• 전자공학회논문지B
• /
• 제31B권4호
• /
• pp.97-105
• /
• 1994

Transform image coding using DCT is proved to be efficient in the absence of channel error but its performance degrades rapidly over noisy channel. In this paper, in the case of appling bit selcetive error correction coding that protects some significant bits in a codeword, an efficient allocation method of imformation bits and additive redundancy bits used for quantization and error correction coding respectively under constant transmission bit rate is proposed, and its performance is analyzed. As a result, without increasing trasmission bit rate, PSNR can be improved up to 7~8 [dB] below bit error rate $10^2$ and the image without blocking effect caused by bit error resulted from channel noise can be recostructed.

• 한국음향학회지
• /
• 제12권1호
• /
• pp.47-54
• /
• 1993

Performance analysis is very important to transmit the high quality information and to construct the optimal system for the minimze the noise from the channel of spread spectrum system. In this paper the error rate performance is analyzed with computer simulation in noncoherent frequency hopping M-qry frequency shift keying(FH/MFSk) systems with regard to thermal noise under the partial band jamming environments. AS a result, in case the thermal noise is disregarded, bit error probability of system in jamming fraction ρ and Eb/Nj(bit energy to jamming power density) is reduced with the increase of K and in worst case 32FSK system is better than 2FSK system by 3.23dB with the variatio of Eb/Nj. In case thermal noise is considered, bit error probability of system by 3.23dB with the variation of Eb/Nj. In case thermal noise is considered, bit error probability of system are reduced with the increase of K and Eb/No(bit energy to thermal noise density). Bit error probability in connection with worst case ρ is not largely influenced form over the 14dB to K=1 and 8dB to K=5 accordingly thermal noise disregarding. These results may be useful for avoiding the common vulnerabilities when the spread spectrum system is designed.

• 한국음향학회지
• /
• 제40권4호
• /
• pp.359-369
• /
• 2021

수중통신에서 빠른 채널 특성의 변화에 따른 성능 감소를 보상하기 위해, 동일한 데이터를 여러 개의 주파수 대역으로 전송하는 다중 밴드 기법을 적용한다. 그러나 다중 밴드의 적용 시 특정한 밴드의 성능 열화로 전체 성능이 감소하는 현상이 발생한다. 이를 극복하기 위해 각 밴드의 오류율을 분석하여 성능이 열악한 밴드에 낮은 가중치를 할당할 수 있다. 따라서 본 논문에서는 추정 Bit Error Rate(BER)을 이용한 가중치 설정 방법을 제안한다. 추정 BER을 이용한 가중치 설정 방식은 복호 된 데이터와 복조 후 데이터의 성능 차이를 이용하여 수신된 데이터의 신뢰도를 측정하며, 측정된 값을 이용하여 각 밴드별 가중치를 설정해 복호기로 입력하면 성능이 향상된다. 본 논문에서는 터보 부호화 기법을 적용하였으며 시뮬레이션을 이용하여 최적의 가중치 값을 설정해 해상 실험을 한 결과 추정 BER을 이용한 가중치 설정을 통해 오류를 모두 정정할 수 있었다.

• Journal of Communications and Networks
• /
• 제15권1호
• /
• pp.25-30
• /
• 2013

Uplink multicarrier code-division multiple-access (MC-CDMA) with equal gain combining (EGC) over Nakagami fading channels is considered. An improved expression which is a feasible alternative for the bit error rate (BER) performance evaluation of MC-CDMA signals is proposed. Simulated annealing algorithm is employed to obtain the optimum value of the coefficients belonging to the proposed expression. Numerical examples show that the performance curves computed by the improved expression are in good agreement with the results obtained by the exact expression. Thus, the proposed expression can improve the accuracy of BER performance evaluation that has been realized by the approximate expression.

• ETRI Journal
• /
• 제41권2호
• /
• pp.184-196
• /
• 2019

Wavelet packet modulation (WPM) is a multicarrier modulation (MCM) technique that has emerged as a potential alternative to the widely used orthogonal frequency-division multiplexing (OFDM) method. Because WPM has overlapped symbols, equalization cannot rely on the use of the cyclic prefix (CP), which is used in OFDM. This study applies linear minimum mean-square error (MMSE) equalization in the time domain instead of in the frequency domain to achieve low computational complexity. With a modest equalizer filter length, the imperfection of MMSE equalization results in subcarrier attenuation and noise amplification, which are considered in the development of a bit-loading algorithm. Analytical expressions for the bit error rate (BER) performance are derived and validated using simulation results. A performance evaluation is carried out in different test scenarios as per Recommendation ITU-R M.1225. Numerical results show that WPM with equalization-aware bit loading outperforms OFDM with bit loading. Because previous comparisons between WPM and OFDM did not include bit loading, the results obtained provide additional evidence of the benefits of WPM over OFDM.

