• 제목/요약/키워드: biomedical instrument design

검색결과 14건 처리시간 0.02초

Novel Quasi-Elliptic Function Bandpass Filter Using Hexagonal Resonators with Capacitive Loading

  • Wang, Changtao;Li, Wenming;Liu, Feng;Liu, Haiwen
    • ETRI Journal
    • /
    • 제30권4호
    • /
    • pp.615-617
    • /
    • 2008
  • A novel and compact elliptic-function bandpass filter is proposed in this letter. The techniques of slot etching and the addition of open stubs are applied to enhance the self-inductance and self-capacitance of hexagonal open-loop resonators. Thus, size reduction and improved transmission performance are obtained. Compared to the performance of the conventional design, the central frequency and insertion loss are reduced by 28% and 3.1 dB, respectively. Measurements show that the proposed filter has a fraction bandwidth of 23% at the central frequency of 1.84 GHz, and its insertion loss in the passband is less than -1.5 dB. The bandpass filter occupies only 12 mm${\times}$21.2 mm (approximately $0.24{\lambda}_g{\times}0.14{\lambda}_g$).

  • PDF

Design of Optimized Ultrasound Clinical Work-Flow; Usability Perspective

  • Bag, ByungEun;Yoo, SunKook;Jang, WonSeuk
    • Journal of International Society for Simulation Surgery
    • /
    • 제2권1호
    • /
    • pp.40-42
    • /
    • 2015
  • Purpose Usability is an important factor in our life. This paper presents an approach to design the clinical work-flow for ultrasound system. And, we tried to apply this work-flow in diagnosis ultrasound system. Materials and Methods For user learnability, we follow international standard IEC 60601-1-1 and IEC 62366 which describes usability of medical instrument. User requirement are applied by 10 clinicians who are well aware of usability. We considered user environment and designed clinical work-flow into two types: general use and emergency use. The designed clinical work-flow was evaluated by 10 clinicians and results derived from the evaluation were analyzed. Results We could successfully design optimized clinical workflow of ultrasound system. Conclusion This paper suggests usability testing for optimized ultrasound clinical workflow. Using this clinical work flow, users can enhance their clinical performance and reduce operation time.

헬스케어 재활훈련기 디자인 평가 요소 개발에 관한 연구 (A Study of Evaluation Index Development of Healthcare Rehabilitation Device Design)

  • 조재상;권대규;홍정표
    • 감성과학
    • /
    • 제17권3호
    • /
    • pp.129-142
    • /
    • 2014
  • 오늘날 고령인구의 증가와 장애인 인구의 증가로 인해 재활훈련기의 수요가 증가하고 있고, 재활훈련기와 사용자간의 제공받아야 할 서비스에 대한 평가 요소의 요구가 커지고 있다. 본 연구에서는 재활훈련기 디자인 평가에 있어서 평가 방안을 모색하기 위해 디자인 평가를 위한 기본 요소를 파악하고 이를 통하여 재활의료전문가, 의공학자, 디자이너들의 토의 및 분석, 실험을 통하여 새로운 평가 요소들을 도출하였다. 연구의 결과는 다음과 같이 요약된다. 첫째, 기존 디자인 평가 요소들을 수집, 분석하여 10가지의 재활훈련기 디자인 평가요소와 44개의 세부 평가항목을 구축하였다. 이는 앞으로 재활훈련기를 디자인하는데 있어서 중요한 평가 기준이 될 것이다. 둘째, 헬스케어 재활훈련기 디자인 개발 시 고려해야 할 디자인 평가요소로는 사용성, 인지성, 안전성, 학습성, 운동성, 내구성, 경제성, 공간성, 심미성, 환경성의 10가지 디자인 평가요소가 있다. 셋째, 환경성, 공간성, 인지성, 사용성, 경제성, 심미성의 디자인 평가요소는 제품디자인에서 공통적으로 고려해야 할 요소들이고, 학습성, 안전성, 운동성, 내구성의 요소는 재활훈련기 디자인 평가요소에서 매우 중요하게 고려해야 할 요소이다. 넷째, 재활훈련기 디자인 평가요소는 제품디자인요소에서 중요하게 고려되는 환경성, 공간성, 인지성, 사용성, 경제성, 심미성에 학습성, 안전성, 운동성, 내구성을 의 요소를 더해 중요하게 생각한 것이 기존 제품디자인 평가요소와 재활훈련기 디자인 평가요소의 차이점이다. 본 연구에서는 10개의 재활훈련기 디자인 평가요소와 44개의 세부 평가항목 구축에 대한 연구를 진행하였다. 이는 전체적인 재활훈련기 디자인 평가요소만을 연구한 것으로, 향후연구에서는 시 제품 제작을 통하여 평가요소들을 실제 재활훈련기 디자인에 적용해 보고, 미진한 점들을 수정 보완할 예정이다.

