• Journal of Biosystems Engineering
• /
• 제27권1호
• /
• pp.1-10
• /
• 2002

This study was carried out to investigate experimentally the effect of three factors(dynamic load, inflation pressure and number of passes of tire) on soil compaction under the tire. The experiment were conducted with a 6.00R14 radial-ply tire for sandy loam soil using soil bin system. To evaluate the effect of three factors on soil compaction under the tire, the sinkage. density and volume of soil under the tire were measured fur the three levels of dynamic load(1.17kN, 2.35kN and 3.53kN), for the three levels of tire inflation pressure(103.42kPa, 206.84kPa and 413.67kPa), and for three different number of passes(1, 3 and 5). The results of this study can be summarized as follows : 1. As dynamic load, inflation pressure and number of passes of the tire increased, soil sinkage and density increased. and volume of soil decreased. Thus increase in dynamic load, inflation pressure and number of passes of the tire would increase soil compaction. 2. The effect of tire inflation pressure on sinkage. density and volume of soil under the tire was relatively less than that of the dynamic load. Therefore, it was concluded that dynamic load was more important factor affecting soil compaction in comparison to the inflation pressure of tire. 3. The effect of three different factors on sinkage, density and volume of soil decreased as the soil depth increase. Consequently, it was fecund that soil compaction at a shallow depth in soil was larger than that at deep place in soil.

• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2004년도 정기총회 및 제33차 춘계 학술대회
• /
• pp.384-387
• /
• 2004

The purpose of the present investigation was to develop a novel method for cell immobilization. Aureobasidium pullulans cells were mixed with an alginate solution, and the mixture was extruded to form small gel beads as hydrated- immobilized cells. The beads were then placed at $-15^{\circ}C$ for 6-24 h to induce freeze-dehydration. The freeze-dehydration resulted in shrinkage of beads due to water removal reducing bead volume by 82% and bead weight by 85%. The dehydrated beads were successfully used for the production of fructo-oligosaccharides in a model reactor system. This study showed that bioreactor performance can be improved up to 2 times by the use of the dehydrated beads.

• 생물환경조절학회지
• /
• 제2권2호
• /
• pp.110-118
• /
• 1993

본 실험은 유기물 대체재료로서 peatmoss(원예용 배양토)의 물리, 화학적 특성을 조사하고, 배양상 종류와 관수방법이 고추묘의 생육에 미치는 영향을 보고자 실시하였으며 그 결과는 다음과 같다. 1. Peatmoss에 밭흙을 1:1, 1:2로 배합한 경우에도 고추묘의 생육에 적합한 화학적 성질을 보였다. 2. 고추묘의 발아율은 저면관수보다 철수관수 처리시 월등히 높았으며, peatmoss, TKS 단독 처리구를 제외하고는 배양토 종류간의 차이는 없었다. 3. 전반적으로 철수관수보다 저면관수 처리시 생육이 양호하였으며, 특히 peatmoss와 밭흙을 1:1, 1:2로 배합한 처리구의 생육이 가장 양호하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1341-1352
• /
• 2001

Vacuum freeze drying process by which frozen water in a drying material is removed sublimation under vacuum condition, is now applied to various industrial field such as the manufacturing and packaging of pharmaceuticals in pharmaceutical industry, the drying of bio- products in bio-technology industry, the treatment of various quality food stuff in food technology, and so on. The Knowledge about the heat and mass transfer characteristics related with the vacuum freeze drying process is crucial to improve the efficiency of the process as well as the quality of dried products. In spite of increasing needs for understanding of the process, the research efforts in this fields are still insufficient. In this paper, a numerical code that can predict primary drying in a vial is developed based on the finite volume method with a moving grid system. The calculation program can handle the axis- symmetric and multi-dimensional characteristics of heat and mass transfer of the vial freeze drying process. To demonstrated the usefulness of the present analysis, a practical freeze drying of skim Milk solution in a vial is simulated and various calculation results are presented.

• 한국환경과학회지
• /
• 제19권3호
• /
• pp.313-321
• /
• 2010

This study was carried out to investigate the emissions of the air pollutants from the automobile in Suwon city. To estimate emissions due to by automobile the data of express highway and the national road used an observation traffic volume, and the other roads used a method by Vehicle kilometer traveled(VKT). In the emissions due to by automobile from Suwon city, CO was highest 36,290.4 ton/year, NOx at 19,392.1 tons, HC 5,095.4 tons and PM 2,788.7 tons was highly order. SOx emissions in the whole Suwon city by fuel types was investigated with 178ton/year from the Diesel motorcar, 26.9 ton/year and 6.2 ton/year from the gasolines and LPG automobiles, respectively. VOC emissions from the automobile was investigated with 366.4 ton/year (29.22%) from Gwonseon-gu, 329.2 ton/year (26.25%) Yeongtong-gu, 319.9 ton/year (25.51%) Jangan-gu, 238.6 ton/year (19.03%) Paldal-gu.

