• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.85-90
• /
• 2002

This study was carried out to investigate the dimensional stability of bentwoods by three treatments: steaming, urethane varnish coating, and polyethylene glycol (PEG) treatment. Bentwood processing employed a bending-jig with only 4 cm radius of curvature (ROC). The used species were bitter wood (Picrasma quassioides), painted maple (Acer mono), and birch (Betula schmidtiii). The bending properties of these are well-known in bentwood production (Jung et al., 2002). The bentwoods were treated repeated at room temperature [20℃, RH 80% (12 hours) and 40℃ under RH 10% (12 hours)]. To estimate the dimensional stability of bentwoods, we measured the radius of curvature and end-distance. The best results could be attained with PEG treatment. Steaming was the worst treatment. Comparing the properties of the different species, the dimensional stability of bitter wood was excellent. It was concluded that the steaming treatment was unsuitable for dimensional stability of bentwoods.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.4
• /
• pp.18-27
• /
• 1997

This study was performed to obtained the optimal delignified condition of exploded wood on the acid hydrolysis with sulfuric acid. Wood chips of pine wood(Pinus desiflora), oak wood(Quercus serrata) and birch wood (Betula platyphylla var. japonica) were treated with a high pressure steam (20-30kgf/$\textrm{cm}^2$, 2-6 minutes). The exploded wood was delignified with sodium hydroxide and sodium chlorite, and then hydrolyzed with sulfuric acid. The result can be summerized as follows ; In the exploded wood treated with sodium hydroxide, the optimal concentration of sodium hydroxide was 1% as content of lignin in the exploded wood. Lignin content of exploded wood treated with sodium chlorite was lower then that sodium hydroxide. The maximum reducing sugar yield of exploded wood treated with 1% sodium hydroxide was lower than non-treated exploded wood. In the case of sodium chlorite treated, the maximum reducing sugar yield was hgher than non-treated exploded wood. Sugar composition of acid hydrolysis solution was composed of xylose and glucose residue, and the rate of glucose residue was increased in high pressure condition.

• Journal of the Korea Furniture Society
• /
• v.18 no.2
• /
• pp.143-146
• /
• 2007

This study was carried out to assess the dimensional stability of wood material treated by plastic processing for bentwood and compression wood. The evaluation method was different between two wood materials, but the treatments for them were very similar to each other. One of the main methods is heat treatment with sufficient water vapor. In bentwood, the used species were painted maple (Acer mono), bitter wood (Picrasma quassioides) and birch (Betula schmidtii). Steaming was the worst treatment method for dimensional stabilization of bentwood. The best results could be attained with PEG treatment for dimensional stabilization of bentwood. Dimensional stability of bitter wood was found to be conspicuous. However the steaming treatment at lower temperatures, i.e., about $130^{\circ}C$ was not suitable for dimensional stability of bentwood. In compression wood, the used specimen was Italian poplar wood (Populus euramericana). Two heat compressive pressing conditions, an open-press system and an air-tighten closed-press system, were used. The recovery rate was measured after boiling and/or absorbing in water to estimate the dimensional stability of heat compressed wood. The best dimensional stability of compressed wood in the air-tighten closed-press system was found to be better at $200^{\circ}C$ than $180^{\circ}C$. The best compression rate for dimensional stability was 73 percent.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.3
• /
• pp.81-92
• /
• 1998

Lately public interest in tree saps of maple and birch trees has been increased for sap drink as a natural medical beverage. To ensure tree sap drink for commercial production, species which are available in resources, their ecological regeneration characteristics in the natural forest stand, and tree sap resources should be investigated. Species for the collecting tree saps and their distribution were surveyed in the areas of Mt.Sobaek, Tanyang-gun, Chungcheongbuk-do. Mt.Sobaek area was selected to the proper place to survey as the feasible area for tapping tree saps for the natural beverage. Feasible tree species of this area are Betula costata, Betula schmidtii, Comus controversa, Acer mono, and Acer pseudosieboldianum based on the estimated tree sap amounts. Average and maximum species diversities of surveyed area were 4.2 and 5.39, respectively. Its evenness 0.78 referred that there are actively progressing ecological regeneration among diverse tree species. Tree saps are mainly harvested at the areas of upper and lower Wonmanteo. In terms of species, the most high sap amounts were from birch sap, next Comus controversa, the 3rd Acer mono. Many measures were suggested ecologically and technically, for commercial or practical production of tree sap drinks, though Mt.Sobaek area was evaluated as improper place because of geographical and transportational limitation.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.75-80
• /
• 1997

This research has been examined to measure the degree of the fiber damage of ozonenation high yield pulp in the beating process. Ozone treated the TMP(Thermomechanical Pulp) and CTMP(Chemithermomechanical Pulp) of spruce and the CTMP of birch has been beaten to be reached 200ml(freeness) of its content. It had been studied the forming of fiber distribution by treatment for long fiber, short fiber, fine with the above method. As ozone treatment time gets longer, the pulp has showed the tendency of increasing the fiber content of 28, 48mesh. Ozone treated fiber has been increased long fiber content by being added softness. By given longer ozone treatment time, the TMP and CTMP of spruce has showed the decreasing of fiber content. On the contrary, CTMP of birch has showed the increasing its fiber content. It had proved that the results of difference are rather closer to the species of tree than closer to the kinds of pulp. The fiber content of over 200mesh which has created in beating process demonstrates the decreasing of its fiber content by getting longer ozone treatment time. The softness of fiber can be extracted by the lignin of fiber surface that had been formed by ozone treatment. Thus we assume that the fiber in the process of beating obtains less physical damage.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.5
• /
• pp.440-450
• /
• 2009

