• 화약ㆍ발파
• /
• 제35권4호
• /
• pp.1-9
• /
• 2017

본 연구는 인공절리를 이용한 발파효과 검토를 위해 인공절리 수, 인공절리 간격, 인공절리 경사에 따른 발파속도의 영향 및 기여도를 평가 분석한 연구이다. 인공절리 상태 변화에 따른 발파속도는 동적해석 프로그램인 AUTODYN을 이용하여 획득하였다. 수치해석 결과에 대해 정규화 분석을 수행하였고, 각 인자의 기여도 분석을 위해 강건설계 실험계획법을 이용하여 설계 인자를 분석하였다. 각 인자는 3수준으로 설정하였고, 분석에 직교 배열표 $L_9(3^4)$를 사용하였다. 정규화 분석을 통해 수치해석 결과를 분석한 결과 인공절리 경사가 증가함에 따라 발파속도는 감소하는 경향을 보였다. 또한, 인공절리 간격과 인공절리 경사에 대해 발파속도를 분석한 결과 발파속도는 경사가 수직일 때 인공절리 간격이 증가함에 따라 감소는 경향을 보였다. 강건설계를 이용한 기여율 분석결과 발파속도에 가장 큰 영향을 미치는 것은 인공절리 경사이며, 이어서 인공절리 수, 인공절리 간격 순으로 기여율이 평가되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.485-492
• /
• 2005

Since blast-induced vibration may cause serious problem to the rock mass as well as the nearby structures, the prediction of blast-induced vibration and the stability evaluation must be performed before blasting activities. Dynamic analysis has been Increased recently in order to analyze the effect of the blast-induced vibration. Most of the previous studies, however, were based on the continuum analysis unable to consider rock joints which significantly affect the wave propagation and attenuation characteristics. They also adopted pressure curves estimated by theoretical or empirical equations as input detonation load, thus there were very difficult to reflect the characteristics of propagating media. In this study, therefore, we suggested a discontinuum dynamic analysis technique which uses velocity waveform obtained from a test blast as an input detonation load. A distinct element program, UDEC was used to consider the effect of rock joints. In order to verify the validity of proposed method, the test blast was simulated. The predicted results from the proposed method showed a good agreement with the measured vibration data from the test blast Through the dynamic numerical modelling on the planned road tunnel and slope, we evaluated the effect of blast-induced vibration and the stability of rock slope.

• Computers and Concrete
• /
• 제33권6호
• /
• pp.725-738
• /
• 2024

This study presents a macro-modeling procedure for nonlinear finite element analysis of reinforced and prestressed concrete panels under blast loading. The analysis procedure treats cracked concrete as an orthotropic material based on a smeared rotating crack model within the context of total-load secant stiffness-based formulation. A direct time integration method compatible with the analysis formulation is adapted to solve the dynamic equation of motion. Considerations are made to account for strain rate effects. The analysis procedure is verified by modeling 14 blast tests from various sources reported in the literature including a blast simulation contest. The analysis results are compared against those obtained from experiments, simplified single-degree-of-freedom (SDOF) methods, and sophisticated hydrocodes. It is demonstrated that the smeared crack macro-modeling approach is a viable alternative analysis procedure that gives more information about the structural behavior than SDOF methods, but does not require detailed micro-modeling and extensive material characterization typically needed with hydrocodes.

• Structural Engineering and Mechanics
• /
• 제44권4호
• /
• pp.449-463
• /
• 2012

For buildings subjected to blast loading, structural failure can be categorized into local failure (direct blast effects) and progressive collapse (consequential effects). In direct blast effects, the intensive blast pressures create localized failure of structural elements such as exterior columns and walls. Columns, and their behaviour, play a key role in these situations. Therefore investigating the behaviour of columns under blast loading is very important to estimate the strength, safety and reliability of the whole structure. When a building is subjected to blast loading, it experiences huge loading pressures and undergoes great displacement and plastic behaviour. In order to study the behaviour of an element under blast loading, in addition to elastic properties of materials, plastic and elastic-plastic properties of materials and sections are needed. In this paper, using analytical studies and nonlinear time-history analysis by Ansys software, the effects of shape of column sections and boundary conditions, on behaviour and local failure of steel columns under blast load are studied. This study identifies the importance of elastic-plastic properties of sections and proposes criteria for choosing the best section and boundary conditions for columns to resist blast loading.

• 한국육종학회지
• /
• 제40권3호
• /
• pp.215-222
• /
• 2008

Fifty-two Korean japonica rice cultivars were analyzed for leaf blast resistance and genotyped with 4 STS and 26 SSR markers flanking the specific chromosome sites linked with blast resistance genes. In our analysis of resistance genes in 52 japonica cultivars using STS markers tightly linked to Pib, Pita, Pi5(t) and Pi9(t), the blast nursery reaction of the cultivars possessing the each four major genes were not identical to that of the differential lines. Eight of the 26 SSR markers were associated with resistant phenotypes against the isolates of blast nursery as well as the specific Korean blast isolates, 90-008 (KI-1113), 03-177 (KJ-105). These markers were linked to Pit, Pish, Pib, Pi5(t), Piz, Pia, Pik, Pi18, Pita and Pi25(t) resistance gene loci. Three of the eight SSR markers, MRG5836, RM224 and RM7102 only showed significantly associated with the phenotypes of blast nursery test for two consecutive years. These three SSR markers also could distinguish between resistant and susceptible japonica cultivars. These results demonstrate the usefulness of marker-assisted selection and genotypic monitoring for blast resistance of rice in blast breeding programs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.269-272
• /
• 2008

