• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.879-888
• /
• 2004

In this paper, we propose a real time QoS(Quality of Service) guaranteed transmission mechanism for MPEG video traffic at the congested node in IP based networks. Recent spread of the Internet has increased the demands of a real time multimedia service of the quality, Because the type of Internet services can, however, offer the best effort delivery strategies, it is difficult to treat all the types of traffic with differential COS (Class of Service). Most of all, the hierarchical coding method of MPEG data utilizes the reference frame for the motion prediction. The loss of the reference frames makes QoS of the video traffic degraded because the reference frame bit error causes the consecutive packet loss. Therefore we have studied the real time QoS guaranteed mechanism for video traffic by analyzing the previous methods. Computer simulation results show that the proposed scheme has better performance than the previous one.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.11
• /
• pp.2954-2972
• /
• 1998

It is expected that the transport of compressed video will become a significant part of total network traffic because of the widespread introduction of multimedial services such as VOD(video on demand). Accordingly, VBR(variable bit-rate) encoded video will be widely used, due to its advantages in statistical multiplexing gain and consistent vido quality. Since the transport of video traffic requires larger bandwidth than that of voice and data, the characterization of video source and traffic modeling is very important for the design of proper resource allocation scheme in ATM networks. Suitable statistical source models are also required to analyze performance metrics such as packet loss, delay and jitter. In this paper, we analyzed and described on the characterization and traffic modeling of MPEG video sources. The models are broadly classified into two categories; i.e., statistical models and deterministic models. In statistical models, the models are categorized into five groups: AR(autoregressive), Markov, composite Marko and AR, TES, and selfsimilar models. In deterministic models, the models are categorized into $({\sigma},\;{\rho}$, parameterized model, D-BIND, and Empirical Envelopes models. Each model was analyzed for its characteristics along with corresponding advantages and shortcomings, and we made comparisons on the complexity of each model.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.8
• /
• pp.81-90
• /
• 2012

For digital TV, the recommendation of u-health personalized service of semantic environment should be done after evaluating individual physical condition, illness and health condition. The existing recommendation method of u-health personalized service of semantic environment had low user satisfaction because its recommendation was dependent on ontology for analyzing significance. We propose the personalized service recommendation method based on Naive Bayesian Classifier for u-health service of semantic environment in digital TV. In accordance with the proposed method, the condition data is inferred by using ontology, and the transaction is saved. By applying naive bayesian classifier that uses preference information, the service is provided after inferring based on user preference information and transaction formed from ontology. The service inferred based on naive bayesian classifier shows higher precision and recall ratio of the contents recommendation rather than the existing method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.8
• /
• pp.10-15
• /
• 2012

This letter proposes a low-leakage SRAM using power-gating and voltage-level control. The power-gating scheme significantly reduces leakage power by shutting off the power supply to blank memory cell blocks. The voltage-level control scheme saves leakage power by raising the ground line voltage of SRAM cells and word line decoders in data-stored memory cell blocks. A $4K{\times}8bit$ SRAM chip was fabricated using a 1.2V $0.13{\mu}m$ CMOS process. The leakage powers are $1.23{\sim}9.87{\mu}W$ and $1.23{\sim}3.01{\mu}W$ for 0~100% memory usage in active and sleep modes, respectively. During the sleep mode, the proposed SRAM consumes 12.5~30.5% leakage power compared to the conventional SRAM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.139-150
• /
• 2014

This paper suggests an algorithm to improve QoS by using DTR bit employed in the MIL-STD-188-220 protocol, when there is a multi-path between source and destination in the environment of KVMF tactical network supporting NCW. The MIL-STD-188-220 protocol can evaluate the link quality relatively but it cannot support optimal path selection for QoS. In order to solve this problem, we design an algorithm for selecting path using topology table which reflects measured DTR of path after the completion of transmission. The performance of the proposed algorithm has been evaluated by OPNET simulator. As a result of the simulation, it is found that QoS of proposed algorithm is enhanced higher than that of the MIL-STD-188-220 in the aggravated communication environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.526-531
• /
• 2014

