• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.259-266
• /
• 2020

In this study, required drill bits and excavation methods were developed for an uneven drilling method that can solve the problem of performance degradation of rock bolts. The developed drill bit's excavation performance was verified using rock with a strength of 100 MPa or more. In addition, for the relative evaluation of the uneven excavation method, experimental specimens were prepared for models with and without irregularities, and tests were performed. As a result of the experiment, the model with unevenness exhibited an average critical draw resistance of 801.6 kN, which is about 1.7 times the value of 468.7 kN for the model without unevenness, thus confirming the effect sufficiently. Therefore, it is expected that the resistance performance will significantly increase despite an increase in the uneven hole diameter of 20 mm. In the future, the results of this study could be used as basic data when performing other studies using numerical analysis models and performance verification through experiments to obtain an optimized rock forming method.

• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.109-114
• /
• 2015

Purpose - The movie market has the characteristics of being a perfectly competitive market as well as a pure monopolistic market at the same time. This is because there are competitors in the industry but prices, although not fixed, have not changed a lot. Price competition may not have spread, but the competition is focused on artistic value, and the degree of box office success is most important. The artistic value is determined in the course of the production process. However, the degree of box office success is dependent upon the marketing manager. The marketing strategy represents the difference in the standard or quality of the movie. Inherently, the marketing manager adopts the entertainment strategy based on the quality of the foundation of the completed movie. At this time, the marketing manager knows the pertinent information (high quality/low quality) regarding the movie. This research study tries to reveal what should be the reasonable movie marketing expense, dependent on the quality of the movie. Research design, data, and methodology - Using a game scenario with different market players, the goal of the research analysis is to find out the following. First, the marketing expense is determined to maximize the profits after film production. Second, after the production costs are already committed, the manufacturer gets to choose the marketing level. At this time, there will be a profit maximization point, considering the competition. The premise of the research is as follows: if it is a good movie of quality, positive word of mouth increasing the audience continuously slows down the speed of the demand curve. If the movie quality is bad, the negative word of mouth decreasing the audience gradually hastens the speed of the demand curve. On the marketing side, when the manufacturer invests heavily in the marketing expense of the movie, consumer expectations increase to drive up the audience numbers. On the other hand, it is difficult to improve the profits excessively. When the manufacturer invests in marketing a little bit, the marketing expense is only relatively committed, therefore a lot of demand cannot be gained. Results - If a fixed market share is in a competitive situation, a low quality manufacturer expends relatively more marketing expense. If the situation assumes two manufacturers spend the same for the cost of production, the high quality manufacturer takes more profit. If the manufacturer expends less marketing budget to save costs, the optimum profit cannot be achieved since the other party (opponent) grabs the initial market share. Conclusions - In conclusion, investment is essential for market share to increase. We must refrain from a zero-sum game and have models where the game participants pursue the creative profits together. In the current film industry, there is the dominating logic of winner and loser but we have to create a film industry environment where the participants can be altogether satisfied and live together.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.35-45
• /
• 2010

The soil tests have been performed on the specimens obtained from about 1,150 sites including landslides and non-landslides areas in natural terrains for last 10 years. Based on the results of those tests, the average soil properties are estimated and the simple equations for estimating permeability are proposed according to geologic conditions. The average permeability in Granite and Mudstone sites is higher than other sites and the content of silt and clay in Mudstone and Gneiss sites is higher than other sites. The correlation analysis and the regression analysis were performed to estimate the coefficient of permeability according to geological conditions. As the result of the correlation analysis, the coefficient of permeability is selected as a dependent variable, and the silt and clay contents, the water contents and the dry unit weights are selected as independent variables. As the result of the regression analysis, the silt and clay contents and the void ratio were involved commonly in the linear regression equations according to geological conditions. To verify the proposed the linear regression equations, the measured result of the coefficient of permeability at other sites was compared with the result predicted with the proposed equations. As the result of comparison, there were a little bit different between them for some data. However the difference was relatively small. Therefore, the linear regression equations for estimating the coefficient of permeability according to geological conditions may be applied to Korean soils. However, these equations should be verified and corrected continuously to improve the accuracy.

