• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2021년도 춘계학술대회
• /
• pp.37-37
• /
• 2021

Calystegia soldanella L. is a perennial herbaceous halophyte belonging to the convolvulaceae family, which mainly grows in coastal sand dunes in Korea. Shoots and rhizomes are edible, and roots called 'Hyoseon Chogeun' are known to have medicinal effects such as antipyretic, sterilization, and diuretic. In addition, physiological activities of antioxidant, anti-inflammatory, antiviral, antifungal and PTP-1B (protein tyrosine phosphate-1B) inhibition have been reported. In this study, in vitro induction cell lines of C. soldanella L. collected from the coastal sand dunes in Jeju island was redifferentiated into adventitious roots that can be used as medicinal resources. Also the biomass of mass-proliferated adventitious roots using a bioreactor were evaluated. Plants of C. soldanella L. were collected from the crevice of the seashore in the coastal area of Taeheung 2-ri, Namwon-eup, Seogwipo-si. Then, it was separated into leaves, stems, rhizomes, and roots, and surface sterilized with 70% ethyl alcohol and 2% NaOCl (sodium hypochlorite). After washing with sterilized water, each organ section was cultured in Hormone-free MS medium (Murashige & Skoog Medium). As a result, the induction response rates were evaluated at 85% and 55%, respectively, in terms of callus formation and shoot generation in the rhizome segment. In the case of the adventitious roots morphological characteristics induced by single-use treatment of auxin-based plant growth regulators IBA and NAA from redifferentiated shoots were compared. Most efficient adventitious root culture method as a rooting rate, number, length, and biomass proliferation in the bioreactor system was confirmed when treated by culturing in MS salts, Sucrose 30 g·L^-1, and IBA 1mg·L^-1 for 4 weeks. In this study, the medium composition and culture period were confirmed using a bioreactor system to mass-proliferate adventitious roots derived from C. soldanella L. in Jeju island. Also this adventitious root line developed a new medicinal material could increase value of the bio-industry ingredient through quantitative and qualitative screening of phyto-bioactive compounds.

• 한국해양바이오학회지
• /
• 제1권4호
• /
• pp.292-297
• /
• 2006

오염된 양식 해수의 수질정화능력이 뛰어난 광합성세균의 고순도 대량배양을 위한 실험을 실험실 단위 및 파이롯트 단위에서 수행했다. Gas pack 반응기, flask 반응기 및 N-source로서 질소 가스를 사용한 실험 결과, 광합성세균은 현미경상 약 90%이상의 순도를 나타내었고, CFU 측정 결과에서도 붉은색을 띄는 광합성세균 colony만을 관찰 할 수 있었다. 배지의 교차에 의한 배양실험에서 기초배지를 이용한 배양이 광합성세균의 성장에 가장 효과적임을 알 수 있었다. 이러한 배양조건하에서의 5L bioreactor 배양에서 비증식속도가 $0.18h^{-1}$로 나타났고, 실험실 단위의 결과를 이용한 pilot 단위에서의 배양결과, 실험실 단위의 비증식속도와 동일한 값을 얻을 수 있었다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권4호
• /
• pp.185-193
• /
• 2002

With Increasing awareness towards environment-friendly and non-toxic pesticide azadirachtin obtained from neon tree (Azadirachta indica) is gaining more and more importance. Its broad-spectrum activity, Peculiar mode of action. eco-friendly and non-toxic action towards beneficial organisms has offered many advantages over chemical pesticides. All currently use commercial formulations based on azadirachtin contains azadirachtin extracted from seeds of naturally grown whole plants which is labour intensive process depending upon many uncontrollable geographical and climatic factors. Plant tissue culture can be a potential process for the pro-duction, offering consistent, stable and controlled supply of this bioactive compound, However the research on tissue culture aspects of production are in preliminary stage and requires culture and process optimization for the development of a commercially viable process. This review states the present status and future challenges of plant tissue culture for azadirachtin production.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2005년도 춘계학술대회 및 국제심포지움 초록집
• /
• pp.186-186
• /
• 2005

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2005년도 추계학술대회 및 한일 식물생명공학 심포지엄
• /
• pp.314-314
• /
• 2005

