 작용발현에 영향을 미치는 온도 및 광의 효과를 조사한 결과 oxyfluorfen 과 oxadiazon의 제초활성은 $10-35^{\circ}C$에서 온도가 증가될수록 높았으며 온도의 효과는 제초작용 발현단계(photooxidation) 보다는 그 이전 단계에서 더욱 큰 영향이었다. 처리약제 모두 광도가 높을수록 활성이 강하였으며 paraquat 는 광질간의 활성차이가 없었으나 oxyfluorfen 및 oxadiazon 은 챙색광에서 높은 활성을 보였고 이들 두 약제에 대한 광의 효과는 광합성 및 호흡의 전자전달계나 carotenoid 생합성 보다는 chlorophyll 생합성 과정과 일정한 관련이 있다.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.1-8
• /
• 2011

The presence of high silica in bamboo hinders the use of this material for production of rayon grade pulp. Research has been carried out to overcome this deficiency and improve quality of rayon grade pulp with the modification in pulping and bleaching process. Effect of acid boosted water prehydrolysis, sulphuric acid pre-treatment of unbleached pulp, chlorination stage at lower pH and treatment of bleached pulp with $SO_2$ water were evaluated. Acid boosted water prehydrolysis of chips reduces prehydrolysis time by 50 minutes as compared to water prehydrolysis. Treatment of unbleached pulp with sulphuric acid reduces ash, acid insoluble, silica, calcium and iron contents of the pulp by 56, 31, 82, 84 and 60% respectively. The addition of acid, increase in kappa factor in $C_D$ stage and combination of both were effective in removing silica in the pulp. Treatment of final bleached pulp with $SO_2$ water removes silica to a great extent and improves optical properties of the pulp as compared to $H_2SO_4$ or PAA. Pretreatment of the pulp with acid and modification in the bleaching process can reduce silica substantially and improve the quality of rayon grade bamboo pulp.

• Restorative Dentistry and Endodontics
• /
• 제43권2호
• /
• pp.20.1-20.9
• /
• 2018

Objectives: The aim of this in vitro study was to evaluate the bond strength of 2 universal adhesives used in different application modes to bleached enamel. Materials and Methods: Extracted 160 sound human incisors were used for the study. Teeth were divided into 4 treatment groups: No treatment, 35% hydrogen peroxide, 16% carbamid peroxide, 7.5% carbamid peroxide. After bleaching treatments, groups were divided into subgroups according to the adhesive systems used and application modes (n = 10): 1) Single Bond Universal, etch and rinse mode; 2) Single Bond Universal, self-etch mode; 3) Gluma Universal, etch and rinse mode; 4) Gluma Universal, self-etch mode. After adhesive procedures nanohybrid composite resin cylinders were bonded to the enamel surfaces. All specimens were subjected to shear bond strength (SBS) test after thermocycling. Data were analyzed using a 3-way analysis of variance (ANOVA) and Tukey post hoc test. Results: No significant difference were found among bleaching groups (35% hydrogen peroxide, 16% carbamid peroxide, 7.5% carbamid peroxide, and no treatment groups) in the mean SBS values. There was also no difference in SBS values between Single Bond Universal and Gluma Universal at same application modes, whereas self-etch mode showed significantly lower SBS values than etch and rinse mode (p < 0.05). Conclusions: The bonding performance of the universal adhesives was enhanced with the etch and rinse mode application to bleached enamel and non-bleached enamel.

• 펄프종이기술
• /
• 제31권5호
• /
• pp.95-100
• /
• 1999

In order to find fungi having high treatment activity of kraft pulp bleaching (E1) effluent without any additional nutrietns, 124 strains of white-rot fungi were isolated from decayed wood samples. The author isolated five fungi(KS-62, MZ-400 , YK-719, YK-472 and Phanerochaete sordida YK-624) having high-decolorization activity of the E1 effluent. Particularly, the fugus KS-62 show the high effect of the decolorization and the degradation of the chlorinated lignin in the E1 , effluent compared with Coriolus versicolor and Phanerochaete chrysosporium.

• 한국염색가공학회지
• /
• 제8권2호
• /
• pp.35-42
• /
• 1996

Peroxodisulfates are being developed as low temperature bleaching agents for cotton fabrics to save the thermal energy. In this research we used the colar difference meter to determine the whiteness which peroxide booster will possibly make an effect on cotton fabric at the low temperature process using consist of temperature with different conditions agents, such as sodium hydroxide, sodium peroxodisulfate and potassium peroxodisulfate. The peroxide bleaching follows a laboratory experiments, using a statistical plan for three variables: the concentrations of hydrogen peroxide and sodium hydroxide and the temperature of bathing. The purpose of this research was to use the response surface analysis method to evaluate the relative importance of factors providing optimum whiteness. A ridge analysis of the data on whiteness response results in 3-D response surface diagrams for optimizing the concentrations of hydrogen peroxide and sodium hydroxide at about 42~52$^{\circ}C$.

• 한국의류학회지
• /
• 제20권5호
• /
• pp.905-914
• /
• 1996

To study the effect of the bleaching agents in detergents on the degradation of cotton fabrics, the carboxyl contents, copper numbers, degree of polymerization, the change of tensile strengths and fiber surfaces of cotton fabric before and after washing were examined. The results obtained were as follows: As the cycles and temperature of washing increased, the carboxyl content of washed cotton fabric changed little but the copper unmber of cotton fabric was increased. At 6$0^{\circ}C$ , 8$0^{\circ}C$ the copper number of cotton fabric washed with soidum perborate (PB) was higher than that of with sodium percarbonate (PC). The degree of polymeriazation and tensile strength of cotton fabric were decreased and at higher temperature those were more decreased but were less decreased when tetraacetyehylenediamine (TAED) was added. The degree of polymerization had negative relation with copper unmber but with tensile strength of cotton fabric had positive relation. Cotton fiber surface was more degraded by bleaching agents and hydrogen peroxide exhaustion was increased as the temperature of washing increased. And hydrogen peroxide exhaustion had negative relation with the degree of polymerization.