• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.33 no.12
• /
• pp.63-70
• /
• 2017

When industrial by-products like slag and fly ash are using in concrete with cement, it improves strength and durability against external deterioration factors by densifying the structure through potential hydraulic and pozzolanic reaction. But it has been pointed out that high dependence on the quality variation and the curing condition using a admixure material for concrete. In this study, the characteristics of internal micropore structure according to curing condition were analyzed for pastes and mortar specimens under using blast furnace slag powder. As a result, the variation of compressive strength and the internal microstructure were observed according to curing conditions by binder type. Particularly, using blast furnace slag powder, decrease in compressive strength were clearly observed in indoor and carbonation curing compared with water curing. The pore structure analysis also clearly observed the decrease of the gel pore existing in the CSH hydrate layer and the increase of the capillary pore in indoor and carbonation curing compared with water curing condition.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.1
• /
• pp.10-19
• /
• 2023

Blast Hardened Bulkhead (BHB) is an important measure that can increase the ship's survivability as well as protect the lives of the crew by mitigating the damage extent caused by an internal explosion in the ship. In particular, both the pressure and the shock impulse should be considered when designing the BHB against reflected shock waves having a high pressure with a short duration. This study proposes a design method for BHB that considers both the pressure and the shock impulse generated during the internal explosion. In addition, analysis and design concepts for accident loads such as explosion, fire, and collision of NORSOK and DNVGL, one of the international design guidelines for the curtain plate type blast hardened bulkhead type applied by the Korean Navy, are utilized. If this method is applied, it is expected that it can be used as a design concept for the pressure as well as the shock impulse of the explosion load of the curtain plate.

• Structural Engineering and Mechanics
• /
• v.91 no.1
• /
• pp.63-73
• /
• 2024

Improving the blast resistance of structural establishments has become an imperative engineering commitment to prevent property damage and fatalities in terrorist incidents. This study investigates the effects of blast mass and stand-off distance on CFRP skin concrete core sandwich bunkers of varying thicknesses using ABAQUS/Explicit software with CONWEP functionality. The considered parameters include TNT masses of 1, 10, and 25 kg and stand-off distances of 0.1, 1, 2, and 2.5 meters on structures with 200, 250, and 500 mm core thicknesses. The study finds that there exists a declining response corresponding to the blasting mass reduction coupled with increases in the stand-off distance and core thickness. The 500 mm thick bunker sustains less damage compared to those with 200 mm and 250 mm core thicknesses. The sandwich configuration remains structurally advantageous vs. those without skins. The sandwich bunker with a 500 mm thick concrete core gives the best performance against the 10 kg TNT blast load with a 1 m standoff distance exhibiting a 22.8% reduction in damage vs. that without skins. Mathematical expressions are then formulated for predicting maximum von Mises stress, principal stress, and displacement of sandwich bunkers as functions of TNT masses, stand-off distances, and core thicknesses.

• Korean Journal of Veterinary Research
• /
• v.27 no.1
• /
• pp.41-45
• /
• 1987

The present study was carried out to investigate the optimal conditions on blastogenesis of guinea pig lymphocytes. A microculture system in conjuction with a semiautomatic multiple sample harvester was used to study the in vitro optimal condition of guinea pig lymphocytes. Careful analysis of lymphocyte transformation to concanavalin A (Con A) and lipopolysaccharide (LPS) mitogen determined optimal conditions as: (a) 10% fetal bovine serum in RPMI-1640 medium (b) 48-hour culture period.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.365-368
• /
• 2002

This paper considers transference number in calculating diffusion coefficient of chloride ions of concrete and mercury intrusion porosimetry to investigate the volume and distribution of pore size, respectively, analyzing and discussing the property of resistance to chloride ion of concrete with granulated blast furnace slag. The experimental results show that the diffusion coefficient of chloride ion decreases with the rise of quantity of granulated blast furnace slag and pore structure of concrete with granulated blast furnace slag is different from that of OPC concrete. And from the results of regression analysis, the result showed that the diffusion coefficient of chloride ions is affected by capillary pore above 50nm.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.444-449
• /
• 2016

Industrial by-products generated by integrated iron and steel manufacture cause environmental pollution. The by-products contain not only iron element but also harmful substances. Therefore, in view of to waste recycling and environmental preservation, production of sponge iron using the by-product is considered an effective recycling method. In this study, reduction efficiency of pellets from blast furnace dust was measured. Metallization was found to be increased, as $C/Fe_{total}$ ratio and reaction time were increased. The pellets were formed into a globular shape, and calcined for 60 minutes at $1100^{\circ}C$ in an electric furnace. Phase changes were analyzed using an X-ray diffractometer. Microstructures of the pellets were observed by a scanning electron microscope.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1691-1698
• /
• 2001

In recent years, significant progress has been made in modeling turbulence behavior in plasma and its effect on transport. It has also been made in diagnostics for turbulence measurement; however, there is still a large gap between theoretical model and experimental measurements. Visualization of turbulence can improve the connection to theory and validation of the theoretical model. One method to visualize the flow structures in plasma is a laser Schlieren imaging technique. We have recently applied this technique and investigated the characteristics of a highly underexpanded pulsed plasma jet originating from an electrothermal capillary source. Measurements include temporally resolved laser Schlieren imaging of a precursor blast wave. Analysis on the trajectory of the precursor blast wave shows that it does not follow the scaling expected for a strong shock resulting from the instantaneous deposition of energy at a point. However, the shock velocity does scale as the square root of the deposited energy, in accordance with the point deposition approximation.

• Journal of Welding and Joining
• /
• v.20 no.4
• /
• pp.551-556
• /
• 2002

Solid particle erosion wear characteristics of high Cr white iron hardfacing were investigated using the erosion wear test method according with the ASTM G76-95. Wear experiments, where the blast angle, blast distance and blast pressure were selected as test variables, were planned and analyzed by response surface method (RSM to evaluate the wear loss statistically and quantitatively. The measured wear losses well coincided with the calculated ones by the experimental equation. The wear loss of high Cr cast iron hardfacing was increased with blasting pressure, but affected in a complicated way by the blasting angle and distance. Erosion wear of high Cr cast iron hardfacing could be well predicted by RSM analysis of wear variables.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.8
• /
• pp.990-997
• /
• 2007

In the last 5 years, collisions of fishing vessels have recorded about 54.6% of the total marine accidents. Specially about 64.0% of these collisions were caused by navigator's negligence of watch keeping during works. The purpose of this paper is to develop vessel detecting system that is able to receive the whistle blast of other vessel and make a warning sound and light when the fishermen can not confirm the approaching another vessel on account of fishing works. It is designed to receive the whistle signal blast by a weather tight microphone. The signal is processed by analog active filter in order to enhance the SNR(Signal to noise ratio). And this microprocessor-based system is programmed to do ADC(Analog to digital converting), FFT analysis, controls of warning sound and light.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.54-55
• /
• 2016

Recently in the construction industry, industrial by-product admixtures like blast-furnace slag fine particles (BS henceforth) are being used as binding material, reducing the use of cement, and measures to reduce CO₂ emissions are being examined on various levels. However, the BS being used domestically varies depending on the origin of resources, and by circulating BS that is inappropriate to the KS standard, problems are occurring in terms of changes and declines in the quality of concrete which uses it. Therefore in this study the liquid densimeter principle was used to assess various BS fineness qualities; with 100 g/L fixed, a 1,000cc mass cylinder was most appropriate for assessing the quality of cement fineness.