• KSBB Journal
• /
• 제13권1호
• /
• pp.108-113
• /
• 1998

본 연구에서는 하이브리도마 세포를 T-flask, spinner flask, 그리고 2L bioreactor에서 batch 배양하여 배양 방법에 따른 세포성장과 대사의 차이점을 살펴보고, 이것의 영양원 분석을 토대로 배지를 강화함으로써 세포성장을 제고하고자 하였다. 배양방법에 따른 세포성장의 차이를 살펴보는 실험에서 Spinner flask와 배양기를 이용한 배양에서는 비슷한 세포성장과 아미노산의 대사를 관찰할 수 있었으나 T-flask 배양에서의 세포성장과 대사는 나머지 두 배양과 현격한 차이를 보였다. 아미노산, 포도당, 그리고 비타민이 강화된 배지를 이용함으로써 원래의 IMDM 배지를 이용한 배양에서보다 70% 정도 높은 세포농도를 얻을 수 있었다. 그러나, 비타민 강화에 따른 에너지 대사의 변화가 관찰되어 이에 대한 연구의 필요성이 제시되었다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권6호
• /
• pp.528-534
• /
• 2005

Hairy root cultures have demonstrated great promise in terms of their biosynthetic capability toward the production of secondary metabolites, but continue to constitute a major challenge with regard to large-scale cultures. In order to assess the possibility of conducting mass production of biomass, and the extraction of useful metabolites from Panax ginseng. P. ginseng hairy roots, transformed by Rhizobium rhizogenes KCTC 2744, were used in bioreactors of different types and sizes. The most effective mass production of hairy roots was achieved in several differently Sized air bubble bioreactors compared to all other bioreactor types. Hairy root growth was enhanced by aeration, and the production increased with increasing aeration rate in a 1 L bioreactor culture. It was determined that the hairy root growth rate could be substantially enhanced by increases in the aeration rate upto 0.5vvm, but at aeration rates above 0.5vvm, only slight promotions in growth rates were observed. In 20 L air bubble bioreactors, with a variety of inoculum sizes, the hairy roots exhibited the most robust growth rates with an inoculum size of 0.1% (w/v), within the range 0.1 to 0.7% (w/v). The specific growth rates of the hairy root decreased with increases in the inoculum size.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.232-237
• /
• 2005

The cellulloytic enzymes, such as FPase and amylase, production by Trichoderma inhamatum KSJ1 using 10L air circulation bioreactor were tried. Physical properties of the employed bioreactor, mixing time, $k_{L}$ a were examined in airflow conditions of enzyme production cultures. Mixing time of distilled water at 0.6, 1.2, 1.8 vvm were 25, 21, 9 sec, respectively, and mandel's medium using rice straw and pulp as carbon sources were 31, 25, 15 sec. Mixing time decreased when airflow rate increased. $k_L$ a of distilled water at 0.6, 1.2, 1.8 vvm were measured -22.52, -29.31, -39.62, respectively, and the mandel's medium were -47.8, -18.5, -21.4. The $k_L$ a values was increased linearly as the air-flow rates increased. However the values in mandel's medium showed different results, especially at 0.6 vvm. Amylase and FPase activity at the 1.2 vvm was 3.39U/mL, 0.72U/mL in 5 days cultivation. and the activities at 0.6 vvm were 2.01U/mL, 0.39U/mL, respectively. The enzyme productivity at 1.2 vvm was higher than at 0.6 vvm, indicating that high oxygen tension is requested for the efficient enzyme production culture of T. inhamatum KSJ1.

• Journal of Plant Biotechnology
• /
• 제6권4호
• /
• pp.265-268
• /
• 2004

Cell growth and ginseng saponin production by large-scale suspension (bioreactor) cultures of Panax ginseng were investigated under various inoculum sizes. Cell growth was low at an inoculum size of 40 g FW/L, and the maximum cell growth was obtained with increasing inoculum size up to 100 g FW/L. The cell density of 333 g FW/L and 12.7 g DW/L was obtained at inoculum size of 100 g FW/L after 30 days of cultivation. Maximum saponin production of $4.40\;\cal{mg/g}$ DW was achieved at 60 g FW/L of inoculum size. Thus, inoculum size 60 g FW/L was suitable for optimum biomass accumulation as well as saponin production during bioreactor cultivation of ginseng suspension cells.

• 한국기계가공학회지
• /
• 제13권2호
• /
• pp.1-7
• /
• 2014

Recent experimental observations support the hypothesis that mechanical stimuli play a role in regulating the specialized molecular expression of articular cartilage in vitro and in vivo. Other studies have demonstrated that the continuous passive motion(CPM)bioreactor for whole joints can provide a platform for possible future in vitro studies and applications, including possible interactions of bio-mechanical and biochemical signals. In this study, we have developed acustom-made bioreactor capable of bending and stretching with circular type motion, and a biomimetic knee joint model, using a 3D printer. This system could be used to investigate the effects of rehabilitative joint motion of dynamic culture.