매우 짧은 시간동안 큰 압력을 유발하는 폭발하중은 지형적인 조건 및 대기조건, 장약량과 구조물의 위치 및 형상에 따라 상이하게 발생된다. 그러므로 본 연구에서는 콘크리트 구조물에 작용하는 정밀한 폭발하중의 전파해석을 위해, Arbitrary Lagrangian-Eulerian기법을 적용한 대기 및 폭발물의 모델을 통해 복합적인 폭발파를 구현하고 구조물의 동적재료 특성을 고려하여 대기-구조물의 통합모델 해석기법을 제안하였다. 또한 대기-구조물의 통합모델 해석기법의 검증을 위하여 폭발하중을 받는 철근콘크리트 구조물의 폭발실험결과와 비교함으로써 제안된 해석기법의 타당성을 검증하였다.

• 한국지열·수열에너지학회논문집
• /
• 제17권4호
• /
• pp.79-90
• /
• 2021

This paper presents a study to reduce the effect of blast pressure on the blast valves installed in protection tunnels, where the shape of the tunnel entrance and the blast pocket is optimized based on the predetermined basic shape of the protective tunnels. The reliability of the numerical tunnel models was examined by performing analyses of mesh convergence and overpressure stability and with comparison to the data in blast-load design charts in UFC 3-340-02 (DoD, 2008). An optimal mesh size and a stabilized distance of overpressure were proposed, and the numerical results were validated based on the UFC data. A parametric study to reduce the blast overpressures in tunnel was conducted using the validated numerical model. Analysis was performed applying 1) the entrance slope of 90, 75, 60, and 45 degrees, 2) two blast pockets with the depth 0.5, 1.0, and 1.5 times the tunnel width, 3) the three types of curved back walls of the blast pockets, and 4) two types of the upper and lower surfaces of the blast pockets to the reference tunnel model. An optimal solution by combining the analysis results of the tunnel entrance shape, the depth of the blast pockets, and the upper and lower parts of the blast pockets was provided in comparison to the reference tunnel model. The blast overpressures using the proposed tunnel shape have been reduced effectively.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1389-1397
• /
• 2005

Since blast-induced vibration may cause serious problem to the rock mass as well as the nearby structures, the prediction of blast-induced nitration and the stability evaluation must be performed before blasting activities. Dynamic analysis has been increased recently in order to analyze the effect of the blast-Induced vibration. Most of the previous studies, however, were based on the continuum analysis unable to consider rock joints which significantly affect the wave propagation and attenuation characteristics. They also adopted pressure corves estimated tv theoretical or empirical equations as input detonation load, thus there were very difficult to reflect the characteristics of propagating media. In this study, therefore, we suggested a dynamic distinct element analysis technique which uses velocity waveform obtained from a test blast as an input detonation load. A distinct element program, UDEC was used to consider the effect of rock joints. In order to verify the validity of proposed method, the test blast was simulated. The predicted results from the proposed method showed a good agreement with the measured vibration data from the test blast. Through the dynamic numerical modelling on the planned road tunnel and slope, we evaluated the effect of blast-induced nitration and the stability of rock slope.

• 한국강구조학회 논문집
• /
• 제27권3호
• /
• pp.273-280
• /
• 2015

방폭설계에 가장 널리 사용되고 있는 등가단자유도 해석법은 구조부재의 방폭성능평가에 있어서 중력하중효과를 전혀 고려하지 않고 있다. 그러나 구조물의 기둥 및 벽체의 경우 일반적으로 중력하중이 존재하므로, 이를 고려한 구조부재의 방폭성능을 평가하여야 한다. 이 논문에서는 강재 압축재의 동적 폭발응답 등가단자유도해석에 중력하중효과를 반영하는 방안을 제시하고자 한다. 이를 위하여 압축재의 휨저항력과 고유주기를 일정하게 하고 최대폭발하중 및 지속시간, 중력하중을 달리하여 변수해석을 수행하였다. 등가단자유도해석결과와 유한요소해석결과를 비교하고, 다양한 중력하중을 작용한 경우에 대하여 유한요소해석에 의한 압축재의 폭발응답을 평가하였다. 최종적으로, 폭발하중, 중력하중, 부재특성에 따른 강재 압축재의 소요연성을 도표화하였다. 이 도표를 활용하여 중력하중을 고려한 강재 압축재의 폭발응답을 합리적이고 편리하게 예측할 수 있을 것으로 사료된다.

• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.569-585
• /
• 2013

The use of the rigid polyurethane foam (RPF) to strengthen sandwich structures against blast terror has great interests from engineering experts in structural retrofitting. The aim of this study is to use the RPF to strengthen sandwich steel structure under blast load. The sandwich steel structure is assembled to study the RPF as structural retrofitting. The filed blast test is conducted. The finite element analysis (FEA) is also used to model the sandwich steel structure under shock wave. The sandwich steel structure performance is studied based on detonating different TNT explosive charges. There is a good agreement between the results obtained by both the field blast test and the numerical model. The RPF improves the sandwich steel structure performance under the blast wave propagation.