반도체식 Chopper를 이용한 정밀직류증폭기의 설치 (Precision DC Amplifier Design using Semiconductor Chopper)

  • 김원기
    • 대한의용생체공학회:의공학회지
    • /
    • 제2권1호
    • /
    • pp.55-64
    • /
    • 1981
  • The important parameters of DC amplifier, which is widely use4 for the medical and engineering fields, are input offset voltage and temperature drift. Chopping amplifier reduces approximately 10% the parameters changing than monolithic operational amplifier. In this study, a chopping amplifier with semiconductor chopper is designed and tested, this chopper is realized by CMOS analog switch and timing circuits. The test results approve that designed amplifier is suitable for precision instrument DC amplifier.

  • PDF

골절치료용 체외고정기기 개발을 위한 연구 (Development of the External Fixator for a Bone Fracture)

  • 윤희열;한정수;한창수
    • 대한의용생체공학회:의공학회지
    • /
    • 제23권4호
    • /
    • pp.317-322
    • /
    • 2002
  • 본 논문에서는 연구를 통하여 지금까지 개발된 체외고정기기의 문제점을 파악하고, 기존의 단점을 보완하기 위하여 제품이 가져야 할 특성을 나열하였다. 이를 위해서 X-ray 투과성을 이용하여 신체내부를 연속적인 동화상으로 구현해주는 장치인 C-arm을 이용하였다. 이 데이터를 토대로 하여 실제 기구부 설계 시 중요한 설계요건을 도출할 수 있었다. 원위요골 (Distal Radius) 골절의 치료를 위해 적용되어야 할 기본 메커니즘을 확정한 후. 3차원 설계작업을 위한 tool인 Solid Edge program을 이용하여 실측에 가까운 기구부 설계를 정밀하게 구현하는 작업을 마침으로써 실제 시제품 제작을 위한 모든 제반과정을 수행하였다.

약물치료법의 개선을 위한 이온토포레시스 시스템의 개발 (Development of lontophoresis System for Transdermal Drug Delivery)

  • 양경모
    • 대한의용생체공학회:의공학회지
    • /
    • 제18권2호
    • /
    • pp.127-132
    • /
    • 1997
  • Recently there has been increased interest in the use of iontophoresis for the transdermal delivery of drugs, both ionic and nonionic. The use of iontophoresis has been rare over the years due to the lack of domestic supplies of the instrument and the expensive iontophoresis instrument made by foreign country. The purpose of this study was to design a commercially available iontophoresis system (WIT- 1 ). The efficacy of WT- 1 system was well defined. In clinical trial, procaine iontophoresis produced local anesthesia of significantly longer duration than swabbing and placebo groups. The 4% procaine iontophoresis using WIT-1 significant difference in anesthetic duration between WIT- 1 system and IontopherTM PM system. The result of this study suggest that WIT-1 system can be used for the transdermal delivery of drugs in various clinical conditions.

