• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.742-753
• /
• 2005

In this paper, we propose a rapid and reliable signal acquisition scheme for UWB (Ultra Wide Band) systems in typical indoor wireless channels. The proposed scheme is a two-step search with different thresholds and search window applied to a single correlator, where each step utilizes the single-dwell search with the bit reversal. Simulation results in IEEE 802. I5 Task Group .3a UWB indoor wireless channel show that the proposed scheme for the LHWB signals can achieve significant reduction of the required mean acquisition time as compared to the conventional single-dwell bit reversal search and double-dwell bit reversal search with more complex structure employing two correlators for various threshold levels. In addition, it is also observed that the proposed scheme can achieve much faster and reliable signal acquisition in noisy environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1623-1632
• /
• 2004

In this paper, we analyze the performance of linear search and bit reversal search algorithms based on the single-dwell serial search for rapid UWB (Ultra Wide Band) signal acquisition in typical indoor wireless channel environments. Simulation results according to bin spacing and frame interval in IEEE 802.15 Task Group 3a UWB indoor wireless channels show that bit reversal search algorithm achieves much smaller normalized mean acquisition time than linear search algorithm. In particular, it is found that the normalized mean acquisition time of the bit reversal search according to the range of searching termination interval closely matches the ideal case. In addition, we observe that the acquisition performance of bit reversal search algorithm becomes much better as bin spacing gets finer.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.66-73
• /
• 2015

IFFT is one of the key components in OFDM-based communication systems. In this paper, we propose a new memory efficient IFFT design method for OFDM-based communication systems, based on a mapping of three IFFT input signals which consist of modulated data, pilot and null signals. The proposed method focuses on reducing the memory size in the bit-reversal block which requires the largest number of memory cells in IFFT architectures. To reduce the memory size, we propose a selection mapping method based on decimation-in-time (DIT) algorithm. It is shown that the proposed method achieves a memory reduction of about 50% compared to conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1133-1143
• /
• 2005

In this paper, we propose an enhanced two-step search scheme for rapid and reliable signal acquisition in UWB systems under multipath channels. The proposed TSS-LS (Two-Step Search scheme with the Linear search based Second step) achieves rapid acquisition performance comparable to the conventional TSS-BS (Two-Step Search scheme with the Bit reversal search based Second step) already proposed by the authors, based on the single-dwell search with two-step thresholds and search windows. However, unlike the TSS-BS which employs the bit reversal search in the second step, the proposed TSS-LS utilizes the linear search in the second step to improve the reliability of signal acquisition. Simulation results with multipath channel models by IEEE 802.15.3a show that the two-step search schemes for the UWB signal acquisition can achieve sig nificant reduction of the required mean acquisition time as compared to general search schemes. In addition, we observe that the proposed TSS-LS achieves quite good bit error rate performance for large signal-to-noise ratios, which is favorably comparable to the case of ideal perfect timing.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.392-399
• /
• 2014

The underwater acoustic communication is characterized by doubly spread channels, which are the delay spread due to multiple paths and the doppler spread due to environmental fluctuations or a moving platform. An equalizer is used to remove the inter-symbol interferences that the delay spread causes, but an equalizer doesn't use an acoustic environment such as a multipath. However, a passive time-reversal mirror is simpler than an equalizer because a matched filter is implemented numerically at the receiver structure along with one-way propagation. In this paper, a passive time-reversal mirror is applied to remove interferences due to a multipath in sea-going experimental data in East Sea in Oct. 2010 and improved communication performance is confirmed. The performance is verified by comparing the signal-to-interference plus noise ratio before/after passive time-reversal mirror. It is also performed independently of the passive time-reversal mirror and adaptive equalizer and the bit error rate is compared to verify the performance of underwater acoustic communication.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.375-375
• /
• 2004

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.5
• /
• pp.33-39
• /
• 2011

We studied the performance of a two-user time reversal multiple input single output scheme combined with the shifted transmission technique in a variable rate back-off scenario, called shifted time reversal (TR), that minimizes both intersymbol interference and multiuser interference. We compare the bit error rate performance of the shifted TR scheme to both full-rate TR and full back-off TR schemes and demonstrate its superiority to shifted zero forcing scheme when the guard interval is larger than one.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.52-57
• /
• 2012

We propose a weighted time-reversal prefilter for indoor wireless communication systems. In the indoor wireless communication environments, the bit error rate (BER) performance is significantly degraded by the delay spread. The conventional schemes have complex receivers to recover deterioration of the BER. The proposed time-reversal prefilter simplifies the structure of receivers, minimizes the inter-symbol interference (ISI) and maintains the peak power level of the received signal. The simulation results show that the weighted time-reversal prefilter improves the BER performance in comparison with the conventional time-reversal prefilter.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.90.2-90.2
• /
• 2008

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.2
• /
• pp.45-53
• /
• 1995

In mobile communication, the performance of QAM technique is poor under deep fading even though Rayleigh channel characteristics are estimated and compensated. In this paper, we analyze the performance of 3/4 Trellis coded 16QAM in Rayleigh channel where burst errors are randomized by bit reversal block interleaver, and TCM coder is designed by computer search to be adequate for Rayleigh channel. The simulation results show that the interleaver has 2dB gain, the modified Viterbi decoder has 2.5dB, and diversity has 9dB gain at $P_{b}b/=10^{-3}$. This indicates that the 3/4 TC 16QAM is applicable to digital mobile communication with good performance.