• 생물환경조절학회지
• /
• 제3권1호
• /
• pp.52-57
• /
• 1994

방울토마토의 수경재배시 과실의 외형형질을 비파괴적으로 추정하고, 이를 검정하였다. ‘Chelseamini’와 ‘뽀뽀’에 비해 ‘Minicarol’의 외형상의 크기(과장, 과폭, 과중, 과실부피)가 특히 작았다. 토마토 과실의 외형형질 간에는 고도의 상관이 인정되어 과실의 생장은 길이생장과 부피생장과 균형있게 이루어지는 것으로 나타났다. 과실의 체적 및 무게는 다음 식으로 추정 가능하였다. 과실의 체적=0.071$\times$(과장+과폭)$^3$＋0.451, 과실의 무게 =0.072$\times$(과장+과폭)$^3$＋0.542. 1993-1994년에 수확한 과실도 이 식으로 설명되었다.

• 한국식품영양과학회지
• /
• 제43권11호
• /
• pp.1791-1795
• /
• 2014

본 연구에서는 HPLC를 사용하여 채소류 식품군에서 비타민 K1의 분석법을 확립하고 이에 대한 분석법 검증하고자 하였다. 그 결과 본 시험법에서 표준용액의 피크유지시간과 부추 추출액의 피크유지시간이 일치하여 특이성을 확인하였다. 검량선의 상관계수($R^2$)는 0.9994 이상으로 높은 유의수준을 보여 분석에 적합함을 알 수 있었으며, 검출한계는 0.1335 ng/injection volume($50{\mu}L$)이었고 정량한계는 0.2784 ng/injection volume($50{\mu}L$)으로 설정되었다. 일내, 일간분석에서 정밀도를 나타내는 변동계수(coefficient variation, CV)는 표준용액에서 각각 1.979%, 2.107%로 나타내었고 정확성은 99.439%로 나타내어 채소류에서 비타민 K1의 분석법이 적합한 시험법임이 검증되었다. 본 분석법에 따라 채소류의 비타민 K1을 분석한 결과 식품공전의 효소를 이용한 분석법보다 더 높은 추출률을 나타내었으며 다른 물질의 간섭 없이 분석 가능하여 채소류의 비타민 K1의 검출에 응용되어 이용될 수 있을 것으로 판단된다.

• Composites Research
• /
• 제31권5호
• /
• pp.209-214
• /
• 2018

본 연구에서는 친환경적이고 공급이 안정적인 소재를 찾기 위하여, Bio waste인 쌀겨와 조개 껍질에서 활용하여 마이크로 사이즈의 미세 입자를 추출하고, 추출한 입자의 크기와 형상을 분석한 후 CFRP에 첨가하여 물성의 변화를 관찰하였다. 쌀겨와 탄화 쌀겨의 주요구성성분은 탄소, 산소, 규소로 이루어졌으며 탄화과정을 거치면서 탄소와 규소의 비율이 증가함을 확인하였고, 조개 껍질 분말에서는 탄소 산소와 칼슘이 검출되었으며 이는 조개 껍질의 주요구성물질인 탄산칼슘의 영향으로 보인다. 쌀겨 분말의 면적평균은 $6.19{\mu}m$ 체적평균은 $14.77{\mu}m$으로 FE-SEM을 통하여 막대형상의 입자가 관찰되며 이는 쌀겨가 가지고 있던 껍질부분의 주름이나 표면의 털이 남아있는 형상으로 보인다. 탄화쌀겨의 분말은 면적평균은 $1.55{\mu}m$ 체적평균은 $8.20{\mu}m$ 조개 껍질 분말은 면적평균은 $2.53{\mu}m$ 체적평균은 $5.79{\mu}m$로 분석되었으며 쌀겨분말의 경우 막대(Rod)형상의 입자들이 관찰되었고, 조개 껍질 분말의 경우 판상(Plate)의 형상을 가지는 것으로 관찰되었다. CFRP에 첨가하였을 경우 첨가량에 비례하여 물성의 하락이 관찰되었는데 그 폭이 쌀겨분말의 경우가 가장 컸으며, 조개 껍질 분말의 경우 물성하락을 거의 유발하지 않음을 확인하였다.

• 환경생물
• /
• 제22권4호
• /
• pp.532-536
• /
• 2004

Due to the fourth-instar larvae of C. riparius have a sensitive to ecdysteroidal molting hormones for the life cycle developments, accordingly the emerged adult affected corresponding to larval phase's environments. The emerged female from larval phase exposure to DEHP observed a fact body and clumsy fling behavior in females. The body volume of treated female groups was clearly larger than that of control fe- males. In the 2D/E gel 1108 protein spots were identified. The visualized protein spots allowed extraction of 27 protein spots differed more than 3 fold in DEHP treated animals, which was approximately 2.4％ of the total protein spots. In this view, the body volume (or morphological characters) was well observed and detected faster than physiological detection for various EDCs. In this study, the body volume as a detecting po-int for EDCs suggested a bio-marker in individual levels.

• 산업기술연구
• /
• 제23권A호
• /
• pp.21-27
• /
• 2003

The bio-micro pin is usually used for biochemistry analysis. The capability of manufacturing the micro-pin and array with effective and low-cost way is very important to developers. The micro-pin is composed of "sample channel" putting liquid into already fixed volume, "flat tip" having connection with printing quantity, and "head part" for preventing it from rotation of pin in the holder. We analyzed out printing variation in accordance with shape and tip size of the micro-pin point channel, In this study, we suggested the manufacturing progress and shape demand condition of the micro-pin which could put $0.2{\mu}{\ell}$-biochemistry material into the sample volume, and will be able to produce the micro-pin which can put $10n{\ell}$-biochemistry material into the sample volume in the future.