• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.295-302
• /
• 2014

OFDM technique uses multiple sub-carriers for the data transmission. Therefore, inter carrier interference is generated because of nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over Doppler fading channels also causes inter carrier interference. The interference increases the bit error rate in receiver. Sub-carrier allocation methods in LTE and WiMAX standards are different. The performance of OFDM systems using different sub-carrier allocation, gauged by the bit error rate, is analyzed considering the nonlinear high power amplifier, carrier frequency offset and Doppler fading channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.2
• /
• pp.76-81
• /
• 1983

PCM-NRZ/FM Telemetry system is constructed on the basis of RF link with FM modulatedand NRZ-L binary coded PCM data are assumed to transmit through 5th-order Bessel filter. Upon demodulated by the limiter-discriminator at the receiver, the probability of bit error, which is important for performance estimation of digital system, is analyzed against SNR. The analysis based on the following parameters, that is bit rate 140kHz, frequency of pre-modulation filter f-100kHz, maximum frequency deviation of transmitter 2f=300kHz, was performed. As a result, when the telemetry system with the parameters above is designed, the probability of bit error is obtained as 10 along with fT=0.7 and h=2, T=2.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.408-414
• /
• 2007

Research advances in the areas of micro-sensor device and wireless network technology, has made it possible to develop energy efficient and low cost wireless sensor nodes. In this paper, the forward error control (FEC) scheme for lower power consumption and excellent BER(Bit Error Rate) performance during transmission propose in multi-hop wireless sensor network based on FSK modem. The FEC technique uses extra processing power related to encoding and decoding, it is need complex functions to be built into the sensor node. The probability of receiving a correct bit and codeword for relaying a frame over h nodes to the sink node is calculated as a function of channel parameter, number of hops, number of bits transmitted and the distance between the different nodes.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.491-501
• /
• 1990

Recently, four speech coding techniques, namely, SBC-APCM(sub-band coding adaptive PCM), RPE-LPC(regualr pulse excitation linear predictive codec), MPE-LTP(multi-pulse excited long-term prediction) and CELP (code-excited linear prediction) are proposed for digital mobile radio applications. However, a performance comparison of these coders in the Rayleigh fading environment has not been made yet. In this paper, the performances of the four spech coders in the random bit error and burst error environment are investigated. For the channel coding of SBC-APCM, RPE-LPC and MPE-LTP, the sensitivity of output bit stream is measured and a bit selective forward error correction is provided acording to the measured bit sensitivity. And for an attempt to improve the performance of CELP, an optimum quantizer is applied for transmitting scalar quantities in CELP. However, an improvement over the conventional approach is found to be negligible. For the channel coding of CELP, Reed-Solomon code, Golay code, convolutional code of rate 1/2 shows the best performance. Finally, from the simulation results, it is concluded that CELP is the best candidate for digital mobile radio and is followed by MPE-LTP, SBC-APCM and RPE-LPC.

• ETRI Journal
• /
• v.27 no.1
• /
• pp.53-63
• /
• 2005

A compressed video bitstream is sensitive to errors that may severely degrade the reconstructed images even when the bit error rate is small. One approach to combat the impact of such errors is the use of error concealment at the decoder without increasing the bit rate or changing the encoder. For spatial-error concealment, we propose a method featuring edge continuity and texture preservation as well as low computation to reconstruct more visually acceptable images. Aiming at temporal error concealment, we propose a two-step algorithm based on block matching principles in which the assumption of smooth and uniform motion for some adjacent blocks is adopted. As simulation results show, the proposed spatial and temporal methods provide better reconstruction quality for damaged images than other methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.771-774
• /
• 2010

In this paper, BER performance of LDPC(Low-Density Parity-Check) decoder for WiMAX is analyzed, and optimal design conditions of LDPC decoder are derived. The min-sum LDPC decoding algorithm which is based on an approximation of LLR sum-product algorithm is modeled and simulated by Matlab, and it is analyzed that the effects of LLR approximation bit-width and maximum iteration cycles on the bit error rate(BER) performance of LDCP decoder. The parity check matrix for IEEE 802.16e standard which has block length of 2304 and code rate of 1/2 is used, and AWGN channel with QPSK modulation is assumed. The simulation results show that optimal BER performance is achieved for 7 iteration cycles and LLR bit-width of (8,6).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.11
• /
• pp.9-14
• /
• 2008

This paper presents the performance analysis of 10[Gb/s] optical duobinary transmitters with the non-ideal Mach-Zehnder modulator which does not have exactly 50/50 splitting/combining ratios by computer simulations. For driving voltage ratios(=driving voltage/switching voltage) with smaller than 100[%], the transmission performance has been greatly affected by extension of LPF bandwidths. Nevertheless, the performance has been degraded when the driving voltage ratio is 100[%]. The smaller driving voltage ratios has, the more sensitivity improves by extension of LPF bandwidths under the asymmetry condition. But the driving voltage ratio with 80[%] has better bit error rate(BER) than those with 50[%] and 25[%].

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.451-463
• /
• 2016

The misalignment errors and fluctuations in irradiance due to atmospheric turbulence can severely degrade the performance of free-space optical (FSO) systems. In this paper, we investigate the asymptotic bit error rate (BER) performance and diversity orders of FSO links using parallel transmit-diversity schemes. The BER expressions of FSO links with the switch-and-examine transmit (SET), switch-and-examine transmit with post-selection (SETps), dual-branch transmit laser selection (Dual-TLS), and group transmit laser selection (Group-TLS) schemes are derived, based on an approximate channel model. Then numerical simulations for these four schemes in the region of high average signal-to-noise ratio (SNR) are presented under different channel conditions. The results show that the four transmit-diversity schemes can reduce system complexity and overcome the limitation of peak power, without much BER deterioration.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.20-28
• /
• 2012

DVC(Distributed Video Coding) technique is a new paradigm, which is based on the Slepian-Wolf and Wyner-Ziv theorems. DVC offers not only flexible partitioning of the complexity between the encoder and decoder, but also robustness to channel errors due to intrinsic joint source-channel coding. Many conventional research works have been focused on the light video encoder and its rate-distortion performance improvement. However, in this paper, we propose a new DVC codec which is effectively applicable for error-prone environment. The proposed method adopts a quantiser without dead-zone and symmetric Gray code around zero value. Through computer simulations, the proposed method is evaluated by the bit errors position as well as the number of burst bit errors. Additionally, it is shown that the maximum and minimum transmission rate for the given application can be linearly determined by the number of bit errors.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.9
• /
• pp.6-13
• /
• 1993

In is well-known that system performance in the high speed digital radio communication system is usually deteriorted due to the frequency selective fading distortion. In this paper, bit error rate(BER) performance by the reception phase error in cellular mobile communication systems is derived and analyzed. The system is modeled as a frequency selective fast Rayleigh fading channel corrupted by additive white gaussian noise(AWGN) and co-channel interference(CCI). Our numerical results show that for the 24KBaud(48Kb/s) $\pi$/4-DQPSK operated at carrier frequency 800 MHz and C/I<20 dB, the BER will be dominated by CCI if the vehicular speed is below 100 Km/h. The results show that performance, when reception phase error is below $\pi$/12, is deterioreted less than 3 dB, and that performance, when reception phase error is above $\pi$/12, is degraded over 3 dB.