• Journal of Internet Computing and Services
• /
• v.10 no.5
• /
• pp.79-93
• /
• 2009

For developing the location based service which is individualized and specialized according to the characteristic of the users, the spatio-temporal pattern mining for extracting the meaningful and useful patterns among the various patterns of the mobile object on the spatio-temporal area is needed. Thus, in this paper, as the practical application toward the development of the location based service in which it is able to apply to the real life through the pattern mining from the huge historical data of mobile object, we are proposed STOMP(using Frequency of sequence and Weight) that is the new mining method for extracting the patterns with spatial and temporal constraint based on the problems of mining the optimal moving pattern which are defined in STOMP(F)[25]. Proposed method is the pattern mining method compositively using weighted value(weights) (a distance, the time, a cost, and etc) for our previous research(STOMP(F)[25]) that it uses only the pattern frequent occurrence. As to, it is the method determining the moving pattern in which the pattern frequent occurrence is above special threshold and the weight is most a little bit required among moving patterns of the object as the optimal path. And also, it can search the optimal path more accurate and faster than existing methods($A^*$, Dijkstra algorithm) or with only using pattern frequent occurrence due to less accesses to nodes by using the heuristic moving history.

• Journal of Korea Spatial Information System Society
• /
• v.7 no.2 s.14
• /
• pp.29-38
• /
• 2005

Even though underground conduits have became important city-infra structures which should be exhaustively and efficiently managed, there is few systems which supports the well-defined facility management standards. Due to the lack of the supporting systems, experts must visit underground conduits scattered several cities over the country to see and check the status of the underground conduits including built-in facilities. This type of management gives us a little bit delayed status information at the end of so much time and money costs. In this paper, to solve this problem and manage the conduit synthetically, we developed a web-based facility management system for underground conduits by using information technologies. The developed management system has a simplified map drawing interface to depict the overall architectures and locations of underground conduits and their built-in facilities into sketch maps. And, the system uses the 3D panorama image technology with zooming functions in addition to still images and video images to give the feeling of a spot inspection. Moreover, since the system accumulates the data of repair/reinforcement, occasional inspections and safety diagnosis, conduit managers can synthetically and effectively manage the facilities within underground conduits and themselves.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.497-508
• /
• 2017

This study was carried out to document and diagnose the conditions of the seated stone statue of Buddhist Master Seungga in Seunggasa temple immediately after its conservation treatment, which was found to be long covered in surface of white materials. The stone Halo was researched along with the Statue, and basic data was secured through precisely examination and nondestructive diagnosis. The result from the surface deterioration evaluation shows that both the Statue and Halo had a little bit of physical deterioration, although their level of chemical deterioration was proportionally higher due to discoloration. The physical property diagnosis using ultrasonic measurements on the Statue and Halo showed that the average ultrasonic velocity was found to be 3,570 m/s and 3,373 m/s, respectively, which corresponds to grade III, an indication of a favorable physical property. The surface covered materials were detected to be Ca, Ti, Pb, Fe, Al and Si, emanating from Hobun (Oster shell powder; $CaCO_3$) or lime ($CaO{\cdot}Ca(OH)_2$) and silicate minerals. Furthermore, Ti and Pb seems to be the component of the white coloring pigments, titanium white ($TiO_2$) and white lead ($2PbCO_2{\cdot}Pb(OH)_2$). Therefore, the seated stone statue of Buddhist Master Seungga is presumed to be painted with Hobun or lime and thereafter painted over with titanium white and white lead.

• Korean Journal of Occupational Health Nursing
• /
• v.8 no.1
• /
• pp.5-21
• /
• 1999