  • PDF

국내 간호학생 대상 윤리관련 연구 동향 (Trends of the researches related to ethical topic in Korean nursing students)

  • 진은주;강현주
    • 한국간호교육학회지
    • /
    • 제26권4호
    • /
    • pp.402-411
    • /
    • 2020
  • Purpose: The purpose of this study is to explore the trends of research related to ethical topics in Korean nursing students. Methods: A total of 131 articles that were published from 2000 to 2020 were analyzed and summarized according to publishing type, research design, subject, data analysis method, main research topic, research variables and instrument. Results: Most studies were journal articles (93.9%) and their most frequent research design was survey (75.7%). The research subjects covered all grades (35.1%) or they were divided between clinical nursing practicum (29.8%) or not (21.4%). The main research topics were biomedical ethics, ethical values, moral judgment and ethics education. Recently, ethical decision making and practical ability in nursing practice were reported. The instruments for measuring variables were limited and the same tools were used several times. Conclusion: Based on the findings of this study, it is suggested that the selection of various research topics and the application of research methods related to ethics for nursing students will continue in response to rapidly changing social phenomena in the future. In particular, it is necessary that research related to ethical and practical ability as well as ethical attitudes and perceptions of nursing students be actively carried out.

DSP를 이용한 원격 진료용 송수신 단말기 설계 (The transceiver design for telemedicine using DSP)

  • 이종회;이주원;조원래;한석붕;이건기
    • 한국정보통신학회논문지
    • /
    • 제3권1호
    • /
    • pp.97-104
    • /
    • 1999
  • 본 연구는 외부에서 발생하는 응급 환자의 심전도 신호를 병원에서 신속 정확히 파악해 필요한 조치를 의사의 지시 하에 취할 수 있는 DSP를 이용한 원격 진료용 송ㆍ수신 단말기를 설계하였다. 이 송ㆍ수신 단말기는 심전도 계측 장비에서 얻어진 동적 데이터의 실시간 전송과 음성 신호의 쌍방향 통신을 위해 DSP를 이용하여 진폭 변ㆍ복조 방식의 일종인 DSB-SC 방식을 이용하여 설계하였고, 각 단말기의 필터는 HR 필터로 구현하였다. 본 연구에서 설계된 시스템은 DSP를 이용하였기 때문에 소형ㆍ경량화를 실현시킬 수 있었으며, 프로그램의 수정만으로 다양한 생체 신호에 적용 할 수 있다.

  • PDF

형광 발현 암세포 탐지를 위한 맞춤형 검출시스템 개발 (Design of a customizable fluorescence detection system for fluorescently labeled tumor cells)

  • 조경래;서정혁;최세운
    • 한국정보통신학회논문지
    • /
    • 제23권3호
    • /
    • pp.261-266
    • /
    • 2019
  • 유동 세포 분석법은 세포나 입자에 대하여 정밀하고 다양한 광학적 특성을 제공해주는 전기적 탐지 기술이다. 형광 처리된 세포나 미립자에 특정한 파장의 빛을 가함으로써 발생 되는 광 산란과 형광 방출을 통해 세포의 크기와 입상도를 포함한 다차원적인 정보를 제공해주는 유동 세포 분석법은 생체 의학 분야 또는 생물 물리학 분야에서 중요한 역할을 수행한다. 그러나 유동 세포 분석법은 고가이며 장비 설치에 있어 적절한 공간이 필요하고 형광 염료 선택에 제한적이라는 단점을 가지고 있다. 따라서 본 논문에서는, 상용화된 유동 세포 분석에 사용되는 고가의 레이저와 운영시스템 대신 발광 다이오드, 마이크로 컨트롤러와 광 검출기를 사용한 저가의 형광세포 측정 시스템을 개발하여 사용자가 원하는 형광 염료에 대한 자유도를 높였다. 또한, 3D 프린터를 사용하여 모듈별 소형화 및 경량화를 통한 사용자 맞춤형 제작이 가능하도록 하였다. 그 결과, 형광처리 한 세포의 양에 변화를 주어 발광도를 측정하였을 때, 높은 선형성이 보임을 확인할 수 있었다.