Vehicular communications have been receiving much attention in intelligent transport systems(ITS) by combining communication technology with automobile industries. In general, vehicular communication can be used for vehicle-to-vehicle(V2V) and vehicle-to-infrastructure( V2I) communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environment(WAVE). WAVE system transmits signal in 5.835~5.925 GHz frequency band with orthogonal frequency division multiplexing(OFDM) signaling. In this paper, after 32 bit processed the channel monitoring in MAC(Media Access Control) layer of WAVE system implemented according to IEEE 802.11p standard, data were received and we evaluated the performance, we built the test bed consisting of OBU(On Board Unit) in the real expressway. We transmitted WSM(WAVE Short Message) and received WSM between OBU wirelessly. And then, we calculated channel occupancy time per one frame and throughput, and evaluated the performance.

• Journal of Digital Contents Society
• /
• v.12 no.4
• /
• pp.485-490
• /
• 2011

Smoothing is a transmission plan where variable rate video data is converted to a constant bit rate stream. These smoothing algorithms include CBA, MCBA, MVBA, PCRTT and others. But, these algorithms build a transmission plan per frame unit. So, these algorithms cause frame burst or GOP burst. In order to improve it, MVBAG algorithm build a transmission plan per GOP. But this algorithm may not guarantee QoS when frame's size is abruptly larger or smaller than the computed transmission rate. In this paper, a smoothing algorithm is proposed to enhance MVBAG algorithm's problem. In order to show the proposed algorithm's performance, the proposed algorithm is compared with MVBAG algorithm using various evaluation factors such as number of frames that do not meet the QoS, average transmission rate variability per frame, average transmission rate variability per GOP. Experimental results show that the proposed algorithm outperforms MVBAG algorithm in number of frames that do not meet the QoS.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.39-48
• /
• 2004

Turbo codes, whose performance in bit error rate is close to the Shannon limit, have been adopted as a part of standard for the third-generation high-speed wireless data services. Iterative Turbo decoding results in decoding delay and high power consumption. As wireless communication systems can only use limited power supply, low power design techniques are essential for mobile device implementation. This paper proposes new effective criteria for stopping the iteration process in turbo decoding to reduce power consumption. By setting two stopping criteria, decodable threshold and undecodable threshold, we can effectively reduce the number of decoding iterations with only negligible error-correcting performance degradation. Simulation results show that the number of unsuccessful error-correction can be reduced by 89% and the number of decoding iterations can be reduced by 29% on the average among 12500 simulations when compared with those of an existing typical method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.41-52
• /
• 2009

In Motion JPEG2000 encoding, huge bandwidth requirement of data memory access is the bottleneck in required system performance. For the alleviation of this bandwidth requirement, a new embedded compression(EC) algorithm with a little bit of image quality drop is devised. For both random accessibility and low latency, very simple and efficient entropy coding algorithm is proposed. We achieved significant memory bandwidth reductions (about 53${\sim}$81%) and reduced code-block memory to about half size through proposed multi-mode algorithms, without requiring any modification in JPEG2000 standard algorithm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.116-124
• /
• 2012

In this paper, we propose an efficient lighting control system design for AVR based LSDM control. This paper, an efficient lighting control system design for LSDM control be design divided as the signal control part for I/O data bus and the timer/counter part for clock signal control according to operating conditions. LSDM control logic be optimization to PORTx and DDRx register by specifying the logical value of each bit for effective control signal processing. And, the LSDM control signal by lighting control program execution of ATmega128 be designed to be LSDM lighting control by control logic operating. In this paper, a proposed lighting control system were measured to power loss rate to proved the power loss reduction about lighting status of LSDM control logic by download the lighting control program to system through serial from host PC. As a measurement result, a proposed lighting control system than the existing lighting control system were proved to be effective to the overall power consumption reduction.