The purpose of this study is to evaluate the physical fitness status and health promoting life styles of the workers. For the purpose, 108 workers who attended the exercise program in Inchon branch of KISCO were selected as the subjects. From Oct. 20th to Nov. 30th, in 1998, they were firstly assessed their physical fitness. The items include cardio-respiratory endurance, flexibility, muscular strength, muscular endurance, agility, power, balance, body composition, etc. Secondly, the health promoting life styles were asked by questionnaires about daily life and dietary habits. Both of them were evaluated by 5 or 3 levels as A(very good) to E(very poor) or A (good) to C(poor). Those data were analyzed percentile, mean, standard deviation by SAS program. Major findings are as follows ; 1. The health promoting life styles were generally good, but 43.5% of the subjects didn't exercise at all. Most of them(93.5%) thought about their physical fitness status as lower than average level. About half of them(48.1%) didn't drink alcohol, non smokers were 70.4% of them. But they had poor dietary habits(lower than average level : 79.6%), females were a little bit better than males. The aged group had the poor body compositions, 21.4% of females and 10.0% of males were obese. 2. Physical fitness status of the workers were assessed as two areas, one is health related, the other is physical function related area. In the health related area, females were better than males, in view of age, forties aged group had the highest scores of all items except cardio-respiratory endurance. Among 'A' and 'B' level, muscular endurance was showed most frequently, followed by muscular strength, flexibility, cardiorespiratory endurance. In physical function related status, balance was ranked highly in the portion of over 'B', followed by power, agility. In view of sex, males were better than females for all items except balance, and there were various figures in the status by age groups. 3. Comprehensive assessment scores were poor(under 'D' leves were most frequent), females were better than males, and teenage group had the worst scores. In ages of the physical fitness, generally they had 1 year under their real ages, and females were better than males. In view of age, forties aged group was ranked highly and teenagers had lowest scores.

• Korea journal of population studies
• /
• v.34 no.1
• /
• pp.129-157
• /
• 2011

This study attempts to analyze the effect of level of education on the attitudes toward immigrants or foreign workers. More specifically, we examine whether there is significant difference in the effects of the level of education and global mind on the attitude among three East Asian countries (South Korea, Japan, and Taiwan), controlling other socio-demographic factors in relation to increase in immigrants and foreign workers. Using EASS data, we employs sequential logit model to the general attitudes toward immigrant workers into the weighted sum of transition probability within each educational level. One major finding is that there is clear and significant difference in the relationship between the level of education and the attitudes toward foreign workers among three countries. In general, while Japanese and Taiwanese tend to have more open-minded attitudes toward foreign workers as they have higher level of education, Koreans are opposite case that they are little bit more hostile toward to foreign workers with higher level of education. Especially, there is strong positive effect of education on the attitude in Taiwanese case. Another finding is that while there is strong resistance against increase in migrant population in Korea and Taiwan, Japanese respondents want current level of foreign population to remain in the similar level. Our findings imply that there is no one converging pattern of relationship between the level of education and the positive attitudes toward foreign workers which can be applied to any country. Therefore, this paper suggests that unique political, social, and cultural characteristics of each country should be considered to better understand the effect of education on the attitude toward immigrants and foreign workers. Also, we conclude that systematic comparative-demographic analyses should be utilized to provide more comprehensive picture of how difference in educational level affects the attitude toward immigrants and foreign workers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.6
• /
• pp.662-671
• /
• 1992

The purpose of this study was to develop a software system for menu planning program in an institutional food service. In this research, a Qnix-7700/AT(16 bit personal computer) compatible with IBM-PC/AT was used and all the files and programs were created by using COBOL. This study provides food service managers with more effective management system by personal computerized menu planning program. Software programs developed in this study were summerized as follows : (1) Programs for outputing standard amounts of the basic food groups. (2) Programs for inputing the cooking type code, the food code and the food amount of the menu. (3) Programs for outputing distribution of the basic food groups of the computerized menu. (4) Programs for calculating the price of each food and menu. (5) Programs for calculating the nutrient content of each food and menu. (6) Programs for outputing the purchasing amount of food. (7) Programs for outputing the menu table. (8) Programs for inputing and modifing the food composition in the food composition file. (9) Programs for inputing and modifing the cooking types in the cooking types file. (10) Programs for inputing and modifing the food prices in the food prices file.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.58-63
• /
• 2013

This paper presents a transceiver design for DisplayPort interface using an optical channel. By converting the electronic channel to the optical channel, the DisplayPort's main channel can provide a high-speed data transmission for long distance. The design converting the electronic channel to the optical channel in the main channel and AUX channel of the DisplayPort is presented in this paper. Futhermore, the HPD signal transmission by using AUX channel is proposed. In order to minimize power consumption, this paper also proposed a method of controlling the TX block in the main link. The proposed system is designed by a FPGA and an optical module. The FPGA used 651 ALUT(adaptive look-up table)s, 511 resisters and 324 block memory bits. The maximum operating rate of the FPGA is 250MHz. With the proposed power control scheme, 740mW of power dissipation reduction can be achieved at the main link optical TX module.