• 대한전자공학회논문지
• /
• 제27권4호
• /
• pp.484-490
• /
• 1990

In speech coding scheme, because information bits have different error sensitivities over channel errors, the channel coder for combining with speech coding should be realized by the variable coding rate considering the bit importance of speech information bits. In realizing the 4 kbps channel coder for 12kbps speech, this paper have chosen the channel coding method by analyzing the hard-decision post-decoding error rate of RCPC(Rate Compatible Punctured Convolutional) codes and bit error sensitivity of 12 kbps speech. Under the coherent QPSK and Rayleigh fading channel, the performance analysis has showed that 10dB gain was obtained in speech SEGSNR by 4-level uneuqal error protection, which was compared with the caseof no channel coding at 7dB channel SNR.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.165-168
• /
• 2000

The bit error rate(BER)of the data passed through Wideband-Code Division Multiple Access (W-CDMA) system with turbo-codes structure is presented. The performance of turbo-codes under W-CDMA system is estimated for various users and iteration numbers of decoding. The channel model is Additive White Gaussian Noise(AWGN) and Rayleigh fading channel. When iteration number increases, bit error probability of turbo-codes decreases. and when the number of users increase, bit error probability of turbo-codes increases.

• 전자공학회논문지
• /
• 제50권8호
• /
• pp.21-27
• /
• 2013

본 논문에서는 Turbo coded BICM-ID (bit-interleaved coded modulation with iterative decoding)의 구현 복잡도를 개선하기 위한 기법을 제안한다. 터보 부호는 Shannon 한계에 근접하는 우수한 성능을 나타내는 오류정정부호 (error correction code)이며 터보 부호와 고차원 변조 (high order modulation)를 결합하여 전송효율을 개선할 수 있다. BICM (bit-interleaved coded modulation)은 채널 부호와 고차원 변조 사이에 이진 인터리버를 사용하는 기법이며 복호기와 복조기 간에 정보를 주고받으며 반복 복호 (iterative decoding)를 수행하는 BICM-ID를 이용하여 성능을 개선 할 수 있다. BICM-ID는 BICM과 비교하였을 때 반복 복호로 인하여 비트오율 (bit error rate) 성능이 개선되지만 구현 복잡도가 크게 증가하는 단점이 있다. 본 논문에서는 Turbo coded BICM-ID에서 구현 복잡도를 개선하기 위한 기법을 제안한다. 제안하는 기법은 기존에 제안된 Turbo coded BICM-ID 기법과 유사한 비트오율 (bit error rate) 성능을 나타내면서 구현 복잡도를 크게 감소시킬 수 있는 장점이 있다.

• Journal of Communications and Networks
• /
• 제16권3호
• /
• pp.301-304
• /
• 2014

This paper proposes accurate interference probability and bit error rate formulas for cognitive relay networks with underlay spectrum sharing and channel estimation error (CEE). Numerous results reveal that the CEE not only degrades the performance of secondary systems (SSs) but also increases interference power caused by SSs to primary systems (PSs), eventually unfavorable to both systems. A solution to further protect PSs from this effect through reducing the power of secondary transmitters is investigated and analyzed.

• Journal of the Optical Society of Korea
• /
• 제14권1호
• /
• pp.22-27
• /
• 2010

Bit error rate (BER) monitoring is the ultimate goal of performance monitoring in all digital transmission systems as well as optical fiber transmission systems. To achieve this goal, optimization of the decision threshold must also be considered because BER is dependent on the level of decision threshold. In this paper, we analyze a pseudo-error counting scheme and propose an algorithm to achieve both BER monitoring and adaptive decision threshold optimization in optical fiber transmission systems. To verify the effectiveness of the proposed algorithm, we conduct computer simulations in both Gaussian and non-Gaussian distribution cases. According to the simulation results, BER and the optimum decision threshold can be estimated with the errors of < 20% and < 10 mV, respectively, within 0.1-s processing time in > 40-Gb/s transmission systems.