In case of wood flooring, the high emissivity would be one of the most important properties especially as the cover material of underfloor heating system. The FIR (Far Infrared) materials such as wood emit FIR energy by heating, which has been used as the medical therapy such as dry sauna. This research investigated the emissivity and the emission power of wood composites by comparing the amount of the three heat transfer modes transferred by infrared radiation which came from the increased temperature of the bottom board of the plywood box by the heater. The results showed the value of radiation mode was the highest mode for the plywood box, and the convection mode was the main mode for the aluminum box. The rate of convection was 81.8% in the aluminum box and 48.2% in the plywood box, respectively. In case of the rate of radiation, the aluminum box showed only 15.4% and the plywood box showed 51%. The emissivity and the emission power of birch plywood showed the same values as those of wood. The amount of energy required for the temperature rising of water within vial in the aluminum box and in the plywood box were 3.32 kJ and 6.70 kJ respectively, which showed that the vial temperature of the plywood box was two times higher than that of the aluminum box.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.4
• /
• pp.65-72
• /
• 1992

Steam defiberated pulp and steam exploded wood(birch chip) were extracted with solvents (hot-water, 1% NaOH, MeOH, hot water, 1% NaOH). The properties of residual fiber were examined for the utilization as ruminants feed. The digestibility is 38% in steam defiberated pulp(10kg /$cm^2$-15min) and 62-77% in exploded wood(17-18kg/$cm^2$-2~10min), respectively. The more steam pressure and time increase, the more the digestibility increase. The sugars obtained from extractives is amount from 7% to 13% in asplund pulp and from 7% to 10% in exploded pulp. The sugars was mainly composed of 70-80% xylose. The digestibility of residual fiber which is extracted with solvents is low than these of original fibers. Considering the yield and digestibility as ruminant feed, exploded pulp under 17kg /$cm^2$ for 10min has the best efficiency. The exploded wood gives 75.3% on yield(O. D. chip) and 48% on the digestibility.

• Journal of the Korea Furniture Society
• /
• v.16 no.2 s.30
• /
• pp.59-65
• /
• 2005

As physical condition of students improves, there is a need to develop human body-friendly desk and chair for students. In this study, desks and chairs were manufactured with curved veneer lamination under high frequency heating and pressing, using ten wood species such as Japanese red pine, Korean pine, pitch pine, Japanese larch, yellow poplar, black locust, oak, radiata pine, beech, and birch. The performance of these products were evaluated. The results obtained were summarized as follows; With high frequency heating, the turned lamination of veneers with full size sheet ($3{\times}6\;feet$) prepared by rotary lathe peeling was successfully applied for making the members of desk top, leg frames of desk and chair. Bending strengths of desk tops were relatively greater for yellow poplar, black locust and red pine, which were similar to those of beech and birch. Bending strengths of desk legs were classified into greater species group (red pine, yellow poplar, larch) and lower species group (radiata pine, Korean pine, pitch pine). Compressive strengths of chair legs in parallel direction to the lamination were greater in black locust and larch. On the other hand, differences between outer and inner gap at the top and drawer bottom of desk top were rather larger for the laminations of birch and beech, and less for those of yellow poplar and pitch pine, showing greater stability of open drawer space. In results, yellow poplar, larch, pitch pine and red pine showed good appearance and strength properties at the curved veneer lamination. Accordingly, it was believed that these domestic woods were able to substitute for birch which was being imported for the use of veneer-laminates type furniture.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.460-465
• /
• 2008

When wood is exposed to natural weathering and UV radiation discoloration progresses. The color variation of heat-treated wood was investigated. Four domestic species were selected and heat-treated at $220^{\circ}C$ and naturally weathered for 42 days. Their colors were measured with a portable colorimeter. The color variations were different between species. The Korean red pine specimens were highly discolored by the natural weathering even though they were heat-treated. In contrast to Korean red pine, Korean pine is less discolored. The maximum color difference of larch was lower than Korean red pine. All specimens of birch exceeded the color difference criterion of 15 after 25 hours with the maximum of 28.

• Current Research on Agriculture and Life Sciences
• /
• v.9
• /
• pp.103-108
• /
• 1991

The chemical characteristics of lignin in the differentiating xylem were investigated and compared with those of mature-wood. The compound middle lamella lignin deposited in the early stage of lignification of cell walls in the softwood(Larch) as well as the hardwood(Birch) was confirmed to be the so-called guaiacyl-type lignin and was found to have a relatively larger content of phenoxy hydroxyl group as terminal units and to be more abundant in condensed-type structures like as phenylcoumaran structures compared with mature-wood lingin.