• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.54-61
• /
• 2011

In this paper, a simple analytical model for deriving the I-V characteristics of a cylindrical surrounding gate SOI MOSFET with intrinsic silicon core is suggested. The Poisson equation in the intrinsic silicon core and the Laplace equation in the gate oxide layer are solved analytically. The surface potentials at both source and drain ends are obtained by means of the bisection method. From them, the surface potential distribution is used to describe the I-V characteristics in a closed-form. Simulation results seem to show the dependencies of the I-V characteristics on the various device parameters and applied bias voltages within a range of satisfactory accuracy.

• Therapeutic Science for Rehabilitation
• /
• v.2 no.1
• /
• pp.57-65
• /
• 2013

Objective : This study aims to investigate the effect of listening to music for the reduction of unilateral neglect in stroke patients. Methods : This study used a single subject (A-B) design for a stroke patient with unilateral neglect. The subject was trained for 12 sessions in total. Unilateral neglect was measured using a line bisection test and catherine bergego scale. Results : The line bisection test showed decreased mean error scores of treatment period(B) compared with baseline period(A). and catherine bergego scale showed slightly decreased total scores of treatment period(B) compared with baseline period(A). Conclusion : The listening to music showed a beneficial effect for the reduction of unilateral neglect.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.1
• /
• pp.18-29
• /
• 2003

The purpose of this study by examine the effect of visual neglect on hemiplegia motor recovery are showing trouble which can be raised by visual neglect and helping the patient's ADL and functional recovering. Among the patients who are being taken physical therapy in many other hospitals in Busan From February 1st 2002 to august 31st, we chose 20 patients as control group who did not have symptoms of visual neglect and 20 other patients who did have as case group. We used Albert's test and line bisection as visual neglect test, and MAS as motor recovery. The average age of the patient group is 51.55 and that of control is 44.9. The men's rate is higher than women' s in both groups. Although the rate of left hemiplegia is higher than right hemiplegia in case group, that of right hemiplegia is higher than left hemiplegia in control group. There is much lesion site of basal ganglia in case group. There is the most amount of transformation of MAS when visual neglect is shorter than 1.5centimeter. Each change of MAS point before and after therapy in case group and control group is revealed $6.5{\pm}4.37$ and $12.5{\pm}5.95$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2508-2515
• /
• 1996

Determination of an optimal feed rate is valuable in the sense of the precision and efficient machining. In this regard, a new surface roughness model for the face milling operation that considered the radial and axal runouts of the inserts in the cutter body was developed. The validity of the model was proved through the cutting experiments, and the model is able to predict the real machined surface roughness exactly with the information of the insert runouts and the cutting conditions. From the estimated surface roughness value, the maximum feed rate that obtains a maximum naterial removal rate under the given surface roughness constraint can be selected by using a bisection method. Therefore, this mehod for optimizing the feed rate can be well applied to the using a bisection method. Therefore, this method for optimizing the feed rate can be well applied to the using selsction of the cutting condition during the NC data generation in CAM.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.4787-4807
• /
• 2016

Although the dense interconnection datacenter networks (DCNs) (e.g. FatTree) provide multiple paths and high bisection bandwidth for each server pair, the single-path TCP (SPT) and ECMP which are widely used currently neither achieve high bandwidth utilization nor have good load balancing. Due to only one available transmission path, SPT cannot make full use of all available bandwidth, while ECMP's random hashing results in many collisions. In this paper, we present OFPT, an OpenFlow based Parallel Transport framework, which integrates precise routing and scheduling for better load balancing and higher network throughput. By adopting OpenFlow based centralized control mechanism, OFPT computes the optimal path and bandwidth provision for each flow according to the global network view. To guarantee high throughput, OFPT dynamically schedules flows with Seamless Flow Migration Mechanism (SFMM), which can avoid packet loss in flow rerouting. Finally, we test OFPT on Mininet and implement it in a real testbed. The experimental results show that the average network throughput in OFPT is up to 97.5% of bisection bandwidth, which is higher than ECMP by 36%. Besides, OFPT decreases the average flow completion time (AFCT) and achieves better scalability.

• Therapeutic Science for Rehabilitation
• /
• v.5 no.1
• /
• pp.33-42
• /
• 2016

Objective : The purpose of this study was to verify the effects of auditory stimulus using music on unilateral neglect in patients with stroke. Methods : This study used a single subject (ABA) design. The subject who showed unilateral neglect caused by stroke received auditory stimulus using music for 60 minutes per sessions. A total of 20 sessions were conducted. The unilateral neglect was measured by the Star cancellation test and Line bisection test during each session, and Catherine Bergego Scale was used to evaluate the degree of unilateral neglect in daily life pre-and post-test. Also, Positive Affect and Negative Affect Schedule was used to test subject's emotional status. Results : During the intervention period, the results of the Star cancellation test and Line bisection test showed the trend of reduction of unilateral neglect symptom and the effects of intervention were maintained after intervention. After intervention, the results of CBS indicated decreased unilateral neglect symptom in activities of daily living and the results of PANAS indicated increased positive affect. Conclusions : The result of this study indicate that auditory stimulus has a positive effect on the unilateral neglect, and may be considered as alternative choice in clinical occupational therapy for reducing unilateral neglect.

• Therapeutic Science for Rehabilitation
• /
• v.7 no.1
• /
• pp.27-35
• /
• 2018

Objective : The aim of this study was to identify correlation between KF-NAP and Pencil-Paper test(Line bisection test, Letter cancellation, Albert's test) and to determine the high sensitive assessment tool for spatial neglect. Method : Thirty-two stroke patients who admitted to an inpatient rehabilitation unit at the medical center in Seoul from September, 2014 to September, 2015 were included in our research. They all have spatial neglect (male=19, female=13, the average age 61.8). KF-NAP and Pencil-Paper test were performed within 7 days. The detection of spatial neglect was analyzed by total scores of each assessments. Results : The highest sensitivity assessments of spatial neglect was KF-NAP. The detection of spatial neglect through KF-NAP was 93.8% (Line bisection test 53.1, Letter cancellation 53.1%, Albert's test 37.5%). Line bisection test (r=.430), Letter cancellation(r=.641), Albert's test(r=.398) and KF-NAP scores had significant correlation(p<0.05). Conclusion : KF-NAP is higher sensitive in comparison with Pencil-Paper test for detection of spatial neglect as the assessment tool of spatial neglect during activities daily livings of patients and neglect severity could be assessed with KF-NAP. Therefore, KF-NAP is recommended for assessment of spatial neglect.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.173-178
• /
• 1995

This paper presents a new method to obtain parameters of end-mill cutting system. For high speed milling and precision surface finish, we have to predict the deflection of tool and the critical depth of cut. The cutting system can be modeled to a vibratory system to obtain the deflection of tooll and the critical depth of cut. A new method of the modeling of one degree of freedom system was developed using bisection method, ARMA(Autoregressive Moving average) and impact test.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.229-234
• /
• 2006

This paper presents an advanced method of simulation for EM(electromagnetic) environment that affects on mobile receivers. A new calibration algorithm in the process of simulation is introduced. With a proposed calibration method, the time required for simulation is reduced and this makes it possible to simulate a near-real time EM environment in a shielded anechoic chamber. EM environment data acquisition and logging techniques with GPS for simulation were developed.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2003

We suggest Bisection method, Fixed point method and Newton's method for finding the intersection point of a nonparametric surface and a line in $R^3$ and apply ray-tracing in Color Picture Tube or Color Display Tube.